• Title/Summary/Keyword: operational safety

Search Result 964, Processing Time 0.028 seconds

A Study on Navigational Support Services for Improving Navigational Safety of Non-SOLAS Ships (비협약선박의 항해안전 향상을 위한 항해지원서비스에 관한 연구)

  • An, Kwang;Kim, Inchul;Kim, Chol-Seong
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.22 no.4
    • /
    • pp.305-310
    • /
    • 2016
  • This study identified necessary navigational support services to prevent accidents through an examination and a survey on the navigation and communication systems of non-SOLAS ships. The functional and operational requirements for the identified navigational support services were discussed accordingly. Among the navigational support services proposed are an Electronic Navigational Chart (ENC) service, a route planning service, an operation monitoring service, and collision prevention support services for ships in coastal areas. To facilitate the identified navigational support services, ship navigation system, shore supporting centre and maritime communication network were discussed as a digital infrastructure. The operational methode for the digital infrastructure were discussed in the service scenarios for ships carrying dangerous cargo, large ships over 200 meters in length and high speed passenger ships over 15 knots in speed. This study will facilitate the development of policies for the improvement of ship operation management in Korean coastal waters and will contribute to improving the navigational safety of non-SOLAS ships.

Effectiveness Analysis of Variable Speed Limit Systems(VSL) in Work Zones based on Meta-analysis (메타분석을 이용한 공사구간 가변속도제한시스템(VSL) 효과분석)

  • Jo, Young;Youn, Seok-min;Oh, Cheol
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.15 no.4
    • /
    • pp.91-103
    • /
    • 2016
  • The work zone traffic management is of keen interest because the unstable traffic stream in work zones leads to not only less productive traffic operational efficiency but also negative impacts on traffic safety. A promising method to address such issues is variable speed limit systems(VSLS). VSLS is expected to increase in throughput and to enhance safety by diminishing the crash potential. In addition, the usefulness of VSLS has been demonstrated by significant amount of existing literature. The objective of this study is to identify the effectiveness of VSLS based on a meta analysis technique. Throughput and travel speed were used as measures of effectiveness for VSLS in terms of the operational efficiency and safety respectively. Results showed that approximately 16.4% increase in throughput and 16.5% decrease in travel speed were obtainable by VSLS. The outcomes of this study would be useful in developing technologies and polices for better operation of VSLS.

RELIABILITY DATA UPDATE USING CONDITION MONITORING AND PROGNOSTICS IN PROBABILISTIC SAFETY ASSESSMENT

  • KIM, HYEONMIN;LEE, SANG-HWAN;PARK, JUN-SEOK;KIM, HYUNGDAE;CHANG, YOON-SUK;HEO, GYUNYOUNG
    • Nuclear Engineering and Technology
    • /
    • v.47 no.2
    • /
    • pp.204-211
    • /
    • 2015
  • Probabilistic safety assessment (PSA) has had a significant role in quantitative decision-making by finding design and operational vulnerabilities and evaluating cost-benefit in improving such weak points. In particular, it has been widely used as the core methodology for risk-informed applications (RIAs). Even though the nature of PSA seeks realistic results, there are still "conservative" aspects. One of the sources for the conservatism is the assumptions of safety analysis and the estimation of failure frequency. Surveillance, diagnosis, and prognosis (SDP), utilizing massive databases and information technology, is worth highlighting in terms of its capability for alleviating the conservatism in conventional PSA. This article provides enabling techniques to solidify a method to provide time- and condition-dependent risks by integrating a conventional PSA model with condition monitoring and prognostics techniques. We will discuss how to integrate the results with frequency of initiating events (IEs) and probability of basic events (BEs). Two illustrative examples will be introduced: (1) how the failure probability of a passive system can be evaluated under different plant conditions and (2) how the IE frequency for a steam generator tube rupture (SGTR) can be updated in terms of operating time. We expect that the proposed model can take a role of annunciator to show the variation of core damage frequency (CDF) depending on operational conditions.

Analysis and cause of occurrence of lining cracks on NATM tunnel based on the precise inspection for safety and diagnosis - Part I (정밀안전진단 결과를 활용한 NATM터널(무근)의 라이닝 균열 종류별 발생원인 및 분석 - Part I)

  • Choo, Jin-Ho;Park, Sung-Woo;Kim, Hyung-Tak;Jee, Kee-Hwan;Yoon, Tae-Gook
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.13 no.3
    • /
    • pp.199-214
    • /
    • 2011
  • A crack is the main cause to affect the integrity of tunnel lining as well as leakage, spalling, exposed rebar, corrosion, carbonation and so on. Since the 1980, NATM has prevailed on excavation method and geotechnical philosophy in tunnel. Although the pattern of cracks has been reported by several engineers' effort, it was only focused on longitudinal cracks of lining. Eleven operational NATM tunnels have been conducted with the precise inspection for safety and diagnosis by KISTEC (Korea Infrastructure Safety and Technology Incorporation). With those results, the crack patterns by the spatial distribution and appearance for each tunnel have been analyzed and the cause of occurrence for seven common types of cracks in NATM tunnels was classified. Additionally, the longitudinal crack on lining above duct slab was figured out by numerical simulation and field inspection. Each crack has been analyzed by CCD (Charge-Coupled Device) scanner image with 3D configuration. Each type of cracks is also explained with output of experimental and condition of construction. Defined cracks on NATM tunnels will be good example for periodical inspection and precise inspection for safety and diagnosis.

Evaluation of the Navigational Safety in Coastal Waterway using Fuzzy measures and Choquet Integral (퍼지측도 및 쇼케적분을 이용한 연안해역의 통항 안전성 평가에 관한 연구)

  • Keum, Jong-Soo;Yang, Won-Jae
    • Journal of Navigation and Port Research
    • /
    • v.28 no.5
    • /
    • pp.395-403
    • /
    • 2004
  • The prevention of marine accidents has been a major topic in marine society and various policies and countermeasures have been developed, applied to the industries. The coastal VTS and navigational aids are considered as one of the effective methods to promote marine safety but they need relatively huge amount of budgets to build Thus prior to establishing these coastal VTS and navigational aids, it should be evaluated the navigational safety level in the coastal waterways from the Environmental Stress. So far as human beings are concerned, there are many types of fuzziness in the evaluation of navigational safety level. In order to reflect these fuzziness on this evaluation, this paper introduces the fuzzy integral suggested by Choquet to represent the fuzziness in the evaluation process. This paper aims to develop the method for this evaluation from the viewpoint of mariner's operational stress using the fuzzy measure and Choquet integral. In this paper, Korean coastal area is divided into 8 sectors and evaluated the priority for the needs of coastal VTS and navigational aids.

Analysis on Emergency Power Supplies in Buildings and a Model for Safe Operation of the Emergency Power System (건축물의 비상전원 적용실태 및 자가발전설비의 안전 운전 모델에 관한 연구)

  • Lee, Won-Kang;Choi, Chung-Seog
    • Journal of the Korean Society of Safety
    • /
    • v.27 no.3
    • /
    • pp.49-56
    • /
    • 2012
  • The purpose of this paper is to present a model for operating an emergency power system(EPS) that can secure a sufficient power supply used in case of a fire by analyzing the status of power supplies for emergency and firefighting operations. Investigations on the one of the causes of the operational failure of firefighting systems show evidence of EPS. Generally, when power to a building is interrupted, EPS supplies the emergency load(excepted firefighting load) first. When a power outage and a fire occur simultaneously, the EPS must be able to supply both the emergency load and the firefighting load, especially the firefighting load to the end. However, in order to save construction costs, emergency power generators in apartment, commercial, and business buildings can satisfy only one of the required loads. In cases like this, when a power outage and a fire occur simultaneously, there is a danger of firefighting equipment not operating due to insufficient power supply from the emergency generator. Therefore, an EPS must have a reserved firefighting power that can supply both the firefighting and the emergency load. Such EPS, when faced with a danger of an overload, will shut down the supply to all or part of the emergency load, thus securing a continuous power supply to the firefighting equipment. The generator power system with reserved firefighting power (RFP) will also have an indicator to show that the selective control is being used. General power generation systems for emergency load and firefighting load were found to have a demand factor of 50-60% with a lump. However, when installing an EPS, the builders must choose the higher demand factor suggested according to the official approval demand factor of the building.

Evaluation of the Navigational Risk Level in Coastal Waterway using Fuzzy Logic (퍼지로직을 이용한 연안해역의 통항 위험성 평가)

  • Keum Jong-Soo;Jang Woon-Jae
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.12 no.1 s.24
    • /
    • pp.53-59
    • /
    • 2006
  • The prevention of marine accidents has been a major topic in marine society and various policies and countermeasures have been developed, applied to the industries. The coastal VTS and navigational aids are considered a, one of the effective methods to promote marine safety but they need relatively huge amount of budgets to build. Thus prior to establishing these coastal VTS and navigational aids, it should be evaluated the navigational risk level in the coastal waterways from the Environmental Stress. So far as human beings are concerned, there are many types of fuzziness in the evaluation of navigational safety level. In order to reflect these fuzziness on this evaluation, this paper introduces the fuzzy integral suggested by Choquet to represent the fuzziness in the evaluation process. This paper aims to develop the method for this evaluation from the viewpoint of mariner's operational stress using the fuzzy logic and Choquet integral. In this paper, Korean coastal area is divided into 8 sectors and evaluated the priority for the needs of coastal VTS and navigational aids.

  • PDF

Conceptual Design of Navigation Safety Module for S2 Service Operation of the Korean e-Navigation System

  • Yoo, Yun-Ja;Kim, Tae-Goun;Song, Chae-Uk;Hu, Shouhu;Moon, Serng-Bae
    • Journal of Navigation and Port Research
    • /
    • v.41 no.5
    • /
    • pp.277-286
    • /
    • 2017
  • IMO introduced e-Navigation concept to improve the efficiency of ship operation, port operation, and ship navigation technology. IMO proposed sixteen MSPs (Maritime Service Portfolio) applicable to the ships and onshore in case of e-Navigation implementation. In order to meet the demands of the international society, the system implementation work for the Korean e-Navigation has been specified. The Korean e-Navigation system has five service categories: the S2 service category, which is a ship anomaly monitoring service, is a service that classifies emergency levels according to the degree of abnormal condition when a ship has an abnormality in ship operation, and provides guidance for emergency situations. The navigation safety module is a sub-module of the S2 service that determines the emergency level in case of navigation equipment malfunctioning, engine or steering gear failure during navigation. It provides emergency response guidance based on emergency level to the abnormal ship. If an abnormal condition occurs during the ship operation, first, the ship shall determine the emergency level, according to the degree of abnormality of the ship. Second, an emergency response guidance is generated based on the determined emergency level, and the guidance is transmitted to the ship, which helps the navigators prevent accidents and not to spread. In this study, the operational concept for the implementation of the Korean e-Navigation system is designed and the concept is focused on the navigation safety module of S2 service.

Investigation of seismic safety of a masonry minaret using its dynamic characteristics

  • Basaran, Hakan;Demir, Ali;Ercan, Emre;Nohutcu, Halil;Hokelekli, Emin;Kozanoglu, Celalettin
    • Earthquakes and Structures
    • /
    • v.10 no.3
    • /
    • pp.523-538
    • /
    • 2016
  • Besides their spiritual significance, minarets are humanity's cultural heritage to the future generations due to their historical and architectural attraction. Currently, many historical masonry minarets are damaged and destroyed due to several reasons such as earthquakes and wind. Therefore, safety of these religiously significant buildings needs to be thoroughly investigated. The utmost care must be taken into account while investigating these structures. Our study investigated earthquake behavior of historical masonry minaret of Haci Mahmut Mosque. Destructive and non-destructive tests were carried out to determine earthquake safety of this structure. Brick-stone masonry material properties of structure were determined by accomplishing ultrasonic wave velocity, Schmidt Hammer, uniaxial compression (UAC) and indirect tension (Brazilian) tests. Determined material properties were used in the finite element analysis of the structure. To validate the numerical analysis, Operational Modal Analysis was applied to the structure and dynamic characteristics of the structure were determined. To this end, accelerometers were placed on the structure and vibrations due to environmental effects were followed. Finite element model of the minaret was updated using dynamic characteristics of the structure and the realistic numerical model of the structure was obtained. This numerical model was solved by using earthquake records of Turkey with time history analysis (THA) and the realistic earthquake behavior of the structure was introduced.

A Study on the Improvement of Metal Detector Equipment Standards by Aviation Security Level (항공보안 등급별 금속탐지장비 기준 개선 방안 연구)

  • Ryu, Hanseul;Park, Hanjun;Kim, Yosik;Choi, YongHun
    • Journal of Aerospace System Engineering
    • /
    • v.15 no.1
    • /
    • pp.95-101
    • /
    • 2021
  • The detection sensitivity of a Walk Through Metal Detector (WTMD) currently being developed and operated in Korea differs from one manufacturer to another, making it difficult for them to be used based on Aviation Security level. In addition, the FAA 3-GUN Test approved by the domestic aviation authority for aviation security supervision is a single test object. There is no Operational Test Piece (OTP) consisting of multiple test objects for the operation of aviation security for a WTMD. This paper, the detection sensitivity of a WTMD applied by a commercial OTP was measured and detection sensitivity standards for a WTMD were developed based on results of measurement. Furthermore, institutional plans to maintain the same detection sensitivity for domestic aviation security were made through suggestions for Korean standards OTP development methods, taking characteristics of the aviation field into consideration.