• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.28-29
• /
• 2000

Optical power splitters and/or couplers are important components for optical signal distribution between channels both in wavelength division multiplexing(WDM) systems and photonic integrated circuits(PICs). Since polarization is usually not known after propagation in an optical fiber, passive WDM components have to be polarization insensitivity, Compared to alternatives such as directional couplers or Y-junction splitters, splitters based on multimode interference(MMI) have found a growing interest in recent yens because of their desirable characteristics, such as compact size, low excess loss, wide bandwidth, polarization independence, and relaxed fabrication tolerances$^{(1)}$ . These devices have been fabricated in polymers, silica, or III-V semiconductor materials. A1 $\times$ 4 MMI power splitter on InP materials that were suitable for application in the 1.55-${\mu}{\textrm}{m}$ region$^{(2)}$ . However, the fabrication process of the structure is too complicated and the photolithography tolerance is very tight. Also, a 1 $\times$ 16 InGaAsP/InP MMI power splitter with an excess loss of 2.2dB and a splitting ratio of 1.5dB was demonstrated by using deep etching$^{(3)}$ . The deep etching of the sidewalls through the entire guide layer of the slab waveguide resulted in a number of drawbacks$^{(4)}$ . (omitted)

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.29-34
• /
• 2004

We present the first demonstration of waveguide-type depleted optical thyristor laser diode with InGaAs/InGaAsP multiple quantum well structure. The measured switching voltage and current are 4.63 V and 10uA respectively. The holding voltage and current are respectively 0.59 V, 20uA. The lasing threshold current at the temperature of $25^{\circ}C$ and $10^{\circ}C$ are 111 mAA and 72.5 mA, respectively. The lasing wavelength is centered at 1.561um at a bias current equal to 1.41 times threshold.

• Journal of Mechanical Science and Technology
• /
• v.15 no.3
• /
• pp.300-308
• /
• 2001

Tracking of moving objects within video streams is a complex and time-consuming process. Large number of moving objects increases the time for computation of tracking the moving objects. Because of large computations, there are real-time processing problems in tracking of moving objects. Also, the change of environment causes errors in estimation of tracking information. In this paper, we present a new method for tracking of moving objects using optical flow motion analysis. Optical flow represents an important family of visual information processing techniques in computer vision. Segmenting an optical flow field into coherent motion groups and estimating each underlying motion are very challenging tasks when the optical flow field is projected from a scene of several moving objects independently. The problem is further complicated if the optical flow data are noisy and partially incorrect. Optical flow estimation based on regulation method is an iterative method, which is very sensitive to the noisy data. So we used the Combinatorial Hough Transform (CHT) and Voting Accumulation for finding the optimal constraint lines. To decrease the operation time, we used logical operations. Optical flow vectors of moving objects are extracted, and the moving information of objects is computed from the extracted optical flow vectors. The simulation results on the noisy test images show that the proposed method finds better flow vectors and more correctly estimates the moving information of objects in the real time video streams.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.89-90
• /
• 2006

• Journal of Sensor Science and Technology
• /
• v.19 no.3
• /
• pp.184-190
• /
• 2010

In this paper, a remote submersion warning system based on multi-mode optical fiber(MMF) sensors and a wireless sensor network(WSN) are proposed. To improve the reliability and stability of the sensors, the dual optical fiber sensors combined to the optical coupler are demonstrated. A slave zigbee as a wireless sensor module was used as a platform to monitor and record the signal from the MMF sensors and then transmits these information to a master zigbee wirelessly. The monitoring system running the $LabVIEW^{(R)}$ software was connected to the internet to support the short message service(SMS) through extensible markup language(XML) web service. No matter where the managers are, they can always receive the real-time remote-monitoring data for safety check.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.467-470
• /
• 2013

We propose a blind feedforward phase noise mitigation method in the time-domain for a coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems. By exploiting the redundancy of the cyclic prefix (CP), the proposed scheme acquires the overall phase noise difference information during an OFDM block and attempts to mitigate the phase noise in the time domain using a linear approximation. The proposed algorithm mitigates common phase error (CPE) and inter-carrier-interference (ICI) due to phase noise simultaneously, improving the system performance, especially when decision-directed equalizers are used. The simulation results demonstrate the effectiveness of the proposed feedforward phase noise mitigation approach in time domain.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.39-43
• /
• 2022

Underwater optical wireless communication (UOWC) is a good candidate for high-speed underwater wireless communication. In this work, we compare the performance of several modulation techniques for a UOWC system consisting of a light-emitting diode (LED) with an operating wavelength of 405 nm and a Si avalanche photodiode (APD). In this work, we consider six modulation schemes: 4-quadrature amplitude modulation (QAM), 8-QAM, quadrature phase shift keying (QPSK), binary phase shift keying (BPSK), on-off keying (OOK), and 4-pulse amplitude modulation (PAM). We also consider the cases of pure water and seawater for the working conditions. Our results show that 4-QAM and 8-QAM perform the best, in terms of communication distance and transmission power efficiency, for all water types considered.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.157-161
• /
• 2008

A wavelength-selective reflector, composed of a double-ring-resonator add/drop filter and a loop-back mirror at the drop port to be used for a hybrid-integrated tunable laser is designed and fabricated. High-index-contrast polymer waveguide is used to realize a compact device as small as $2mm{\times}0.4mm$. The radii of the rings are slightly different from each other to obtain a wide wavelength tuning via a vernier effect. Peak reflectivity is measured to be 52% for TE mode and polarization-dependent wavelength shift is 0.95 nm. The tuning range is measured to be about 42 nm for applied current as small as 46 mA.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.657-666
• /
• 2015

We propose a two-stage resource allocation algorithm for the high link utilization of an orthogonal frequency-division multiplexing passive optical network (OFDM-PON). An OFDM-PON is assumed to use a synchronous frame structure in supporting service differentiation. In distributing resources, the proposed algorithm first allocates a time window for each optical network unit (ONU), and then it arranges a subchannel, which is a group of subcarriers. This algorithm needs to satisfy two constraints. First, computations for the resource allocation should be done using a frame unit. Second, an ONU has to use a single subchannel to send upstream data for multiple services within a frame duration. We show through a computer simulation that the proposed algorithm improves the link utilization.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.405-407
• /
• 2007

A globally adaptive load-balanced routing algorithm for torus interconnection networks is proposed. Unlike previously published algorithms, this algorithm employs a new scheme based on collision detection to handle deadlock, and has higher routing adaptability than previous algorithms. Simulation results show that our algorithm outperforms previous algorithms by 16% on benign traffic patterns, and by 10% to 21% on adversarial traffic patterns.