• Journal of Society of Preventive Korean Medicine
• /
• v.21 no.1
• /
• pp.95-106
• /
• 2017

Objectives : Although interest in preventive medicine has increased recently, "Mibyeong", the preventive concept of Korean medicine, is still unfamiliar to the general public. Therefore, this study aims to investigate the concept of Mibyeong and users used on the Internet. Methods : Naver (www.naver.com), which has the highest ranking in terms of market share, number of visitors, search time share, and community category share, has been selected as a search target and jisik-iN Q&A and posts of cafe about Mibyeong were searched for recently approximately 6 years. Results : 105 cases of Jisik-iN Q&A and 283 cases of cafe posts were searched. Overall, the number of Jisik-iN Q&A and cafe posts's Mibyeong term usage was the highest in 2013. In the Internet user category, Mibyeong Term was used most commonly in the Jisik-iN Q&A by Korean medicine related medical personnel (29 cases, 28%) and in the cafe other health-related workers (87cases, 31%). In Mibyeong related cafe classification, Information Exchange (220 cases, 77%) was the most frequent and besides 39 cases (14%) used in Operation of Medical Institutions. And the concept of Mibyeong was often used as symptom-based rather than diagnostic test or disease (Cafe posts 52%, Jisik-iN Q&A 70%), in particular, topic of Mibyeong related Jisik-iN Q&A was used in the order of pain (31 cases, 16%), cancer (17 cases, 9%), fatigue (11 cases, 6%). Conclusions : This study has significance as basic research data of general Internet user group and can be used as fundamental data for awareness promotion, publicity and necessity of Mibyeong.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.2
• /
• pp.186-194
• /
• 2014

The object of this study was to obtain acute toxicity information (single-dose oral toxicity) of Woohwangchungshim-won (WHCSW), a pill type herbal medicine used in Korean Medicine (KM) for treating stroke. In order to obtain the 50% lethal dose (LD50), approximate lethal dosage (ALD) and target organs, WHCSW powders were once orally administered to female and male ICR mice at dose levels of 2,000, 1,000, 500 and 0 (control) mg/kg (body weight.) according to the recommendation of Korea Food and Drug Administration (KFDA) Guidelines (Notification No. 2009-116). The mortality and changes in the body weight, clinical signs and gross observation were monitored for 14 days after single-dose oral administration of WHCSW according to KFDA Guidelines with organ weights and histopathological changes were observed in 12 principle organs. After single-dose oral administration of WHCSW, we could not find any mortality and toxicological evidences up to 2,000 mg/kg-administered group, except for some accidental findings and dose-independent increases of body weight gains in female 1,000 and 500 mg/kg-administered female mice. The results obtained in this study suggest that the LD50 and ALD of WHCSW in both female and male mice after single-dose oral administration were considered as over 2,000 mg/kg because no mortalities were detected up to 2,000 mg/kg that was the highest dose recommended by KFDA and Organization for Economic Co-Operation and Development (OECD), and can be safely used in clinics.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.185-193
• /
• 2002

Most of NC machines are operated by Is06983 standard called G-code, which was developed in the early days of machine tools. This G-code limits hardware performance of the currently developed high-performance hardware & machine tools. By describing only movements of tool, almost all of information of previous production departments is lost, and the machining department cannot exchange information with other departments. For adjusting new hardware environment and direct communication of CNC machines with CAD/CAM software, ISO 14649, STEP -NC is researched. This new standard stores CAD/CAM information as well as operation commands of CNC machines. In this research, the new CNC machine operated by STEP-NC was built and tested. Unlike other STEP-NC milling machines, this system uses the STEP-NC file in form of XML as data input. It makes possible for STEP-NC machines to exchange information to other databases using XML. The mentioned system of this paper loads the XML file, analyzes it, makes tool paths of two5D features with information of STEP-NC, and machines automatically without making G-code. All of software is programmed with Visual C＋＋, and the milling machine is made with table milling machine, step motors, and motion control board for PC that can be directly controlled by C＋＋ commands. All modules of software and hardware were independent, it allows convenient for substitution and expansion of the milling machine. The example 1 in ISP14649-11 that had all information about geometry and machining and the example 2 that has only geometry and tool information were used to test automatic machining by the open-architecture milling machine.

• The Journal of Korean Physical Therapy
• /
• v.20 no.4
• /
• pp.71-78
• /
• 2008

Purpose: This study standardizes the position and direction of devices based on general user expectations and stereotypes. Population stereotypes are cognitive structures that contain the perceiver's knowledge, beliefs, and expectations about human groups. In this paper, the stereotypes that people typically expect when manipulating 'cylindrical key-in-knob locks' and 'lever-type water faucet handles' were investigated and data regarding their expectations were collected. Methods: Two sets of 600 participants, between 13 and over 60 years old, were recruited for the experiment. Each group was evenly subdivided into six age groups. Each participant was presented with cylindrical door locks mounted on a miniature door and actual lever-type water faucet handles mounted on a mockup sink. Results: If the cylindrical lock was positioned 'vertically,' 59.2% of the participants expected the device to be locked, and if the lever type faucet handle was positioned 'up,' 63.0% of the participants expected the device to be turned on. Thus, daily-use devices should be designed consistent with user expectations of operation. There was a significant difference between genders for manipulating the faucet handle between up and down. Conclusion: A more general stereotype may be defined by repetitive measurements under the same test conditions with fixed time intervals, as well as accounting for people with cognitive problems.

• New & Renewable Energy
• /
• v.4 no.4
• /
• pp.56-64
• /
• 2008

Anaerobic biodegradability (AB), which can be determined with the ultimate methane yield by the decomposition of organic materials, is one of the important parameters for the design and the operation of anaerobic digestion plant. In this study, Biochemical methane potential (BMP) test has been carried out to evaluate the methane yields of animal manures such as pig and cattle slurries, and different forage crops cultivated at the reclaimed tideland such as maize, sorghum, barley, rye, Italian ryegrass (IRG), rape, rush, and waste sludge produced from slaughterhouse wastewater treatment plant (SSWTP). In the ultimate methane yield and biodegradability of animal manure, those of pig slurry were 345 $mlCH_4/gVS_{fed}$ and 44.7% higher than 247 $mlCH_4/gVS_{fed}$ and 46.4% of cattle slurry (Cat. 2). The ultimate methane yield and biodegradability of spike-crop rye (Rye 1) were 442.36 $mlCH_4/gVS_{fed}$ and 86.5% the highest among different forage crops, those of the other forage crops ranged from 306.6 to 379 $mlCH_4/gVS_{fed}$ of methane yield with the AB having the range of about 60 to 77%. Therefore the forage crops could be used as a good substrate to increase the methane production and to improve the biodegradability in anaerobic co-digestion together with animal manure.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.349-357
• /
• 2015

The piezoelectric paint sensor is a paint type sensor comprising of an epoxy and piezoelectric powder, which is the main component of a piezoelectric material. This sensor can be easily attached to any type of structure as compared to other sensors because it is viable to directly apply it on structures, as in the case with a typical paint. In this study, the capability of piezoelectric paint sensor for impact detection was evaluated. In Particular, the applications of the piezoelectric paint sensor for railroad vehicles were considered. There have been various cases reported about the damages caused by flying gravel to the under-cover of the railroad vehicle during operation. In order to prevent this, real-time monitoring of the large under-cover surface of the railroad vehicle is unavoidable. Under the assumption of vehicle application, sensor sensitivities were measured after multiple and prolonged exposure to thermal cycle environment $-20{\sim}60^{\circ}C$). Sensitivity evaluation of paint sensor under environmental conditions was conducted in an aluminum specimen. In results, despite the small variations in sensitivity, we could confirm the applicability of this paint sensor for impact detection even after a severe environmental exposure test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.96-103
• /
• 2005

The main purpose of launch vehicle is to insert satellite into a target orbit safely and correctly. To accomplish the main purpose of launch vehicle, the inserting velocity, inserting angle, and final mass of launch vehicle should be within the allowable range. In general, such requirements are satisfied with applying TCS(Thrust Control System) and TDS(Tank Depletion System), which manage thrust and mixture ratio by controlling propellant flow rate with thrust and mixture ratio control valves. In this study, the control characteristics of thrust and mixture ratio control valve were examined by PID control logic for stable operation of liquid-Propellant rocket engine at on-dosing point. The analysis on the control characteristics of control valves was done with AMESim code and the results from control valve test facility at KARI.

• Structural Engineering and Mechanics
• /
• v.61 no.5
• /
• pp.675-684
• /
• 2017

In this paper, a hybrid seismic response control (HSRC) system was developed to control bridge behavior caused by the seismic load. It was aimed at optimum vibration control, composed of a rubber bearing of passive type and MR-damper of semi-active type. Its mathematical modeling was driven and applied to a bridge model so as to prove its validity. The bridge model was built for the experiment, a two-span bridge of 8.3 meters in length with the HSRC system put up on it. Then, inflicting the EI Centro seismic load on it, shaking table tests were carried out to confirm the system's validity. The experiments were conducted under the basic structure state (without an MR-damper applied) first, and then under the state with an MR-damper applied. It was also done under the basic structure state with a reinforced rubber bearing applied, then the passive on/off state of the HSRC system, and finally the semi-active state where the control algorithm was applied to the system. From the experiments, it was observed that pounding rather increased when the MR-damper alone was applied, and also that the application of the HSRC system effectively prevented it from occurring. That is, the experiments showed that the system successfully mitigated structural behavior by 70% against the basic structure state, and, further, when control algorithm is applied for the operation of the MR-damper, relative displacement was found to be effectively mitigated by 80%. As a result, the HSRC system was proven to be effective in mitigating responses of the two-span bridge under seismic load.

• Smart Structures and Systems
• /
• v.25 no.5
• /
• pp.559-567
• /
• 2020

Vibration at the tip of various flexible manipulators may affect their operation accuracy and work efficiency. To suppress such vibrations, the feasibility of using MFC actuators and sensors is investigated in this paper. Considering the convergence of the famous filtered-x least mean square (FXLMS) algorithm could not be guaranteed while it is employed for vibration suppression of plants with varying secondary path, this paper proposes a new multiple model switching adaptive control algorithm to implement the real time active vibration suppression tests with a new multiple switching strategy. The new switching strategy is based on a cost function with reconstructed error signal and disturbance signal instead of the error signal from the error sensor. And from a robustness perspective, a new variable step-size sign algorithm (VSSA) based FXLMS algorithm is proposed to improve the convergence rate. A cantilever beam with varying tip mass is employed as flexible manipulator model. MFC layers are attached on both sides of it as sensors and actuators. A co-simulation platform was built using ADAMS and MATLAB to test the feasibility of the proposed algorithms. And an experimental platform was constructed to verify the effectiveness of MFC actuators and sensors and the real-time vibration control performance. Simulation and experiment results show that the proposed FXLMS algorithm based multiple model adaptive control approach has good convergence performance under varying load conditions for the flexible cantilever beam, and the proposed FX-VSSA-LMS algorithm based multiple model adaptive control algorithm has the best vibration suppression performance.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.3703-3708
• /
• 2015

Background: The neutrophil-to-lymphocyte ratio (NLR) is a strong predictor of mortality in patients with colorectal, lung, gastric cancer, pancreatic and metastatic renal cell carcinoma. We here evaluated whether preoperative NLR is an independent prognostic factor for non-metastatic renal cell carcinoma (RCC). Materials and Methods: Data from 327 patients who underwent curative or palliative nephrectomy were evaluated retrospectively. In preoperative blood routine examination, neutrophils and lymphocytes were obtained. The predictive value of NLR for non-metastatic RCC was analyzed. Results: The NLR of 327 patients was $2.72{\pm}2.25$. NLR <1.7 and NLR ${\geq}1.7$ were classified as low and high NLR groups, respectively. Chi-square test showed that the preoperative NLR was significantly correlated with the tumor size (P=0.025), but not with the histological subtype (P=0.095)and the pT stage (P=0.283). Overall survival (OS) and disease-free survival (DFS) were assessed using the Kaplan-Meier method. Effects of NLR on OS (P=0.007) and DFS (P=0.011) were significant. To evaluate the independent prognostic significance of NLR, multivariate COX regression models were applied and identified increased NLR as an independent prognostic factor for OS (P=0.015), and DFS (P=0.019). Conclusions: Regarding patient survival, an increased NLR represented an independent risk factor, which might reflect a higher risk for severe cardiovascular and other comorbidities. An elevated blood NLR may be a biomarker of poor OS and DFS in patients with non-metastatic RCC.