• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.298-308
• /
• 2020

This study was designed to verify reliability and feasibility by analyzing elderly drivers' ability test tools for older drivers aged 65 or older, which were improved in 2018 and are currently being conducted by the Korea Highway Traffic Authority. Only those aged 65 or older who voluntarily applied to the elderly driving ability evaluation system implemented by the Seoul branch of the Korea Highway Traffic Authority. The research was conducted for about 50 days until Aug. 31, 2018, starting with the registration and inspection of the first study subjects. The analysis performed a correlation analysis with existing tools and cognitive testing tools (MMSE_K) to determine their feasibility and reliability as an improved tool in 2018. As a result, the first, the speed distance, time-space memory, and dispersionism of each sub-component of the old version showed statistically significant static correlation with the sub-factor of the current version. Persistence, on the other hand, was not statistically significant to the current version. The limitations of this study were as follows. Most of the people in the study were highly educated and residents in the metropolitan area. Therefore, it is likely that the results of MSE_K, which checks cognitive and judgment skills, have been upgraded. Also, cognitive tools that are measured by computers are likely to have real measurement errors for generations who are not familiar with computers. Therefore, it is expected that improvement and development of tools for improving the limit points at the site and assessing actual operation capability will be required.

• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.279-285
• /
• 2016

With the development of nanotechnology, the amount of nanomaterials increases and the problems of environment and the toxic property associated with it have become a social problem. But regulations and laws of nanomaterials have not yet been established. The purpose of this study is to utilize as the database of safety guidelines for research activities' workers associated with nanomaterials to conduct a behavior evaluation of aluminium oxide, which is most widely used in thirteen kinds of WPMN manufactured nanomaterials in the country. The experiment proceeds in the chamber reduced to 1/6 size of the actual laboratory, the test method was performed in NIOSH 0500. As the results of the study, the mass concentration was in inverse proportion to the particle size of the nanomaterials. And the mass concentration during the operation of ventilation equipment was reduced to about 1/8 times. In the future, it can be utilized as the database of safety guidelines for research activities' workers associated with nanomaterials. However, in order to increase the reliability of the study, the experiment of the mass concentration by particle size and Condensation Particle Counters will be needed additionally.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.289-298
• /
• 2014

Recently, the traditional paradigm in railroad technology is changing as more efficient and cost-effective electric vehicle (EV) technologies have emerged. The original concept of PRT (Personal Rapid Transit) proposed in the past has come to be regarded as unrealistic, but its feasibility is improving through the utilization of an EV platform. In particular, battery-powered vehicles pose difficult technical challenges in attempts to achieve reliable and efficient operation. However, based on the inductive power transfer (IPT) technology, the fast charging of supercapacitors with high energy density can contribute to overcoming this technical challenge and promote the transition to electric-powered ground transportation by improving the appearance of cities. This study discusses the development process of a power supply system for PRT, including concept design, numerical analysis, and device manufacturing, along with performance predictions and evaluations. In terms of results, the system was found to meet the performance requirements for power supply modules on a test-bed.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.85-94
• /
• 1976

Six cases of gangreous mastitis of goats infected spontaneously were observed clinically and pathologically in Daegu and Daejeon district. and with strain isolated purely from the infected goats, the artificial infection to the animal was examined, the sensitivity of strain to the antibiotics was tested and clinical treatment was carried out. The results obtained are summarized as follows: 1. In the six cases approximately same clinical findings were observed as the previously published literatures on gangrenous mastitis of cattle, sheep and goats. 2. The micrococcus pyogenes var aureus was highly virulent strain which was the causative organism for the gangrenous mastitis by inoculating in the udder. 3. The gangrenous mastis was probably occured by the formation of thrombosis in veins of udder. 4. In the sensitivity test, the micrococcus pyogenes var aureus resited for penicillin in 2 cases among the 6 strains, but sensitived for streptomycin, chloromycin, oxyteracycline, erythromycin, achromycin, neomycin and kanamycin in other 4 and in all case. 5. The treatment for gangrenous mastitis may be extirpated the gangrenous region surgically in the case of unilaterally or locally affected, treated by muscle injection or teat-operation in the case of severely or diffusely affected and infused antibiotics up to teat canal or treated by mammary tissue injection in the case of slightly affected.

• Journal of Veterinary Clinics
• /
• v.28 no.3
• /
• pp.310-313
• /
• 2011

A 6-year-old female Shih-tzu dog was referred with left elbow joint mass associated with weight bearing lameness. Ultrasonography demonstrated an encapsulated hyperechoic mass at the left elbow joint. Radiography was performed on elbow joint, chest, and abdomen, but there was no evidence of metastasis. Clinicopathologic examination revealed the existence of neoplastic cells with anisocytosis, pleomorphism and increased nuclear-cytoplasmic ratio. The left forelimb was amputated for cure. Histopathological examination diagnosed the mass as a malignant peripheral nerve sheath tumor. During the 4 weeks follow-up, the patient showed full remission and adopted to walk with remaining three legs. Thereafter, the tumor recurred after 5 months of first surgery at the operation site and other two cutaneuos regions. Cytology test revealed the mesenchymal originated tumor cells with malignancy. These tumors were surgically removed and histopathological examination of the resected tissue revealed the recurrence of primary tumor and metastasis. Metronomic therapy with cyclophophamide (10 mg/$m^2$, PO, sid) and piroxicam (0.3 mg/kg, PO, sid) had been adopted for 5 months. At 26 months of follow up after the first surgery, the dog alive with satisfactory quality of life. Aggressive surgical resection with metronomic chemotherapy should be the most effective treatment for malignant peripheral nerve sheath tumor.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.17-22
• /
• 1999

The effect of microwave irradiation on wood bending was investigated in this study. The specimens irradiated with microwave were bent around a form by using pedestal-steel and clamps. The specimens, korea red pine (Pinus densiflora), for this test were water-soaked for 78 hours. Saturated specimens were boiled in water for an hour. The size of specimens was 350mm(L) by 20mm(R) by 10mm(T). These specimens were heated by microwave of 2,450MHz. The most suitable time for microwave irradiation seems to range from 60 to 90 seconds. Wood moisture content decreased remarkably with the increase of irradiation time. When a softened wood piece is bent, its convex side was stretched while the concave side was compressed. It can be compressed considerably, but stretched very little. Therefore the failure will be governed by the tensile breaking strain and occur mainly on the convex face. So we obtained results from three different bending process methods as follows : 1) When bending with a pedestal-steel, convex face had not tensile breakings, but concave face had compression fails. 2) When bending with a clamp, bending time increased more than pedestal-steel and occurred tensile breaking. 3) Bending with a pedestal-steel and a clamp was found to be the most excellent operation method in this study.

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.312-320
• /
• 2020

Various LIDs with natural water circulation function are applied to reduce urban environmental problems and environmental impact of development projects. However, excessive Infiltration and evaporation of LID facilities dry the LID internal soil, thus reducing plant and microbial activity and reducing environmental re duction ability. The purpose of this study was to develop a real-time measurement system with complex sensors to derive the management plan of LID facilities. The test of measurable sensors and Internet of Things (IoT) application was conducted in artificial wetlands shaped in acrylic boxes. The applied sensors were intended to be built at a low cost considering the distributed LID and were based on Arduino and Raspberry Pi, which are relatively inexpensive and commercialized. In addition, the goal was to develop complex sensor measurements to analyze the current state o f LID facilities and the effects of maintenance and abnormal weather conditions. Sensors are required to measure wind direction, wind speed, rainfall, carbon dioxide, Micro-dust, temperature and humidity, acidity, and location information in real time. Data collection devices, storage server programs, and operation programs for PC and mobile devices were developed to collect, transmit and check the results of measured data from applied sensors. The measurements obtained through each sensor are passed through the Wifi module to the management server and stored on the database server in real time. Analysis of the four-month measurement result values conducted in this study confirmed the stability and applicability of ICT technology application to LID facilities. Real-time measured values are found to be able to utilize big data to evaluate the functions of LID facilities and derive maintenance measures.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.65-70
• /
• 2010

The distillation rate on LiCl-KCl eutectic salt under different vacuums from 0.5-50 mmHg was first investigated by using both a non-isothermal and a isothermal thermogravimetric (TG) analysis. Based on the non-isothermal TG data, distillation rate equations as a function of the temperature could be derived. Calculated flux by these model flux equations was in agreement with the distillation rate obtained from isothermal TG analysis. A distillation rate of $10^{-4}-10^{-5}$ mole $cm^{-2}sec^{-1}$ is obtainable at temperatures less than 1300K and vacuums of 0.5-50 mmHg. About a 99% salt distillation efficiency was obtained after an hour at a temperature above 1150 K under 50 mmHg in a small scale distillation test system. An increase in the vaporizing surface area is relatively effective for removing residual salt in the remaining particles, when compared to that for the vaporizing time. Over 99.95% of total distillation efficiency was obtained for a 1-h distillation operation by increasing the inner surface area from $4.52cm^2$ to $12.56cm^2$.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.1
• /
• pp.45-55
• /
• 2017

Climate change causes changes in rainfall patterns, temperature and drought frequency. Climate change impact influences on water management and crop production. It is critical issue in agricultural industry. Rice is a staple cereal crop in South Korea and Korea uses a ponding system for its paddy fields which requires a significant amount of water. In addition, water supply has inter-relationship with crop production which indicates water productivity. Therefore, it is important to assess overall impacts of climate change on water resource and crop production. A water footprint concept is an indicator which shows relationship between water use and crop yield. In addition, it generally composed of three components depending on water resources: green, blue, grey water. This study analyzed the change trend of water footprint of paddy rice under the climate change. The downscaled climate data from HadGEM3-RA based on RCP 8.5 scenario was applied as future periods (2020s, 2050s, 2080s), and historical climate data was set to base line (1990s). Depending on agro-climatic zones, Suwon and Jeonju were selected for study area. A yield of paddy rice was simulated by using FAO-AquaCrop 5.0, which is a water-driven crop model. Model was calibrated by adjusting parameters and was validated by Mann-Whitney U test statistically. The means of water footprint were projected increase by 55 % (2020s), 51 % (2050s) and 48 % (2080s), respectively, from the baseline value of $767m^2/ton$ in Suwon. In case of Jeonju, total water footprint was projected to increase by 46 % (2020s), 45 % (2050s), 12 % (2080s), respectively, from the baseline value of $765m^2/ton$. The results are expected to be useful for paddy water management and operation of water supply system and apply in establishing long-term policies for agricultural water resources.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1046-1054
• /
• 2006

The raw water DOC contained 39.3% of hydrophilics, 42.9% of hydriophobic, and 17.8% of transphilic. The hydrophobic fraction in this raw water was mostly fulvic acid. Fulvic acid comprised of 62% and the rest was humic acid(38%). There was more carboxylic acid functional group(64%) than phenolic group(36%). HPI-N and HPI-C comprised of 17% and 22% in the hydrophilic portion, respectively. The fouling mechanisms on the membrane surface and into its porous structure were analyzed in terms of several kinetic models. In order to analyze the fouling kinetics, the various kinetic models described in this paper were used to fit the experimental results. The kinetic models and kinetic constants obtained for each operation condition. The permeate flux was rapidly declined by simultaneous pore blocking and cake formation. Also, the permeate flux declined with decreasing internal pore size resulted from organic deposition into the membrane pore. The results of the membrane fouling test using UF membrane according to NOM fractions. HPI-N caused more fouling than HPI-C. Humic acid caused more fouling than fulvic acid probably due to higher adsorption capacity. Since humic acid has higher adsorption capacity than fulvic acid, it would be more adsorbed onto the membrane pores.