• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2093-2096
• /
• 2003

Trusted operating systems (OS) provide the basic security mechanisms and services that allow a computer system to protect, distinguish, and separate classified data. Trusted operating systems have been developed since the early 1980s and began to receive National Security Agency (NSA) evaluation in 1984. The researches about trusted OS are proceeding over the world, and new product type using the loadable security kernel module (LSKM) or dynamic link library (DLL) is being developed. This paper proposes a special type of product using LSKM and specific conditions for operational environment should be assumed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.340-346
• /
• 2000

The vibration induced by high speed train running on rail is dealt with as an environmental problem. The train induced vibration is characterized by moving loads of specific frequency contents and soil conditions. In fact various sources are involved the wheal distance, number of cars, speed of operation, drift of rails, structural form vibration, etc. In this paper the characteristics of transferring vibration induced by the operational high-speed train is discussed. And the field measurements was conducted at region from Chungnam Yungi So-jung-myan to Chungbuk Chungwon hyun-do-myun. In the future is would be proposed the fundamental data for establishment of the countermeasure for vibrational reduction of high speed train using the results of the field measurements and quantitative prediction of the vibration level

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.11
• /
• pp.927-932
• /
• 2001

When people write a character with a pen stably, proper compliance planning is necessary. In this paper, after investigating the property of character writing task, we propose a fundamental grasp model for character writing and also analyze compliance characteristics for effective character writing using multi-fingered hands. For this, the general stiffness relation of multi-fingered hand is firstly described. Next, we investigate the grasp configurations for grasping a pen and then, we analyze the conditions of the specified stiffness matrix in the operational space to successfully and more effectively achieve the given character writing task. Through the analysis, an effective grasp modeling for successful character writing is shown. And also, we conclude that the operational compliance characteristics should be properly planned for character writing, stably and precisely.

• Korean System Dynamics Review
• /
• v.11 no.2
• /
• pp.119-138
• /
• 2010

This study introduces the system dynamics model that simulate total operational availability when 10 equipments made of 3 major components are serviced under the constrains of the maintenance capacity level and the number of spare parts. This simulation is designed on the base of reliability engineering concept so failures of components happens with the rule of engineering factors like the mean time between failure(MTBF) of component and the next failure time of one component is effected by the conditions of other components. We analysed availability of 10 equipments under 121 constrains and executed multiple regression analysis with the simulation result. The analysis provide the managerial insight in the service fields with operation many equipments.

• Tunnel and Underground Space
• /
• v.6 no.2
• /
• pp.175-183
• /
• 1996

Linear cutting tests on granite were conducted to evaluated the cutting performance of abrasive water jet(AWJ) using several types of abrasives. The abrasives used in the tests were grarnet, alumimum oxide, and silicon carbide. And one type of granite which is comercially known as "KeuchangSuk" was used as workpiece throughout the tests. The results from the tests were described in terms of cutting depth and abrasive productivity. Authors tried to confirm the effects of the operational parameters of abrasive mass flow rate, water pressure, and traverse speed of nozzle on cutting depth and presented almost all the data obtained in the tests. Abrasive productivity can be defined as the area of kerf wall cut by unit weight of abrasive and is an important factor to evaluated the cutting ability of abrasive and assess the cost effectiveness of an AWJ system. In the tests the maximum abrasive productivities of garnet, alumina, and silicon carbide were about 0.21, 0.24, and 0.20 $\textrm{cm}^2$ respectively under similar operational conditions.onditions.

• Journal of computational fluids engineering
• /
• v.12 no.3
• /
• pp.1-7
• /
• 2007

In the present study, the wind pressure transients on platform screen door in island platform caused by a passing train are investigated numerically. The transient compressible 3-D full Navier-Stokes solution is obtained with actual operational condition of subway train and the moving mesh technique adopted for the train movement. To achieve more accurate results, detailed shape of train is included in a computational domain and the entrance and exit tunnel of platform are also modeled. Numerical analyses are conducted on three operational conditions of different velocity variation.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.897-902
• /
• 2007

The turnover-type sluice gate is typically actuated by the open circuit hydrauic system since the single-rod cylinder is used rather than the double-rod cylinder. However, here the closed circuit hydrauic system is applied for the operation of turnover-type sluice gate for the purpose of convenient operation. The closed circuit hydraulic system of turnover-type sluice gate is composed of a bi-directional pump, single-rod cylinders, pilot operated check valves, check valves and a counter balance valve. The usefulness of the closed circuit hydraulic system is verified for the several operational conditions by the computer simulations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.769-772
• /
• 1995

Most turbo machines, which operate at high speeds, such as gas turbines, jet engines, pumps, and compressors are prone to perrturbing vibrations. The best vibration control method for rotors is to eliminate destabilizing factors. Careful balancing application of "more stable" oil-lubricated bearing, such as tilting pad bearings or use of anti-swirl devices in seals, are examplse of passive vibration control methods. the use of magnetic bearing is an active control method. An obvious advantage of active control is that it provides damping (or modifies system stiffness or other parameters) only when there is a need for that, i.e., in emergency states, while not affecting the rotor normal operational conditions. Moreover, active control methods provide exact position control through on-line control. In this study, a magnetic actuator, digital contrliier using DSP, and bipolar operational power supply/amplifiers were developed to show the effectiveness of reducing robot vibration. Also the curve fitting procedure to obtain the transfer function of frequency dependent component was developed. Results presented in this dissertation will provide a well-defined technical parameters in designing magnetic damper system.er system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.2
• /
• pp.81-86
• /
• 2014

In this paper, we states the verification and validation methodology for the modular system of A-SMGCS which defined in the ICAO Manual on Advanced Surface Movement Guidance and Control Systems. Such systems aim to maintain the declared surface movement rate under all weather conditions while maintaining the required level of safety. With the complete concept of an A-SMGCS, air traffic controllers, vehicle drivers, flight crews, and are assisted with surface operations in terms of surveillance, control, routing/planning and guidance tasks. A-SMGCS verification and validation for the development of Real Time Simulation, shadow mode trials, operational trials are conducted through three methods. In this study, the characteristics and the need for such a verification method was examined.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.1
• /
• pp.5-11
• /
• 2012

This paper discusses the evaluation of the safety impact of the Adaptive Cruise Control (ACC) system in Korea. To evaluate the safety impact, this paper suggests an analysis method by using the test scenario and field operational test data. The test scenario is composed to represent the main component factor of the ACC system and ACC related accident situation such as rear-end collision, lane-change, and road-curvature, etc. Also, from the field operation test data, the system's potential to increase the safety can be measured ideally. Besides, field operational testdata was used to revise the expected safety impact value as Korean road conditions. By using the proposed evaluation method, enhanced safety impact of the ACC system can be estimated scientifically.