• International Journal of Computer Science & Network Security
• /
• v.21 no.1
• /
• pp.6-11
• /
• 2021

Routing protocols play a pivotal role in the energy management and lifespan of any Wireless Sensor Network. Lower network lifetime has been one of the biggest concerns in LEACH protocol due to dead nodes. The LEACH protocol suffers from uneven energy distribution problem due to random selection of a cluster head. The cluster head has much greater responsibility compared to other non- cluster head nodes and consumes greater energy for its roles. This results in early dead nodes due to energy lost for the role of cluster- head. This study proposes an approach to balance the energy consumption of the LEACH protocol by using a semi-deterministic opportunity coefficient to select the cluster head. This is calculated in each node with the battery energy level and node ID. Ultimately, based on the opportunity cost, cluster head will be selected and broadcasted for which other nodes with higher opportunity cost will agree. It minimizes the chances of nodes with lower battery level being elected as cluster head. Our simulation experiments demonstrate that cluster heads chosen using our proposed algorithm perform better than those using the legacy LEACH protocol.

• The Journal of Fisheries Business Administration
• /
• v.25 no.1
• /
• pp.1-17
• /
• 1994

Coastal economic activities usually generate externalities to other economic activities. The conflicts between coastal economic activities, especially land fillings and reclamations, and fisheries in coastal waters pose a typical one, which sometimes causes some social conflicts. In this regard, as the contents and requirements for rules and regulations on fisheries compensation may have important implications for solving such problems, important is to review rationales fur the formulas in calculating fisheries compensation. The purpose of this paper is to review the formulas for fisheries compensation from the economic view points, to highlight some problems and to suggest more appropriate formulas. It is found that the current formulas of fisheries compensation are not properly based on economic concepts and valuation techniques. Main problems are related, as followings, to the coefficient(0.8) employed in the formula, to fishermen's own wages and to current values of invested assets such as fishing boats and nets, etc.. First, it is not clear what the coefficient(0, 8) means. In Japan's case, the coefficient was assumed to reflect the opportunity cost of fishermen's own wages, but it was disappeared from the formula after the self-wage came to be included in totaling fishing cost. As our new formula will include the self-wage in fishing cost, the coefficient(0.8) should be excluded. Second, according to our formula, the current value of invested assets is added to total operating compensation, which will overestimate total compensation. Therefore, it is suggested that total present value of the assets to be invested during the business life should be deducted from total operating compensation. Third, as the self-wage will be included in total cost, opportunity cost for finding new jobs should be newly added to the formula. Finally, this paper also conducted a comparative case study considering above-mentioned factors. The case study showed that the current formulas overestimated total fisheries compensation.

• Journal of Information Technology Applications and Management
• /
• v.21 no.4
• /
• pp.97-125
• /
• 2014

This study investigates the relationship between stock index and its associated nearby futures markets based on the cost-of-carry model. The purpose of this study is to explore the existence of mispriced futures contracts, and to test whether traders can earn trading profits in real financial market using the information about the mispriced futures contracts. This study suggests the concordance correlation coefficient to investigate the existence of mispriced futures contracts. The concordance correlation coefficient gives a desirable result for trading profits that results from a comparative analysis among profits from trading at the time to indicate trading opportunities determined by the degree of the difference between the observed market price and the theoretical price of a futures contract. In addition, this study also explains that the concordance correlation coefficient developed from the mean square error (MSE) has a statistically theoretical meaning. In conclusion, this study shows that the concordance correlation coefficient is appropriate for analyzing the relationship between the observed stock index futures market price and the theoretical stock index futures price derived from the cost-of-carry model.

• Coupled systems mechanics
• /
• v.4 no.4
• /
• pp.279-295
• /
• 2015

The article presents a theoretical-experimental approach developed for modeling the coefficient of sliding friction in the dynamic system tool-workpiece in slide diamond burnishing of low-alloy unhardened steels. The experimental setup, implemented on conventional lathe, includes a specially designed device, with a straight cantilever beam as body. The beam is simultaneously loaded by bending (from transverse slide friction force) and compression (from longitudinal burnishing force), which is a reason for geometrical nonlinearity. A method, based on the idea of separation of the variables (time and metric) before establishing the differential equation of motion, has been applied for dynamic modeling of the beam elastic curve. Between the longitudinal (burnishing force) and transverse (slide friction force) forces exists a correlation defined by Coulomb's law of sliding friction. On this basis, an analytical relationship between the beam deflection and the sought friction coefficient has been obtained. In order to measure the deflection of the beam, strain gauges connected in a "full bridge" type of circuit are used. A flexible adhesive is selected, which provides an opportunity for dynamic measurements through the constructed measuring system. The signal is proportional to the beam deflection and is fed to the analog input of USB DAQ board, from where the signal enters in a purposely created virtual instrument which is developed by means of Labview. The basic characteristic of the virtual instrument is the ability to record and visualize in a real time the measured deflection. The signal sampling frequency is chosen in accordance with Nyquist-Shannon sampling theorem. In order to obtain a regression model of the friction coefficient with the participation of the diamond burnishing process parameters, an experimental design with 55 experimental points is synthesized. A regression analysis and analysis of variance have been carried out. The influence of the factors on the friction coefficient is established using sections of the hyper-surface of the friction coefficient model with the hyper-planes.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.2
• /
• pp.15-23
• /
• 2019

Among service industries of knowledge based economic era, the roles of educational service field are becoming more important and standard of educational service makes a direct effect on economic development and social growth. Therefore, accurate measurement of service quality is the most important assignment and the measurement of the service quality remains difficult assignment. So, this researcher classified quality attributes applying weighted value and found potential satisfaction level(PSL) and potential customer demand improvement index(PCDI) for trainees participating in national manpower business so as to suggest measurement of service quality and easiness of use and then, calculated satisfaction position and opportunity cost by quality factor with Taguchi's loss fraction. And, improvable satisfaction level was measured, opportunity cost by degree of customer dissatisfaction was quantitatively measured, and a model that can indicate with economic factors was suggested. In addition, methodology of measuring quality cost that can be reduced by quality improvement and direction of strategic decision-making for deciding items to be improved preferentially were suggested with qualitative index that can indicate the degree of customers' dissatisfaction by loss.

• Korean Journal of Human Ecology
• /
• v.4 no.1
• /
• pp.63-74
• /
• 1995

Urben wage workers' education expenditure among different social classes from 1979 to 1993 has been compared. Eduction expenditure has increased much more than that of income resulting from income increase and government policy. Education expenditure gaps among social classes have showed to be an increasing trend although the ratio of education expense to the income has increased among low class families. Average income elasticity was 1.1 and this result showed that education expense was luxury good. Income elasticity of education expense among low class families have fluctuated more than any other classes resulting from construction business cycle and housing rent increase. Average Gini coefficient was 0.38 and turned out to be highest among 9 household expenditures, however it was in the trend of improvement from 81. But from 91 Gini Coefficient went up high again. Main reason for this increase was due to high social class families' eucation expenditure increase. Government's strong policies to enhance equality level of education opportunity and to support low class families are urged.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.87-94
• /
• 2020

This study aims to evaluate the effectiveness of sterilization in Vietnam. We estimate a simultaneous equation by using Two-Stage least squares (2SLS) regression analysis. The time-series data was collected for the first quarter of 2004 to the fourth quarter of 2018. In particular, the effectiveness of sterilization is considered in terms of dollarized economy, since making the transition from a centrally planned to a market economy system, the Vietnamese economy has remained in a state of dollarization. In addition, we also assess whether the global financial crisis had an impact on the sterilization effectiveness of the State Bank of Vietnam (SBV). On the basis of the estimated sterilization and offset coefficients, our results suggest that the State Bank of Vietnam (SBV) has not been able to fully neutralize the impact on the domestic money supply when intervening in the foreign exchange market, and the capital inflows respond strongly to changes in domestic monetary conditions. The results also show that the global financial crisis has changed the effectiveness of these sterilization policies. An analysis of this study's empirical findings provides the opportunity to derive some recommendations that may assist in increasing the effectiveness of the State Bank of Vietnam's sterilization policies in the process of accumulating international reserves.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.4
• /
• pp.243-251
• /
• 2009

Refrigerant mixtures provide an opportunity to adjust their properties to fit design criteria and a possibility to create new blends that can improve heat transfer characteristics. Therefore, mixture of $CO_2$ and propane is chosen which may be a promising refrigerant and has good environmental compatibility. This paper presents measured heat transfer coefficient data during evaporation process of $CO_2$/propane mixtures flowing upward in vertical smooth and. micro-fin tubes. Smooth and micro-fin tubes with outer diameters of 5 mm and length of 1.44in were selected as test tubes. The tests were conducted at mass fluxes of 212 to $656kg/m^{2}s$, inlet temperatures of -10 to $30^{\circ}C$, heat fluxes of 15 to $60\;kW/m^2$ and for several compositions (75/25, 50/50, 25/75 wt%). Among $CO_2$/propane refrigerant mixtures, the heat transfer characteristics are much better than that of any compositions when the composition is 75/25 (wt%).

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.6
• /
• pp.455-461
• /
• 2001

Domestic ice making companies make effort to obtain products and neglect to introduce low cost product improvements with energy savings. The work presented here is an implementation of ice making method to improve both energy efficiency and productivity. In this present investigation, several ice making cycles are proposed for higher efficiency in the system. COP(Coefficient of Performance), ice making time and electric energy consumption are evaluated and compared with the conventional system. Results shows that COP is improved with more efficient use of time for ice making and electric consumption. Therefore, this can offer an opportunity for more efficient use of energy and higher productivity in ice making.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.55-63
• /
• 2018

This study analyzed the applications of near real-time drought monitoring using satellite rainfall for the Korean Peninsula and un-gaged basins. We used AWS data of Yongdam-Dam, Hoengseong-Dam in Korea area, the meteorological station of Nakhon Rachasima, Pak chong for test-bed to evaluate the validation and the opportunity for un-gaged basins. In addition, we calculated EDI (Effective doought index) using the stations and co-located PERSIANN-CDR, TRMM (Tropical Rainfall Measurement Mission) TMPA (The TRMM Multisatellite Precipitation Analysis), GPM IMERG (the integrated Multi-satellitE Retrievals for GPM) rainfall data and compared the EDI-based station data with satellite data for applications of drought monitoring. The results showed that the correlation coefficient and the determination coefficient were 0.830 and 0.914 in Yongdam-dam, and 0.689 and 0.835 in Hoengseng-Dam respectively. Also, the correlation coefficient were 0.830, 0.914 from TRMM TMPA datasets and compasion with 0.660, 0.660 based on PERSIANN-CDR and TRMM data in nakhon and pakchong station. Our results were confirmed possibility of near real-time drought monitoring using EDI with daily satellite rainfall for un-gaged basins.