• Journal of Internet of Things and Convergence
• /
• v.1 no.1
• /
• pp.33-38
• /
• 2015

Hardware are developed in various architecture. It is necessary to verifying value of variables in modules generated in each clock cycles for timing simulation. In this paper, a test vector generator in software type generates test vectors for timing simulation of 224-bit ECDSA hardware modules in developing stage. It provides test vectors with GUI format and text file format.

• Proceedings of the KIEE Conference
• /
• 2006.07e
• /
• pp.51-52
• /
• 2006

Our company(KOWACO) has periodically performed off-line diagnostic test for 14 hydro generators (rated 11 kV over) for 15 years. In this paper, we summarized results of dissipation factor tip-up test and partial discharge test about these generators. Among these, we chose two generators and performed insulation reinforcement (cleaning and varnish painting). We compared change of insulation condition for the stator winding based upon off-line diagnostic test result before and after repair. Test result shows that insulation condition was improved after insulation reinforcement. This insulation reinforcement has a function to reduce cause of deterioration, so we can know that it extends lifetime of generator and it is a very important factor for stable operation of facilities.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.747-750
• /
• 2004

After launching, spacecraft is exposed to extreme environments. So spacecraft should be tested after design/manufacture to verify whether components can be operated functionally. Acceleration transferred from launch vehicle to spacecraft produces quasi-static load, sine vibration and random vibration. Random vibration is also induced by acoustic vibrations transferred by surface of spacecraft. And shock vibration is produced when spacecraft is separated from launch vehicle. To verify operation of spacecraft under these launch environments, separation shock test, sine vibration test, acoustic vibration test and random vibration test should be performed. This paper describes these launch environment test requirements.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.2
• /
• pp.1-7
• /
• 2018

The research and development stage can improve the goal level of the project through systematic operation and management of systems engineering. The test evaluation tasks in the R&D process have a lot of connections with the system engineering in terms of requirement management, and the methodology for deriving the requirements when establishing the test evaluation items has been consistently required. In this paper, we propose the process of effectively establishing and using QFD (Quality Function Deployment), a tool to manage customer requirement, and drawing up HOQ (House of Quality) in the search and exploratory development stage of the self - propelled mortar project.

• Journal of Aerospace System Engineering
• /
• v.14 no.6
• /
• pp.85-90
• /
• 2020

The infrared signature that is associated with an aircraft is mainly caused by heat released from the engine and the exhaust plume. In this study, a test-system was designed to observe the overall infrared signature characteristics of a turbofan engine during operation under ground running conditions and the infrared reduction features that result from different exhaust nozzle configurations. A test stand was designed for the 1400 lbf class turbofan engine that included a bell-mouth type intake, fuel supply system, a measurement system, and a data acquisition/control system. The design and verification of the test system were conducted so that the basic nozzle and various 2D nozzles could be applied to study the infrared signature produced by a turbofan engine exhaust.

• The KIPS Transactions:PartB
• /
• v.11B no.1
• /
• pp.63-70
• /
• 2004

Port operation is largely divided into gate operation, yard operation and berth operation. Operation strategy and optimal resource allocation for three parts are important in the productivity of the port operation.. Especially the resource allocation planning in berth operation needs optimization, because it is directly connected with the processing time in shipping. Berth planning is not independent on recourse allocation but interrelated with yard stacking area allocation. Therefore, we design the optimized module of berth planning and give priority to interrelationship with yard space allocation, while existing studies design independent resource allocation in berth planning. We suggest constraints by mathematical method, and they are related to yard stacking area allocation with existing constraints. Then we look for solutions, use tabu search to optimize them, and design optimized the berth planning module. In the performance test of optimized module design of berth planning, we find that the berth planning with yard stacking area allocation takes less processing time than without yard stacking area allocation.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.3
• /
• pp.495-502
• /
• 2010

Objetives : It tries to grasp whether the knowledge and attitude about the oral health of the school dental clinic operation school and non-operation school with 6 grade children in Daejeon Metropolitan City and the school dental clinic operation reaches any influence to the oral health of the child or not. Methods : The self-administered survey was performed for the school dental clinic operation group (201 people) and non-operation group (207 people) child 408 people from October 5th in 2009 until October 31st. By using the spss statistical program(VER 15.0), the statistical analysis performed the chi-square verification and t-test. Results : 1. The knowledge degree about the oral health according to the oral health education is the health education experienced group $22.34{\pm}3.36$ and non-experienced group $20.32{\pm}3.49$ (p=0.000), and the attitude showed the health education experienced group $15.06{\pm}2.99$ and non-experienced group $13.30{\pm}3.20$, oral health education experienced group significantly higher in the knowledge and the attitude, there was statistically significant difference(p=0.000). 2. The knowledge degree about the oral health according to the school dental clinic operation is school dental clinic group $22.84{\pm}2.92$ and non-school dental clinic group $20.83{\pm}3.73$ (p=0.000), and attitude showed high the school dental clinic group as the school dental clinic group $15.48{\pm}2.75$ and non-school dental clinic group $13.76{\pm}3.26$, there was statistically significant difference (p=0.000). Conclusions : The knowledge degree and attitude about the oral health showed high in oral health education experience group and the school dental clinic group when looking at the result described in the above. It thinks that the school dental clinic group has to be expanded for the oral health promotion of the children.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.17-26
• /
• 2013

Objective: The aim of this study is ergonomic analysis of tele-operation tasks using modified remote handling devices dedicated to the cell of PRIDE(PyRoprocess Integrated inactive DEmonstration facility) in KAERI(Korea Atomic Energy Research Institute). Background: Tele-operation manipulators of the PRIDE are applied to perform the remote handling and management of pyroprocessing facilities. Generally, these kinds of systems are composed of master-slave system and its peripherals installed along a wall or ceiling of the cell, and the manipulators transmit the user's own motion to grippers directly. However, a user convenience and intuitiveness while operating the manipulators have not been fully considered in research fields. Method: This study tries to analyze the ergonomic performance of remote handling manipulators in the developed cell facility. It was included that the analysis of operator's capability for his/her own motion range of upper arm while manipulating the MSM, considerations of its manipulation margin and related tool modifications to improve the remote handling performance. Conclusion: The test results of several remote handling tasks performed in PRIDE are represented, and adequate operation strategies for the tele-operation system of hot-cell type facilities are proposed. Application: The knowledge represented in this study can be utilized to improve a tele-operation system operated in a large-scale hot-cell system.

• Imaging Science in Dentistry
• /
• v.32 no.4
• /
• pp.201-206
• /
• 2002

Purpose : To evaluate the radiographic change of operation sites after orthognathic surgery using the digital image processing and fractal analysis. Materials and Methods : A series of panoramic radiographs of thirty-five randomly selected patients who had undergone mandibular orthognathic surgery (bilateral sagittal split ramus osteotomy) without clinical complication for osseous healing, were taken. The panoramic radiographs of each selected patient were taken at pre-operation (stage 0), 1 or 2 days after operation (stage 1), 1 month after operation (stage 2), 6 months after operation (stage 3), and 12 months after operation (stage 4). The radiographs were digitized at 600 dpi, 8 bit, and 256 gray levels. The region of interest, centered on the bony gap area of the operation site, was selected and the fractal dimension was calculated by using the tile-counting method. The mean values and standard deviations of fractal dimension for each stage were calculated and the differences among stage 0, 1, 2, 3, and 4 were evaluated through repeated measures of the ANOVA and paired t-test. Results : The mean values and standard deviations of the fractal dimensions obtained from stage 0, 1, 2, 3, and 4 were 1.658±0.048, 1.580±0.050, 1.607±0.046, 1.624±0.049, and 1.641 ±0.061, respectively. The fractal dimensions from stage 1 to stage 4 were shown to have a tendency to increase (p < 0.05). Conclusion: The tendency of the fractal dimesion to increase relative to healing time may be a useful means of evaluating post-operative bony healing of the osteotomy site.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.280-288
• /
• 2009

In this paper, we developed new time information recording module of VSI (VLBI Standard Interface) format by analyzing the Mark5B recorder control and operation software with 1Gbps speed, which is able to record the weak signal of space radio source, through the Korean VLBI Network (KVN). The control and operation software of high-speed recorder consists of 2 kinds of software, which is that it can operate RAID control board by controlling large capacity HDD drive and the network control and operation. Especially, core software in high-speed recorder is able to output the results after performing and analyzing the input command. Through the analysis of control and operation software, new time information recording module, which is needed to process the observed data for correlation, is developed. New developed time information recording module can record the time information together after checking the interrupt of 1PPS(Pulse Per Second) input signal when the observed data will be recorded. To verify the normal operation of the developed time information recording module, we performed the real observation test and confirmed the effectiveness of developed software through analyzing the recorded observation data.