• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.89-91
• /
• 2002

A test method that can measure the parallelism and the surface figure of an nontransparent plate using visible light is proposed. The testing system consists of a Twyman-Green interferometer. In addition, test results for the IR filter of IR MTF measuring system are described.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.105-108
• /
• 1996

In this paper, we present an interpolation schema for image resolution enhancement using fuzzy logic. Proposed algorithm can recover both low and high frequency information in image data. In general, interpolation techniques are based on linear operators which are essentially details in the original image. In our fuzzy approach, the operator itself balances the strength of its sharpening and noise suppressing components according to the properties of the input image data. The proposed interpolation algorithm is performed in three step. First logic reasoning is applied to coarsely interpret the high frequency information. These results are combined to obtain the optical output. Using our approach, resolution of the original image can be applied to various kind of image processing topics such as image enhancement, subpixel edge detection, and filtering.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.810-813
• /
• 2003

Application of inorganic silica-neodymia alloy films grown by sputtering technology to the dielectric layer of plasma display panel (PDP) is presented. The experimental results reveal that dielectric constant of the alloy films increases with neodymia concentration. Also, the alloy films act as band rejection color filter owing to sharp absorptions originating in the intratransition within the 4f shell of the $Nd^{3+}$ ion. In the optical band pass region, the transmittances of the alloy films show higher than those of commercial glass-like dielectrics. As a result, the luminance of PDP device with the alloy dielectric layer is higher than that of device with conventional dielectrics, indicating wider color gamut and higher color purity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.184-184
• /
• 2010

ITO의 전극 패턴에 따른 유기 광기전력 소자의 전기적 특성에 대해서 연구하였다. 소자의 구조는 ITO/PEDOT:PSS(90nm)/CuPc(20nm)/$C_{60}$(40nm)/LiF(0.5nm)/Al(100nm)이고, PEDOT:PSS는 스핀 코팅한 후 $120^{\circ}C$에서 20분간 건조시켰으며, 유기물은 열증착을 하여 제작하였다. ITO 전극의 패턴을 corss-bar type과 island type으로 하여 소자의 특성을 비교하였다. 광원은 500W xenon lamp를 사용하였고, optical density filter로 광원의 세기를 조절하였으며, AM 1.5G의 스펙트럼을 조사하였다. PEDOT:PSS 층을 사용함으로서 유기 광기전력 소자의 효율, 단락 전류, 그리고 개방 전압의 향상을 얻을 수 있었다. ITO 전극 패턴에 따른 광기전력 소자의 특성은 cross-bar type에 비하여 island type의 구조에서 유기 광기전력 소자의 효율이 34% 감소하였다.

• Journal of The Korean Astronomical Society
• /
• v.47 no.6
• /
• pp.311-317
• /
• 2014

Solar chromospheric surges are often reported to contain rotational motion. However, the details of the motion and driving mechanism of the surges are not yet fully understood. Recurrent surges with rotational motion at AR 10930 on the west limb are observed by Hinode Solar Optical Telescope (SOT) continuously from 11:21 UT on December 18 to 09:58 UT on December 19, 2006, using the $Ca_{II}$ H broadband filter. We analyze details of the motion including number of turns from the rise of the surge to the fall, axial speed and acceleration. During the observation, rise and fall motion accompanying rotation appears recurrently. There occur a total of 14 surges at AR 10930 over 17 hours. The average duration is 45 minutes, and the average width, and length are 8 Mm, and 39 Mm, respectively. We speculate that the surges occurred by recurrent reconnections between the twisted prominence and large untwisted flux tube.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.186-186
• /
• 2011

This paper presents the design guide of a LED red-light for naval vessels. Power consumption, luminous flux and optical characteristics of a conventional FL red-light were analyzed. Spectrum of the red-light is in ranges of 600~780 [nm]. Power consumption and luminous efficacy are 26.9 [W] and 1.1 [lm/W], respectively. From the experimental results, we proposed a 5 [W] LED red-light which save power consumption by 80 [%] and increase luminous flux over 500 [%].

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.353-356
• /
• 2002

Planar laser induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Preliminary investigation was performed to measure quantitative air excess ratio distribution in an engine fueled with LPG. It is known that fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone was excited by KrF excimer laser (248nm) and its fluorescence image was acquired by ICCD camera with a cut-of filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile was suggested. Raw images were divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which was taken by a calibration process, were converted to air excess ratio distribution. This investigation showed instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.513-516
• /
• 2002

The flow structure and heat transfer characteristics of a turbulent buoyant jet were investigated experimentally. The instantaneous temperature and velocity fields in the near field were measured using a two-frame PIV and PLIF techniques. A thin light sheet illuminated a two-dimensional cross section of the buoyant jet in which Rhodamine B was added as a fluorescent dye. The intensity variations of LIF signal from Rhodamine B molecules scattered by the laser light were captured by a CCD camera after passing an optical filter. By ensemble averaging the instantaneous temperature and velocity fields, the mean temperature and velocity fields as well as the spatial distributions of turbulent statistics were obtained. The results show the flow structure and convective heat transfer of the developing shear layer in the near field.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.2030-2038
• /
• 1995

In this study, three turbulent flame propagation models are compared using experimentally measured data of a 4 valves/cylinder spark-ignition engine. First two conventional models are B.K model and GESIM combustion model. The burning rates calculated from the two models are compared with the burning rates calculated from measured pressure data using the one-zone heat release analysis. GESIM combustion model predicts burning rates closer to the data acquired from the experiment in wide operating ranges than B-K model does. The third model is refined based on GESIM combustion model by including the effect of flame stretch, turbulent length scale band pass filter and a variable that considers flame size and the area of flame contacting the cylinder wall surface. The refined combustion model predicts burning rates closer to experimental results than GESIM combustion model does. Also, the refined combustion model predicts flame radius close to the experimental result measured by using optical fiber technique.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.814-823
• /
• 2012

Fluctuation of light intensity from the keyhole becomes more significant in full penetration welding than partial penetration welding, since the plasma produced in the keyhole can escape from the rear side of the keyhole. The plasma optical radiation emitted during Nd:YAG laser welding of S45C steel samples has been detected with a Photodiode and analyzed under different process conditions. As the results, the BOP was performed for welding, behavior of plasma, spatter or plume was monitored to determine the reference signal. Then, random combination was made for comparison with the reference signal, which aimed at verifying reliability of the welding monitoring system that this study intended to develop.