• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.475-480
• /
• 2010

가스터빈 블레이드는 터빈 가동 시 발생하는 고온화염으로부터 블레이드를 보호하고, 구조물의 표면 온도를 안전한 수준으로 낮추기 위하여 블레이드 표면에 열차폐 코팅(TBC; Thermal barrier coating)을 하여 사용하고 있다. 본 논문에서는 가스터빈 1단 블레이드에 적용되는 코팅 방식을 이용하여 코인형 시험편을 제작하였고 열화 온도 및 유지 시간의 변화에 따른 코팅 계면 산화물의 성장 거동을 분석하였다. 코팅 단면에 대하여 코팅 계면 산화물의 두께와 마이크로 비커스 경도를 측정하여 열화 특성을 평가 하였다. 또한 성분분석을 통하여 미세조직의 변화를 관찰함으로써 열차폐 코팅의 열적 열화특성을 평가하였다.

• 한국주조공학회지
• /
• 제23권3호
• /
• pp.137-146
• /
• 2003

The main purpose of this study is to investigate the effects of process parameter on alpha-case formation of Ti and TiAl castings. The previous studies showed that the molten titanium is excessively reactive to the refractory oxide mold, resulting in alpha-caes of the titanium castings regardless of composition of titanium alloys. However, the behavior of the alpha-case formation of TiAl alloy is not consistent with conventional titanium alloy. In order to investigate the alpha-case formation of Ti and TiAl castings with process parameter, especially the associated factors of investment mold such as mold material, binder and mold preheating temperature. An attempt has been made to characterize the alpha-case of titanium casting by using optical microscope, EDS, XRD, EMPA and hardness profiles. The formation of the alpha-case on the surface of pure titanium during investment casting was rather by that of solid solution with metallic element from mold material. The required mold strength was obtained with $CaZrO_3$ because of the possibility of using water soluble binder. However, the separation phenomenon between facing and back-up mold materials should be considered. The interfacial reaction of TiAl alloy showed different behavior from that of pure titanium and $Al_2O_3$ was best mold materials. The effect of binder as well as mold material on the formation of alpha-case was significant.

• 한국의류학회지
• /
• 제35권9호
• /
• pp.1085-1098
• /
• 2011

In the $21^{st}$ century, technology is a tool for the expansion of the five senses and physical ability that works as an element for posthuman identity. This study analyzes and theorizes on the characteristics of the posthuman body in fashion illustration. The method of this study analyzes documentaries about posthuman and fashion illustration. The results are as follow. Posthuman body types are classed as hybrid body, plastic surgery body, and digital body. The characteristics of the posthuman body are categorized as ultra- functional prosthetic, mythical undifferentiated, radical plastic surgery type and post-physical digitization type. The ultra-functional prosthetic type shows a restored body and upgraded functional body through a machine hybrid, cyborg suit and mannequin hybrid. It is a break from classical gender identity to form a nerve sense extension that displays physical and abstract power. The mythical undifferentiated type shows a therianthropic form, parts of an animal body, radical skin and gender bending. It represents the return to an undifferentiated world, the desire of a powerful being and the possibility of radical transformation. The radical plastic surgery type shows a photomontage of an ideal body, transgendered body, grotesque body marking, absence of partial or overall face organ and the expansion of abnormal body organs. It represents the expression of narcissism, unconscious desire, fantasy, fear and suggests an alternative ideality, sexual attachment and ambiguous gender identity. The post-physical digitization type shows an imperfect form or duplicated ego image through the omission of the body silhouette or detailed form, fragmented image using net, representative self like optical illusion using typography, an imperfect vague silhouette and immaterial body outline through the use of virtual light. It represents the lack of desire, narcissism, fluidity in a virtual space, the continued creation of a new self, ambiguous gender identity and the liberation of environment, sex, and race. Likewise, the posthuman in fashion illustration shows the absence of a species boundary, destruction of classical gender identity, a new personality and virtual self image.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.540-543
• /
• 2007

The modulation transfer function (MTF) in a camera system is a measurement of how well the system will faithfully reproduce the original scene. The electro-optical camera system consists of optics, an array of pixels, and an electronics which is related to the image signal chain. The system MTF can be cascaded with each element's MTF in the frequency domain. That is to say, the electronics MTF including the detector MTF can be recalculated easily by the acquired system MTF if the well-known test optics is used in the measuring process. A Time-Delay and Integration (TDI) detector can make a signal increase by taking multiple exposures of the same object and adding them. It can be considered the various methods to measure the MTF of the TDI camera system. This paper shows the actual and practical MTF measuring methods for the detector and electronics in the TDI camera. The several methods are described according to the scan direction as well as the TDI stages such as the single line mode and the multiple-lines mode. The measuring is performed in the in the static condition or dynamic condition to get the point spread function (PSF) or the line spread function (LSF). Especially, the dynamic test bench is used to simulate on track velocity to synchronize with TDI read out frequency for the dynamic movement.

• 한국표면공학회지
• /
• 제42권3호
• /
• pp.133-138
• /
• 2009

Effects of bipolar pulse driving frequency between 50 kHz and 250 kHz on the discharge shapes were analyzed by measuring plasma characteristics by OES (Optical Emission Spectroscopy) and Langmuir probe. Plasma characteristics were modeled by a simple electric field analysis and fluid plasma modeling. Discharge shapes by a continuous dc and bipolar pulsed dc were different as a dome-type and a vertical column-type at the cathode. From OES, the intensity of 811.5 nm wavelength, the one of the main peaks of Ar, decreased to about 43% from a continuous dc to 100 kHz. For increasing from 100 kHz to 250 kHz, the intensity of 811.5 nm wavelength also decreased by 46%. The electron density decreased by 74% and the electron temperature increased by 36% at the specific position due to the smaller and denser discharge shape for increasing pulse frequency. Through the numerical analysis, the negative glow shape of a continuous dc were similar to the electric potential distribution by FEM (Finite Element Method). For the bipolar pulsed dc, we found that the electron temperature increased to maximum 10 eV due to the voltage spikes by the fast electron acceleration generated in pre-sheath. This may induce the electrons and ions from plasma to increase the energetic substrate bombardment for the dense thin film growth.

• 한국광학회지
• /
• 제15권5호
• /
• pp.423-428
• /
• 2004

320${\times}$240 배열의 중적외선 대역(3.7 $\mu\textrm{m}$∼4.8 $\mu\textrm{m}$) MCT(HgCdTe) 검출기를 이용하여 분해능과 신뢰도가 대폭 향상된 소형$.$고성능의 적외선 열상센서를 설계, 제작하였다. 개발된 열상센서는 1∼20배의 고배율 줌 광학계로 설계하고 미세주사 기법을 적용하여 640${\times}$480의 화소를 재현하여 항공기의 항법 보조로부터 표적획득에 이르기까지 다양한 활용이 가능하다. 적용된 적외선 줌 광학계는 릴레이 형태의 재결상계로 설계되었으며 미세주사 장치의 개발로 7.6 cycles/mrad 까지 분해가 가능하며 최저배율에서 40$^{\circ}$${\times}$30$^{\circ}$의 초광각(super wide field of view)의 시계를 갖는다. 또한 불균일 보정기법과 히스토그램 가변방식의 결합을 통한 첨단 열 영상처리 기법을 제안하여 열상센서에 적용함으로써 고성능의 실시간 디지털 영상처리를 가능케 하였다. 본 신호처리기의 개발을 통해 획득된 열영상의 최소분해가능 온도차는 고배율에서 0.05K(＠1cycles/mrad) 이하의 우수한 결과를 보였다.

• 한국광학회지
• /
• 제19권1호
• /
• pp.9-14
• /
• 2008

본 논문에서는 테라헤르츠 대역에서 동작하는 새로운 구조의 Yagi-Uda 안테나를 설계하였다. 제안한 Yagi-Uda 안테나는 안테나의 driver를 반 파장 다이폴이 아닌 전 파장 다이폴을 사용함으로써 공진주파수에서 $2000{\Omega}$ 정도의 높은 입력 저항을 얻을 수 있었다. 바이어스 선에 Photonic Bandgap 구조를 적용하여 바이어스 선로로의 전류누설을 최소화 하였고, 안테나를 얇은 기판에 설계함으로써 기판의 비유전율로 인한 안테나의 임피던스 저하를 막고 Yagi-Uda 안테나 고유의 단방향 지향적인 복사특성을 나타나게 하였다. 따라서 제안한 Yagi-Uda 안테나는 포토믹서와의 임피던스 부정합 문제를 개선하여 테라헤르츠파의 출력을 증가 시킬 수 있을 것이라 예상한다.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.263-270
• /
• 2017

Solar radiation data measured by pyranometers is of fundamental use in various fields. In the field of atmospheric optics, the measurement of solar energy must be precise, and the equipment needs to be maintained frequently. However, there seem to be many errors with the existing type of pyranometer, which is an element of the solar-energy observation apparatus. In particular, the error caused by the thermal dome effect occurs because of the thermal offset generated from a temperature difference between outer dome and inner casing. To resolve the thermal dome effect, intensive observation was conducted using the method and instrument designed by Ji and Tsay. The characteristics of the observed global solar radiation were analyzed by classifying the observation period into clear, cloudy, and rainy cases. For the clear-weather case, the temperature difference between the pyranometer's case and dome was highest, and the thermal dome effect was $0.88MJ\;m^{-2}\;day^{-1}$. Meanwhile, the thermal dome effect in the cloudy case was $0.69MJ\;m^{-2}\;day^{-1}$, because the reduced global solar radiation thus reduced the temperature difference between case and dome. In addition, the rainy case had the smallest temperature difference of $0.21MJ\;m^{-2}\;day^{-1}$. The quantification of this thermal dome effect with respect to the daily accumulated global solar radiation gives calculated errors in the cloudy, rainy, and clear cases of 6.53%, 6.38%, and 5.41% respectively.

• 한국공간구조학회논문집
• /
• 제9권3호
• /
• pp.67-74
• /
• 2009

가진력의 영향을 평가하기 위해 이용되는 압전소자와 물체의 변형량을 분석하기 위해 사용되는 광섬유 센서와 변형 게이지는 각종 시험과 실험에 널리 사용되고 있다. 본 연구에서는 케이블 시스템에서 발생한 손상을 검토하기 위해 압전소자와 광섬유센서를 이용하였다. 케이블 시스템은 압축이나 휨이 발생하지 않고 막구조에서 단지 인장력을 분담한다. 그러나 기존의 안전진단법을 이용하여 케이블 시스템의 손상을 판단하는 것은 전체구조의 특이한 구조거동 등으로 검토하기 어렵다. 인장부재에서 케이블의 풀림과 할렬이 발생하면 진동을 유발하기 때문에 압전소자를 케이블의 손상을 검토하기 위해 이용하였으며, 이를 광섬유 센서를 이용한 실험의 결과와 비교하였다. 본 연구는 인장응력 하에 케이블 시스템의 손상을 검토하는 방법을 제안하기 위한 실험적 연구이다.

• 천문학회보
• /
• 제39권1호
• /
• pp.53.2-53.2
• /
• 2014

IGRINS, the Immersion GRating INfrared Spectrometer, is a near-infrared wide-band high-resolution spectrograph jointly developed by the Korea Astronomy and Space Science Institute and the University of Texas at Austin. IGRINS employs three HAWAII-2RG focal plane array (FPA) detectors. The mechanical mounts for these detectors serves a critical function in the overall instrument design: Optically, they permit the only positional compensation in the otherwise "build to print" design. Thermally, they permit setting and control of the detector operating temperature independently of the cryostat bench. We present the design and fabrication of the mechanical mount as a single module. The detector mount includes the array housing, a housing for the SIDECAR ASIC, a field flattener lens holder, and a support base. The detector and ASIC housing will be kept at 65 K and the support base at 130 K. G10 supports thermally isolate the detector and ASIC housing from the support base. The field flattening lens holder attaches directly to the FPA array housing and holds the lens with a six-point kinematic mount. Fine adjustment features permit changes in axial position and in yaw and pitch angles. We optimized the structural stability and thermal characteristics of the mount design using computer-aided 3D modeling and finite element analysis. Based on the computer simulation, the designed detector mount meets the optical and thermal requirements very well.