• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.401-404
• /
• 2006

This study is the part of the investigation of the state of the art in ultra high flowing concrete (UHFC), applied in practical field construction, in order to develop the technology for improving workability. This paper includes a brief introduction of water content variance properties in UHFC before and after the pumping operation. Test showed that water content in all parameters decreased after the pumping. This is due to the increase of an absorption ratio of coarse aggregate by the pressure of the pumping operation. thus decreasing the water content. Therefore it should be considered to find out the possibility, which can improve the workability, suffering from over viscosity by the lower water content, in field construction.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.3
• /
• pp.1-7
• /
• 2023

As the capacity of renewable power generation facilities rapidly increases, the variability of electric power system and gas turbine power generation is also increasing. Therefore, problems may occur that require urgent repair while the gas turbine rotor is stopped. When the gas turbine rotor turning is stopped and then restarted, if the turning period is not appropriate, severe vibration may occur due to rotor bending. As a result of the experiment, it was confirmed that normal operation is possible when the gap data measured at the start of rotor turning after maintenance work is similar to the existing value. And the vibration value at the start of rotor turning was lower as the rotor temperature was lower or the stop period was shorter.

• Journal of Advanced Engineering and Technology
• /
• v.7 no.3
• /
• pp.131-135
• /
• 2014

In this paper was proposed a flux offset-type fault current limiter as means of reducing fault currents. To secure the operation reliability of a flux offset-type fault current limiter, constructed a simulation system to analyze its operation characteristics by generating a double line-to-line fault. According to the test results, the system performed stably without any impedance. However, when an accident occurred, the flux-offset of magnetic was not occurred. Because of this, any impedance occurred at circuit. It was confirmed that the impedance was low and fast to limit the fault current. At this time, the fault current limited rate was about 95%.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.751-756
• /
• 2023

In this study, We investigated a fire case and performed an experiment to prevent fire from sparks that is generated during grinding operation. Before conduct the test, confirmed that the generating mechanism of fire-flakes in working grinder and the fire experiment was conducted using commonly tools, flammable materials in industrial field. in result, It could be measured scattering distance, temperature, ignition possibility by type of combustible materials. Based on the results of this study, We are expected to be used as basic data for fire prevention in grinding Industry.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_2
• /
• pp.1009-1017
• /
• 2024

In this study, technology development was promoted to enable the convergence of augmented reality technology and actual drone operation technology, and its feasibility was confirmed through implementation and performance evaluation. In addition, it is believed that the AR-based drone simulator can contribute to improving drone operation capabilities by maximizing educational effectiveness and providing a realistic training environment. Based on the results of this study, we expect to improve the quality of vocational education related to drones and achieve high educational effectiveness, and it is believed that we will be able to suggest various directions in education using augmented reality.

• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.210-217
• /
• 2021

In the case of an agile-based project, it was inadequate to perform a comprehensive inspection and evaluation on the establishment and operation of an information system by performing audit only with the audit and inspection elements provided by the existing information system audit and inspection system. In particular, in the case of the test activity area, it was necessary to improve the test activity audit check items to comprehensively check the agile-based development process by applying the existing audit system. To this end, a test activity improvement check model of the agile methodology audit model was presented by applying the repetition concept, a characteristic of the agile methodology. In order to empirically verify the model of this study, a survey was conducted for auditors and designers/developers who have experience in performing agile-based projects and auditing information systems. As a result of the questionnaire on the integrated test and system test in the test stage, more than 70% of the respondents were found to be suitable. More than 80% of the respondents judged that it was appropriate as a result of the questionnaire on "improvement and regression test progress according to integrated test and system test results" and "integrated test and functional actions of components and subsystems".

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1695-1700
• /
• 2011

In this paper, we introduce the network infrastructure in an advanced emu test line in Deabul. New technology has been applied to advanced EMU(DMU, integrated broadcasting system, black box and etc). In order to efficient and safely test of new developed train, failure, operation, status of test line and weather information should be monitored in real time. We has implemented a wireless and optical network infrastructure for reliability and scalability. The wireless communication capability between a car and ground is 20Mbps and back-hole network has 50Mbps of the communication performance. The network between test tracks and control office was established in the optical network. That can improve communication reliability.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.11 s.188
• /
• pp.50-57
• /
• 2006

The water leak in water-cooled generator stator windings can generate the serious accidents such as insulation breakdown and it brings a generator to the unexpected sudden outage. Accordingly, it is important to diagnose the water absorption of them for the effective operation of power plant. Especially, the capacitance value which is measured for diagnosis is very small so the special diagnosis methods like stochastic theory are needed. KEPRI developed the water absorption test equipment and diagnosis technology for them. The developed diagnosis technology is applied to the real system and the results of water absorption test for stator windings are agreed to them of water leak test.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.160-163
• /
• 2003

This paper represent a test method for the reliability assessment on the indoor vacuum circuit breakers used in the distribution system by an accelerated life test. In order to guarantee the lifetime in service of the vacuum circuit breaker, additional test methods are suggested. Multiple closing-opening operation test under no load condition as a mechanical endurance test and a check of the quality in the vacuum interrupter are adopted to assure the long-term reliability of the vacuum circuit breaker.

• Journal of the Korean Society of Systems Engineering
• /
• v.10 no.1
• /
• pp.73-80
• /
• 2014

Designing test case flows for water crossing operation of a wheeled vehicle is a new attempt for which very limited experiences exist. In this paper, a Function Flow Block Diagram(FFBD) and a Classification Tree Method(CTM) were combined to see if this method is viable to generate the test case flows at the functional analysis stage. It was found that this method can be practically used for the very complicated test case generation.