• Journal of Internet Computing and Services
• /
• v.8 no.4
• /
• pp.41-49
• /
• 2007

Ethernet passive optical network(EPON) is the next-generation technology for supporting services of high-quality at low-cost. In the EPON, all optical network units(ONUs) have to share a limited uplink channel for upstream data. In order to satisfy bandwidth demands of users on high-capacity local access networks(LANs), the optical line terminal(OLT) efficiently divides and allocates time slots of uplink channel to all ONUs. We discuss previous schemes for dynamic bandwidth allocation(DBA), such as interleaved polling with adaptive cycle time(IPACT) and sliding cycle time(SLICT). In this paper, dynamic right sizing of maximum-windows(DRSM), as a novel bandwidth allocation service, is proposed for more effective and efficient time slot allocation of the uplink channel. DRSM which is based on past information of bandwidth allocated by OLT calculates maximum available bandwidth and dynamically alters the maximum window size for the next ONU. This scheme does not only exert every effort to meet bandwidth demands of ONUs with the possible scope, it also seeks fairness of bandwidth allocation among ONUs.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.8
• /
• pp.19-29
• /
• 2001

The recent explosion in the Internet applications, Internet. host number and the traffic in the IP backbone network is posing new challenges for transport network. This requires a high-speed IP backbone network that has a substantially higher bandwidth than the one offered by current networks, which prompts the development of all-optical network. To obtain optical network utilization gains, we need a software which establishs logical topology to make possible the efficient use or physical topology, and control the optical network in combination with the IP layer routing protocols. Finally, the logical topology is required higher efficient than physical topology. For this an efficient algorithm for the routing and wavelength assignment(RWA) in the WDM all-optical network is necessary. In this paper, two kinds of heuristic algorithms to establish logical topology for WDM networks and arc applied to the design of logical topology of domestic backbone network. These algorithms are found to work quite well and they arc compared with each other in terms of blocking rate, etc.

• Journal of KIISE:Information Networking
• /
• v.36 no.4
• /
• pp.360-368
• /
• 2009

Recently, broadband access networks have been competitively deployed all over the world with the development of various multimedia services for such a network. ETRI(Electronics and Telecommunications Research Institute) built the FTTH(Fiber-To-the-Home) service center to develop a next-generation equipment and a high-quality service/platform as well as to promote domestic industry in the field of optical communication. The FTTH service center has a variety of test equipments such as FTTH standard testbed for a BMT(bench mark test), a network operation center, and IPTV service equipments. Also, ETRI deployed a new type of commercial optical access networks cooperating with ISP(Internet Service Provider). This paper presents the performance evaluation of FTTH E-PON(Ethernet Passive Optical Network) system as a platform for TPS(Triple Play Service) based on QoS(Quality of Service) and QoE(Quality of Expericence) issues. This FTTH E-PON system is successfully demonstrated as an optical access network system by commercial network service provider and the FTTH service center of ETRI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.1-10
• /
• 2002

With the explosive growth of the number of Internet users and Internet-related services, the research on construction of broadband Optical Internet by using WDM technologies is actively is actively progressed. In this paper, we design the offset time decision (OTD) algorithm for supporting the QoS in optical networks based on optical burst switching (OBS), which is the new switching paradigm, and evaluate the performance of it. The proposed algorithm determines a reasonable offset time considering traffic load of network and the number of wavelengths to guarantee the burst loss rate (BLR) of high priority Internet traffic as a QoS parameter. In order to design the proposed OTD algorithm, firstly we make the new burst loss formula, which includes the effect of offset time. The decision of offset time corresponding to the requested BLR, however, should use the reverse formula of proposed one, thus we are not able to use it without any changes. In this paper, we define the heuristic loss formula (HLF) that can be changed into reversed formula by using the proposed formula and proportional equation considering its characteristics. Finally we show the OTD algorithm to decide the offset time by using HLF. We show that the requested BLR is guaranteed under various traffic load with the determinded offset time by using the proposed OTD algorithm.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.73-74
• /
• 2006

In this paper, we designed, constructed and evaluated the system for the FTTH suited to a residence and apartment using CWDM-PON techniques. These systems have capacity to service at 100Mbps rate to 384 users in the same breath. Also, the services include the internet, CATV, IPTV and wireless LAN. In the case of wire network, the data could be transmitted by UTP cable and optical fiber and case of wireless one, the data transmitted using WLAN. The distance between the cental office and the user is 20km and the data rate is 100Mbps maximum. Of course, the optical network used just one fiber optical core. For the basic material, we obtained the characteristics of optical transceiver module, Mux/Demux and transmission qualities depends on the environment.

• Journal of Sensor Science and Technology
• /
• v.19 no.3
• /
• pp.184-190
• /
• 2010

In this paper, a remote submersion warning system based on multi-mode optical fiber(MMF) sensors and a wireless sensor network(WSN) are proposed. To improve the reliability and stability of the sensors, the dual optical fiber sensors combined to the optical coupler are demonstrated. A slave zigbee as a wireless sensor module was used as a platform to monitor and record the signal from the MMF sensors and then transmits these information to a master zigbee wirelessly. The monitoring system running the $LabVIEW^{(R)}$ software was connected to the internet to support the short message service(SMS) through extensible markup language(XML) web service. No matter where the managers are, they can always receive the real-time remote-monitoring data for safety check.

• Journal of Sensor Science and Technology
• /
• v.32 no.1
• /
• pp.22-30
• /
• 2023

Innovative and advanced technologies, including robots, augmented reality, virtual reality, the Internet of Things, and wearable medical equipment, have largely emerged as a result of the rapid evolution of modern society. For these applications, pressure monitoring is essential and pressure sensors have attracted considerable interest. To improve the sensor performance, several new designs of pressure sensors have been researched based on resistive, capacitive, piezoelectric, optical, and triboelectric types. In particular, optical pressure sensors have been actively studied owing to their advantages, such as robustness to noise and remote sensing capability. Herein, a review of recent research on optical pressure sensors with self-powered sensing, remote sensing, high spatial resolution, and multimodal sensing capabilities is presented from the viewpoints of design, fabrication, and signal processing.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.251-257
• /
• 2010

In this paper, we propose modified algorithm of motion vector detection for the pixel of image in the optical sensor. It is designed to reduce the amount of operation and have more accuracy in the motion detection than previous block matching algorithm. The proposed algorithm is implemented with Cyclone and fabricated using SEC 0.35um CMOS 1-poly-4-metal technology. The result of test with CARTESIAN ROBOT meets the desired performance.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.1
• /
• pp.1-15
• /
• 2005

In this paper, we deal with a mesh network design problem arising from the deployment of WDM for the optical internet. The mesh network consists of mesh topology for satisfying traffic demand while minimizing the cost of WDM, OXC, and fiber cables. The problem seeks to find an optimal routing of traffic demands in the network such that the total cost is minimized. We formulate the problem as a mixed-integer programming model and devise a tabu search heuristic procedure. Also we develop an optical internet design system that implements the proposed tabu search heuristic procedure. We demonstrate the computational efficacy of the proposed algorithm, compared with CPLEX 8.0.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.47-52
• /
• 2011

In this paper, to evaluate the design properties of 3D optical multimode interference (MMI) couplers with ultracompact width, modal transmission line theory and effective dielectric method are combined with together. A coupling efficiency based on the composed approach is defined, and the coupling length is numerically determined for the design of 3 dB coupler, cross coupler and bar coupler. The simulation result shows that the designed MMI coupler has a low insertion loss and a high splitting ratio.