• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.3
• /
• pp.293-299
• /
• 2008

Bite force is created by the force of adjacent teeth accompanied with tension of masticatory muscle. The bite force value is greater in male than in female and ha maximum value at first molar. Masseter muscle is associated with bite force and during muscle contraction the electric signal is expressed in EMG form. The aim of the study is to assess recovery time for masseter muscle activity and according to each part of bite force after open reduction with internal fixation when mandibular angle fracture and subcondyle fracture occurred. And to determine the appropriate period for mandibular fracture patients to have normal masticatory activity. 30 patients with normal bite condition was selected for control group and from April, 2007 to September, 2007, 20 patients who visited our department of oral and maxillofacial surgery of Dankook University, were selected for the study and were diagnosed as mandibular angle fracture and subcondyle fracture. For control group, the bite force for incisors, canine, premolars and molars and activity of the masseter muscle was measured and compared for 1, 2, 3, 4, 6 and 8 weeks. That was divided as fracture side and normal side. Mann-Whitney U test was performed for significant difference and the following result was obtained. 1. The maximum voluntary bite force for incisors, canine, premolars and molars portion were 0.113 kN, 0.182kN, 0.295kN and 0.486kN and the masseter muscle activity was 0.192 volts in the control group. 2. The maximum bite force at fracture side was recovered by 4th weeks for incisors, 6th weeks for canine and premolars and 8th weeks for molars and the masseter muscle activity was recovered by 6th weeks in the experimental group. 2. The maximum bite force at normal side was recovered by 4th weeks for incisors, 6th weeks for canine, premolars and molars and the masseter muscle activity was recovered by 3rd weeks in the experimental group. 3. The method for internal fixation by 2.0mm miniplates at both superior and inferior border had no complications according for twenty patients and had a satisfactory recovery. According to the result, patient with mandibular angle fracture and subcondyle fracture, 8 weeks was required for bite force recovery. Therefore, patients with open reduction and internal fixation under general anesthesis, it can be assumed that 8 weeks was needed after operation in order to have normal bite force and masseter muscle recovery.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.344-350
• /
• 2009

This paper proposes a hybrid antenna with novel beam steering scheme. The antenna have a cassegrain structure composed of two reflectors. The main reflector is designed for high gain performance using parabola curvature, and the sub-reflector is plate and can be rotated by ${\pm}3^{\circ}$. Thus proposed antenna can steer a antenna beam using the inclination of sub-reflector. A feed array composed of 20 elements is adapted as a feeder for electrical beam steering, and the antenna can be possible to steer the beam by the feed array with sub-reflector. Proposed antenna was fabricated to be operated in Ka-band(30.085$\sim$30.885 GHz) for TX and K-band(20.355$\sim$21.155 GHz), which are the operation frequencies of the Korean satellite, Mugunhwa, to provide satellite multi-media service to vehicles. By the performance test, it can be known that the antenna has minimum gain of 47 dBi for TX and 44.4 dBi for TX and can steer the beam by ${\pm}2^{\circ}$ with sub-reflector.

• Health Policy and Management
• /
• v.19 no.2
• /
• pp.71-84
• /
• 2009

Objectives : The purpose of this study is to analyze the proportion of admission via the emergency room(the rest is ER) in an emergency medical center and to examine the factors related to admission. Methods : This study used 2005 National Health Insurance claims data for admitted patients of 112 hospitals having emergency medical centers in Korea. The study sample had 2,335,610 patients. The data was classified into emergency admission and non-emergency admission. To investigate the factors affecting the type of admission, the following were included as independent variables: type of health assurance_(national health insurance beneficiaries or medical aid beneficiaries), demographic characteristics_ (sex, age), cause of admission_ (disease or injury), whether an operation was performed or not, DRG severity level, the number of beds, and the location of the hospital. Data were analyzed using the Chi-square test for the differences in emergency admission rates for each variables, and multiple logistic regression analysis was used for identifying the factors affecting admission type. Results : The proportion of admission via the ER accounted for 40.6% of the total admission among hospitals having emergency medical centers. The risk of admission via ER was relatively high for patients who were male, the aged, the injured, the surgical patients, the patients having more severe symptoms, and the patients admitted the hospitals located in metropolitan areas, and the patients admitted the hospitals having 300-699 beds. Medical aid patients were more likely admitted through the emergency room than health insurance patients after other variables ware adjusted. Conclusions and Discussion : We analyzed the proportion of admission via the ER for the total admission rate of hospitals having an emergency medical center in Korea. And we explored the factors related to admission via the ER. This proportion may be used as an indicator of the adequacy of medical utilization or low accessibility to hospitals of patients with low socioeconomic status.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.5
• /
• pp.1-12
• /
• 2009

The purpose of this research was to propose policy directions for the design and construction of nature-friendly park facilities (PF) in national parks. In order to do that, nature-friendliness evaluation indicators(NEIs) used in green building rating systems and related articles were reviewed. After the initial literature review was complete, NEIs for park facilities based on location, design, construction, operation, and management sectors were developed. Data was obtained through a questionnaire completed by 79 managers at 19 national parks in Korea in 2008. The answers were analyzed using descriptive statistical methods, a t-test, a multi-dimensional analysis, and a factor analysis. This research found that: 1) The results indicated that based on relative weight calculation, the location condition was evaluated as the most important; 2) The evaluation results regarding the degree of nature-friendliness of park facilities showed that location condition was ranked higher than design and construction--in addition, the evaluated values of indicators related to energy efficiency were ranked the lowest; 3) the level of nature-friendliness of shelter was given the highest level, but resting facility was the lowest level; 4) Overall, park facilities at Mt. Seorak, Mt. Odae, and Taean Coast national parks showed high levels of nature-friendliness. But park facilities at Mt. Gyeongju and Mt. Songni national parks showed low levels of nature-friendliness. The results of this research shall contribute to the establishment of tailor-made management policies, the development of detailed guidelines for increased energy efficiency and visitor satisfaction, and the preservation of ecosystems and natural resources in Korea's national parks.

• Korean Journal of Ecology and Environment
• /
• v.36 no.4 s.105
• /
• pp.467-472
• /
• 2003

In this study, an algal fence was developed and applied to reduce the input of algal scum into the water intake facility. The effectiveness of vertical algal fences(overlapped three types of meshes, (312 ${\mu}m$ ${\times}$ 375 ${\mu}m$, 390 ${\mu}m$ ${\times}$ 450 ${\mu}m$, and 0,7 cm ${\times}$ 1cm; vertical depth, 1.5 m; length of fence, about 120 m)) was experimentally tested at a water intake facility (Mulgum, lower Nakdong River). The application of the fence resulted in the statistically significant difference of algal biomass between inside and outside of the fence. According to ANOVA test, chi. a concentration in Day-1showed large difference at each depth of 0, 1, 2 m (0.001> p at each depth, n = 16 respectively). Especially large difference was observed at 0 and 1 m depth. However, the fence was only effective for a short period and its efficiency declined by Day-5after the installation. When better maintenance options for the fence are prepared, e.g. mechanical installation and periodic backwashing of the fence, the performance of algal fence may be sustained. In addition, reliable models for bloom prediction are required to provide an advanced indication of the optimal timing for the installation so that effective operation would be achieved.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.81-91
• /
• 2008

In this study, data collection delay time generated in bus information system is analysed and improvement on system reliability by minimizing the delay time is suggested. To minimize the data collection delay time (call setup time), factors on data collection phase are analyzed. Each connecting time that it occurs from wireless communication during data collection phase, is selected as a main effective variable and a model for selecting an optimum communication point to minimize the effect of data delay time by each connecting time is suggested. In this model, minimization of the point between the time carrying out wireless communication and vehicle moving time, is calculated and the difference between the bus arrival time and information delivered time to the passenger is reduced. The test results for the proposed model in BIS using a CDMA (Code Division Multiple Access) communication show that delay time in real system operation has been improved. The minimum data collection delay time based on optimal communication position leads to the better reliability for Bus Information System. This study can be applied to the selection of optimal communication position and detection position instead of empirical methods.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.8
• /
• pp.549-556
• /
• 2012

T-P removal efficiency was analyzed according to the metal to initial T-P ratio (mole basis) with respect to the samples from different WWTPs having various initial T-P and SS conditions. Also, operating costs were calculated based on the injected coagulant amount and the amount of sludge production. Most experiments were conducted by the standard jar-test protocol. Molar ratio of coagulant dose was varied considerably according to the initial SS concentration range in secondary clarifier effluent samples which had above 0.5 mg/L of initial T-P. Based on 90% T-P removal efficiency, results were: At the initial SS range of below 10 mg/L, Alum (8%) = 11 mol Al/mol P needed and PAC (17%) = 9.6 mol Al/mol P needed; At the initial SS range of above 10 mg/L, Alum (8%) = 3.9 mol Al/mol P needed and PAC (17%) = 3.2 mol Al/mol P needed.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.383-391
• /
• 2014

In this paper, temperature, pressure and flow analysis system for testing a fuel filter of a diesel engine at the low-temperature environment in winter, is proposed. The light oil of diesel engine below a specific temperature is changed to the waxing materials like paraffin, and it prevents engine to start easily because of reducing fluidity. Thus, built-in block heater should be installed with fuel filter in order to solve this problem. And it is necessary to design evaluation system that can analyze the performance according to temperature, pressure and flow characteristics near fuel filter at a very low temperature. In this paper, we measured a physical quantity related to the performance of around the fuel filter using the proposed system, and analyzed their characteristics. Also the measured data is transferred to remote user by using a web server of embedded systems, and analyzed their conditions in remote place via web browser in order to know the operating status of fuel filter. We installed the proposed system in a small test chamber to verify the performance and took an experiment in normal temperature and very low temperature, and could obtain temperature, pressure and flow of near the fuel filter. As a result, the fuel flow could be improved during operation of the fuel heater.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.202-207
• /
• 2016

Most of noises from cars or home appliances accompany successive impulsive noise due to repeated operation. A human auditory system is able to perceive the successive impulsive noise as either a set of independent noise or amplitude modulated noise according to its occurrence period. This study is to identify main influence factors on understanding of impulsive characteristics and find most appropriate sound quality metrics to express the successive impulsive noise. To do this, the successive impulsive noises were designed and utilized to perform a listening test for identifying conditions where successive impulsive noise can be recognized to have impulsive characteristics. These results were analyzed with sound quality metrics such as loudness, fluctuation strength, and roughness in order to compare the subjective results with the objective results. Consequently, the results revealed that the successive impulsive noise exhibits impulsive characteristics when its occurrence frequency is less than 50 Hz. It was also observed that roughness and fluctuation strength results are not applicable to express the successive impulsive noise because they heavily depend on the amplitude modulation characteristics. On the other hand, loudness results are considered to be useful as an evaluation factor of the successive impulsive noise through the use of loudness limen because it does not depend on the amplitude modulation characteristics.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.2
• /
• pp.74-82
• /
• 2015

In this study, a BMW plant process control system model which produces BMW is suggested and the BMW plant process controller with the following functions is developed. The first function is to operate the electronic overload relays to stop the blower for a certain period of time and to re-operate it again when the blower is overloaded. The second function is to close the motor operated valve automatically in case of power failure to prevent the circulation from the guided tank to the compost throwing tank and to block leak from the compost throwing tank due to the failure of ball valve. The third function is to transfer produced BMW from the concentration tank to 4 storage tanks for automatic managing of the BMW output. A device to measure the signal of the BMW plant process controller and a test equipment are developed. The designed BMW plant process controller is checked to see if it operates correctly according to the design specifications. The sequence control method based on BMW plant process controller is developed at a low cost in this study, so it is expected to bring improvements in the stability and the efficiency of system and to cause reductions in the operation and the management costs in the future.