• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.340-343
• /
• 2002

We report here our recent progress in the development and commercialization of polyfluorenes emitting red, green and blue (ROB) colors as materials for light emitting diodes (LEDs). Our patented version of the Suzuki coupling process has been used to synthesize a variety of fluorenebased homopolymers and copolymers emitting colors across the entire visible spectrum. The optical and electronic properties of the polymers are tailored through selective incorporation of different aromatic units into the polyfluorene backbone. Our latest green emitter, reported herein, provides very efficient devices with a low turn-on voltage of 2.25 V, a peak efficiency of 10.5 Cd/A at 6,600 Cd/$m^2$ at 4.85 V. These devices maintain an efficiency of greater than 10 Cd/A up to 50,000 Cd/$m^2$ and demonstrate very good stability as exemplified by a device half-life of greater than 1,500 hours starting from 1,100 Cd/$m^2$. Considerable progress has also been made with red and blue emitters and will be the subject of this presentation.

• 대한의용생체공학회:의공학회지
• /
• 제31권4호
• /
• pp.292-301
• /
• 2010

To restore visual sensation of blind patients, we have proposed a fully implantable retinal prosthesis comprising an three dimensionally (3D) stacked retinal chip for transforming optical signal to electrical signal, a flexible cable with stimulus electrode array for stimulating retina cells, and coupling coils for power transmission. The 3D stacked retinal chip is consisted of several LSI chips such as photodetector, signal processing circuit, and stimulus current generator. They are vertically stacked and electrically connected using 3D integration technology. Our retinal prosthesis has a small size and lightweight with high resolution, therefore it could increase the patients` quality of life (QOL). For realizing the fully implantable retinal prosthesis, we developed a retinal prosthesis module comprising a retinal prosthesis chip and a flexible cable with stimulus electrode array for generating optimal stimulus current. In this study, we used a 2D retinal chip as a prototype retinal prosthesis chip. We fabricated the polymide-based flexible cable of $20{\mu}m$ thickness where 16 channels Pt stimulus electrode array was formed in the cable. Pt electrode has an impedance of $9.9k{\Omega}$ at 400Hz frequency. The retinal prosthesis chip was mounted on the flexible cable by an epoxy and electrically connected by Au wire. The retinal prosthesis chip was cappted by a silicone to pretect from corrosive environments in an eyeball. Then, the fabricated retinal prosthesis module was implanted into an eyeball of a rabbit. We successfully recorded electrically evoked potential (EEP) elicited from the rabbit brain by the current stimulation supplied from the implanted retinal prosthesis module. EEP amplitude was increased linearly with illumination intensity and irradiation time of incident light. The retinal prosthesis chip was well functioned after implanting into the eyeball of the rabbit.

• 한국진공학회지
• /
• 제21권6호
• /
• pp.287-294
• /
• 2012

위성체가 작동하는 우주환경인 초고진공상태에서는 각 부품에서 발생 할 수 있는 기체방출로 인해 위성체가 오염되어 위성체의 성능이 저하될 수 있으며, 특히 광학렌즈를 오염시킴으로써 위성체 본연의 임무수행 실패라는 결과를 초래할 수도 있다. 최근 항공우주분야에서 활용 범위가 넓어지고 있는 PZT-5 계열 압전진동자의 위성부품 활용성 연구를 위하여 먼저 Collected Volatile Condensable Material 및 Total Mass Loss을 측정하여 규정된 0.1% 및 1.0% 이하의 값을 얻었고, 한국항공우주연구원에 설치된 베이크아웃(bake-out) 챔버를 이용하여 고온 및 고진공상태에서 500 $ng/cm^2/hr$ 이하의 낮은 Thermoelectric Quartz Crystal Microbalance 값을 얻어 위성체 부품으로의 적합성을 재확인하였다. 압전진동자에 대한 고진공 환경 전후의 압전 특성을 비교 분석한 결과 진공환경에 의한 전기-기계적 특성은 1% 미만으로 큰 변화가 없음을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.157-157
• /
• 2010

Vertical-structure light-emitting diodes (V-LEDs) by laser lift-off (LLO) have been exploited for high-efficiency GaN-based LEDs of solid-state lightings. In V-LEDs, emitted light from active regions is reflected-up from reflective ohmic contacts on p-GaN. Therefore, silver (Ag) is very suitable for reflective contacts due to its high reflectance (>95%) and surface plasmon coupling to visible light emissions. In addition, low contact resistivity has been obtained from Ag-based ohmic contacts annealed in oxygen ambient. However, annealing in oxygen ambient causes Ag to be oxidized and/or agglomerated, leading to degradation in both electrical and optical properties. Therefore, preventing Ag from oxidation and/or agglomeration is a key aspect for high-performance V-LEDs. In this work, we demonstrate the enhanced thermal stability of Ag-based Ohmic contact to p-GaN by reducing the thermal compressive stress. The thermal compressive stress due to the large difference in CTE between GaN ($5.6{\times}10^{-6}/^{\circ}C$) and Ag ($18.9{\times}10^{-6}/^{\circ}C$) accelerate the diffusion of Ag atoms, leading to Ag agglomeration. Therefore, by increasing the additional residual tensile stress in Ag film, the thermal compressive stress could be reduced, resulting in the enhancement of Ag agglomeration resistance. We employ the thin Ni layer in Ag film to form Ni/Ag mutli-layer structure, because the lattice constant of NiO ($4.176\;{\AA}$ is larger than that of Ag ($4.086\;{\AA}$). High-resolution symmetric and asymmetric X-ray diffraction was used to measure the in-plane strain of Ag films. Due to the expansion of lattice constant by oxidation of Ni into NiO layer, Ag layer in Ni/Ag multi-layer structure was tensilely strained after annealing. Based on experimental results, it could be concluded that the reduction of thermal compressive stress by additional tensile stress in Ag film plays a critical role to enhance the thermal stability of Ag-based Ohmic contact to p-GaN.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.394-394
• /
• 2009

Water solubility of conjugated polymers may offer many applications. Potential applications of water-soluble conjugated polymers include the polymer light-emitting diode and new materials for nano and micro hollow-capsules, and bio- or chemo-sensors. We synthesized neutral polyfluorenes containing bromo-alkyl groups by the palladium catalyzed Suzuki coupling reaction. Bromo-alkyl side groups in neutral polyfluorenes were quaternized by tri-methyl amine solution. The electrochemical and optical properties of water-soluble conjugated polymers are discussed. This novel synthesized water-soluble conjugated polymers were used as a interfacial dipole layer between active layer and metal cathode in polymer solar cell for enhancement of open-circuit voltage (Voc), which is one of the most critical factors in determining device characteristics. We also investigated the device performance of polymer solar cell with different metal cathode such as Al, Ag, Au and Cu. In polymer solar cell, novel cationic water-soluble conjugated polymers were inserted between active layer and high-work function cathode (Al, Ag, Au and Cu).

• 센서학회지
• /
• 제9권1호
• /
• pp.15-21
• /
• 2000

단일모드 광섬유와 평면도파로 결합기의 열에 의하여 공진파장이 이동하는 현상을 이용한 광섬유형 온도센서를 구현하였다. 평면도파로는 열에 의한 굴절률 변화가 큰 열광학폴리머를 사용하였다. 광섬유 연마과정 등의 소자제작 공정을 소개하고, 편광에 무관하게 동작하는 광소자 구조를 실험으로 검증하였다. 제작된 소자의 편광에 따른 공진파장의 차이는 2nm 이하였다. 실온($24^{\circ}C$)에서 $90^{\circ}C$까지의 온도변화에 의한 공진파장의 변화는 $-0.54nm/^{\circ}C$, $-3nm/^{\circ}C$의 특성을 보였다.

• 센서학회지
• /
• 제24권3호
• /
• pp.202-207
• /
• 2015

As a feasibility study on development of a gamma imaging probe, we developed a scintillating film-based gamma imaging detector that can obtain scintillation images with information of gamma-ray distribution. The scintillating film-based gamma imaging detector was composed of a sensing probe, an image intensifier, and a beam profiler. To detect and transmit scintillation image, the sensing probe was fabricated by coupling a scintillating film, a fiber-optic image conduit, and a fiber-optic taper, consecutively. First, the optical images of USAF 1951 resolution target were obtained and then, modulation transfer function values were calculated to test the image quality of the sensing probe. Second, we measured the scintillation images according to the activity of the 137Cs and the distance between the surface of 137Cs and the distal-end of sensing probe. Finally, the intensities of scintillating light as functions of the activity and the distance were evaluated from the region of interest in the scintillation image. From the results of this study, it is expected that a fiber-optic gamma imaging detector can be developed to detect gamma-rays emitted from radiopharmaceuticals during radioimmunoguided surgery.

• 한국광학회지
• /
• 제3권4호
• /
• pp.227-233
• /
• 1992

분할디스크형 글라스레이저 증폭기를 개발하기 위하여 이를 해석 설계할 수 있는 시뮬레이션 코드를 작성했다. 레이저매질에서의 열부하를 감소시키고, 플래시램프의 방사스펙트럼과 레이저글라스의 흡수 스펙트럼 간의 결합효율을 높이기 위해서는 전류밀도를 2000-4000A/$\textrm{cm}^{2}$로 유지하여 단파장에서의 방사에너지를 줄여야 한다. 디스크 증폭기에서 같은 부피를 갖는 매질을 3등분하여 냉각표면적을 3배로 늘렸을 때 온도상승치는 30% 정도로 떨어졌다. 단면펌핑 분할 디스크형 증폭기의 설계에서는 각 글라스 간의 $Nd^{3+}$ 도핑율에 차등을 주어야 하고 플래시램프 앞에 있는 매질의 흡수계수 $\alpha$ 와 두께 d의 곱인 $\alpha$d가 0.26 전후가 적절하다는 것을 알았다.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3041-3046
• /
• 2014

Blue emitting materials, 9,10-bis-biphenyl-4-yl-anthracene (AC-P), 9,10-bis-[1,1';4',1"]terphenyl-4-yl-anthracene (AC-DP), and 9,10-bis[3",5"-deiphenyltriphenyl-4'-yl]anthracene (AC-TP) were synthesized through boration and Suzuki aryl-aryl coupling reaction. EL performance of blue light-emitters was optimized and improved by varying the chemical structures of the side groups. In the thin film state, the three materials exhibit $PL_{max}$ values in the range of 442-456 nm. EL device with the synthesized compounds in the following configuration was fabricated: ITO/4,4',4"-tris(N-(2-naphthyl)-N-phenylamino)triphenylamine (2-TNATA) 60nm/N,N'-bis (naphthalene-1-yl)-N,N'-bis(phenyl)benzidine (NPB) 15nm/synthesized blue emitting materials (30nm)/1,3,5-tri(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl (TPBi) 20nm/LiF 1nm/Al 200nm. The current efficiency and C.I.E. value of AC-TP were 3.87 cd/A and (0.15, 0.12). A bulky and non-planar side group helps to prevent ${\pi}-{\pi}^*$ stacking interaction, which should lead to the formation of more reliable amorphous film. This is expected to have a positive effect on the high efficiency of the operating OLED device.

• 한국광학회지
• /
• 제18권6호
• /
• pp.441-446
• /
• 2007

OLED 소자는 유리기판과 공기 층의 경계면에서 발생하는 전반사와 ITO-유기층으로 형성되는 광도파로를 따라 진행하는 도파모드 결합으로 인해 내부에서 생성된 빛의 80% 이상이 외부로 추출되지 못하게 된다. 본 연구에서는 마이크로 렌즈 어레이와 회절격자 레지스트 층을 이용하여 소자 내부에서 손실되는 빛을 외부로 추출시킴으로써 OLED의 발광효율을 향상시킨다. 마이크로 렌즈 어레이를 이용하여 유리기판-공기 전반사로 인해 내부에 갇히는 빛을 외부로 출력시키고, ITO 와 유기물 사이에 회절격자 레지스트 층을 삽입하여 ITO-유기층 광도파로에 갇힌 빛들을 수직방향으로 추출될 수 있도록 하였다. 제작된 OLED 소자에 전류밀도 $20mA/cm^2$를 인가한 경우, 마이크로 렌즈 어레이를 적용한 OLED에서 22%의 효율 개선을 얻었고, 회절격자 레지스트 층을 가지는 OLED 의 경우 41%의 효율개선을 얻을 수 있었다.