• Journal of Soil and Groundwater Environment
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2015

The objectives of this study were to calculate the radius of influence (ROI) of well for an air-sparging (AS)/soil vapor extraction (SVE) system and to evaluate the applicability of the system applied for the remediation of the petroleum contaminated rail site. For air permeability test, three monitoring wells were installed at a location of 1.3 m, 2.3 m, 3.0 m from the extraction well. And the pressure of each monitoring well was measured by extracting air from the extraction well with the pressure and flow of $(-)2,600mmH_2O$ and $1.58m^3/min$. The ROI for an extraction well was calculated as 4.31 m. Air was injected into the injection well with the pressure and flow of $3,500mmH_2O$ and $0.6m^3/min$ to estimate the radius of influence for oxygen transfer. Oxygen concentrations of air from three monitoring wells were measured. The ROI of an injection well for oxygen transfer was calculated as 3.46 m. The 28 extraction wells and 19 injection wells were installed according to the ROI calculated. The AS/SVE system was operated eight hours a day for five months. The rail site was contaminated with the petroleum and concentrations of benzene, toluene, and xylene were over the 'Worrisome Standard' of the 'Soil Environment Conservation Act'. The contaminated area was estimated as $732m^2$ and contaminants were dispersed up to (-)3 m from the ground. During the operation period, soil samples were collected from 5 points and analyzed periodically. With the AS/SVE system operation, concentrations of benzene, toluene, and xylene were decreased from 7.5 mg/kg to 2.0 mg/kg, from 32.0 mg/kg to 23.0 mg/kg, from 35.5 mg/kg to 23.0 mg/kg, respectively. The combined AS/SVE system applied to the rail site contaminated with volatile organic compounds (VOCs) exhibited a high applicability. But the concentration of contaminants in soil were fluctuated due to the heterogeneous of soil condition. Also the effect of the remediation mechanisms was not clearly identified.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.164-170
• /
• 2017

The CNC machine tool field is showing a growing trend with the recent rapid development of manufacturing industries such as semiconductors, automobiles, medical devices, various inspection and test equipment, mechanical metal processing equipment, aircraft, shipbuilding and electronic equipment. However, small and medium-sized machining companies that use CNC machine tools are experiencing difficulties in increasingly intense competition. Especially, small companies which are receiving orders from 3rd or 4th venders are very difficult in business management. In recent years, company S experienced difficulty to make product quality and delivery time due to the ignorance of the processing method when manufacturing cooling plate jig made of SUS304 material used for cell phone liquid crystal glass processing. In order to solve these problems, we redesigned the process according to the size of our company and tried to manage all processes with quantified data. In the meantime, we have found that there is a need to improve the cutter process, which accounts for most of the machining process. Therefore, we have investigated the correlation between RPM and FEED of three cutters that have been used in the past. As a result, we found that it is the most urgent problem to solve the roughing process during the cutter operation which occupies more than 70% of the total machining. In order to shorten the machining time and improve the quality in machining of SUS304 cooling plate jig, we select the main factors such as price, tool life, maintenance cost, productivity, quality, RPM, and FEED and use AHP to find the most suitable milling cutter. We also tried to solve the problem of delivery, quality and production capacity which was a big problem of S company through experiment operation with selected cutter tool. As a result, the following conclusions were drawn. First, the most efficient of the three cutters currently available in the machining center has proven to be an M-cutter. Second, although one additional facility was required, it was possible to produce the existing facilities without additional investment by supplementing the lack of production capacity due to productivity improvement. Third, the Company's difficulties in delivery and capacity shortfalls have been resolved. Fourth, annual sales increased by KRW 109 million and profits increased by KRW 32 million annually. Fifth, it can confirm the usefulness of AHP method in corporate decision making and it can be utilized in various facility investment and process improvement in the future.

• Journal of Korean Academy of Nursing
• /
• v.26 no.3
• /
• pp.591-604
• /
• 1996

The surgical hand scrub (SHS) is the single most important procedure in the prevention of post-operative wound infections and yet it remains the most violated of all infection control procedures. The purpose of this study was to gain an overview of SHS habits in operative th atre personnel and to determine knowledge and attitudes to identify whether there is a need for improvement. The subjects for this study included 79 doctors and 94 nurses working in the operative th atres of four hospitals in Incheon City and Kyungki Province. Related data were collected from July 25 to August 10, 1995 by the author. The data were analyzed using descriptive stat-istics and Chi-squre test. The results of the study are summarized as follows : 1. Nurses felt that they conducted SHS for a longer period of time than doctors did(X=20.1, P=.005). 2. Nurses and doctors had some knowledge of slip-ping rings off fingers and the length of nails, but they lacked knowledge on the duration of SHS, handwashing after an operation and on manicure. 3. There were many reasons given for insufficient SHS included : 1) because they were so busy (38%). 2) brushes were too harsh(19.7%). 3) operations were very simple(18.7%). 4) surgical latex gloves provide functional barrier(11.6%). 5) SHSs were troublesome(7.4%) 6) there were no clocks near the sinks(2.5%) and 7) the operative patients were administered antibiotics after operartion(2.1%). 4. Most of nurses and doctors considered SHS to be important in prevention against post operative infections. 5. Nurses were found to do a thorough SHS, but residents were found to neglect SHS. 6. Considering prevention against postoperative infections, most nurses and doctors considered aseptic techniques, environment-sanitary management and SHS more important than the use of antibiotics, the resistance of patients or the method of operation. 7. Half of the nurses and doctors(54.3%) considered surgical latex gloves to function well as a barrier. 8. Half of the nurses (56.4%) and doctors(51.9%) learned SHS as part of the curriculum in their school education and the rest(nurses : 95.7%, doctors : 74.7%) learned SHS as part of their In Service Education. In conclusion, these findings suggest a need to develop an educational program on surgical hand scrub and hospital infection control for surgical personnels, to install clocks near the hand scrub sinks, to consider a violation report for negligent surgical hand scrubs, and to develop a soft brush for hand scrubs in order to increase performance of the surgical hand scrub.

• The Korean Journal of Rehabilitation Nursing
• /
• v.4 no.1
• /
• pp.73-83
• /
• 2001

The aims of this study were to identify the mothers educational needs when they have children who have had open heart surgery in congenital heart disease, to identify the children's characteristics with this problem, and also to provide the basic information on the development of the educational program for the mothers. The subjects of the study were 101 mothers of children and their children hospitalized with congenital heart disease in pediatric wards of G. University Hospital in Inchon and S. Hospital in Puch on from June to November 2000. The study used a Likert-type questionnaire with 39 questions which was based on a previous questionnaire developed by Lee Mi-ryun(1989) for adult open heart surgery patients. The reliability of the questionnaire was Cronbach' ${\alpha}$=.9375. The data were collected directly from mothers of the patients in wards. The t-test, ANOVA was adopted for the data analysis. The key results of the study are as follows : 1) The average age of the children was 32.90 months. The majority of the children are male and weighted 3.0-3.5Kg at birth. Most of the children had VSD(29.7%), and 10.9% of children had a family history of heart disease. 2) An average score of 4.62 out of a maximum of 5.00 was recorded for the educational needs of the children's mother. The highest score of 4.69 was for home care after discharge followed by a score of 4.67 for diagnosis and prognosis on congenital heart disease. And pre-post operation care scored 4.51. The mean scores of single-question items of educational need were, in order, 4.81 for immunization after operation, 4.80 for recovery process, and 4.77 for prognosis of the disease. The score of 4.18 for measurement of intake and output was the lowest. 3) The analysis on the children's mothers educational needs by social-demographic characteristics such as sex, age of patient and mother, economical status, educational status, number of child, hospitalization times, and hospitalization cause showed no significant difference statistically, but there was a significant difference between mothers with jobs and with out jobs.

• Korea Journal of Hospital Management
• /
• v.16 no.4
• /
• pp.35-66
• /
• 2011

This study analyzed efficiency by utilizing DEA analytical technique centering on materials for 2009 of 20 major university hospitals in capital area. Input variables were utilized professor & full-time doctor, resident, nurse & number of bed hospitals. Output variables were analyzed by dividing number of annual outpatients & number of annual inpatients, and annually total outpatient profit & inpatient profit into a model of the standard for number of patients and the standard for medical profit. DEA analysis was elicited efficiency score by applying CCR, BCC, BFG, scale profit, and SE model. Through t-test after eliciting efficiency score, the implications were suggested by comparing efficiency between DMU in Seoul and DMU in capital area, by comparing between high-class general hospitals and general hospitals, and by comparing between high-class general hospitals in Seoul and 5 big hospitals. As a result of analysis, the major university hospitals in capital area showed high efficiency as a whole close to "1," but indicated low efficiency relatively in CCR field. Thus, the expansion in scale within capital area was indicated to reach the limit. Second, in a model of analyzing the standard for number of patients, the medical institutions, which are being operated efficiently, were indicated to be 10 DMUs. In the standard for medical profit, 12 DMUs were analyzed to be operated efficiently. Third, the efficiency in general hospital was higher than high-class general hospital. Thus, the efficiency of operation was indicated to be more important than scale. Also, large high-class hospitals(big 5) where are located in downtown Seoul showed the higher efficiency than other general high-class general hospitals, but were indicating very low efficiency in some DMUs. Fourth, as a result of generalizing and evaluating the number of patients and the medical profit, the efficient DMU was indicated to be more when analyzing on the basis of medical profit than the standard for number of patients. Thus, major university hospitals in capital area were indicated to make more effort for section in medical profit. Based on the analytical results of efficiency, a strategy for reinforcing efficiency in inefficient DMU was indicated to be needed a strategy of creating customers for promoting number of patients and a strategy for making operation efficient for increasing profitability.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.47-55
• /
• 2017

As preliminary work for the establishment of a harmonized ship hand signal standard, this paper explores the availability of hand signals as a means of shipboard work communication and considers the validity of standardization. Prior to the feasibility study, shipboard work activities that use hand signals were classified based only on ship safety managers' arbitrary decisions. This survey was carried out to measure shipboard workers' willingness to communicate with hand signals and their preferences regarding the institutional standardization of a hand signal framework if they engage in activities classified as relevant. The results of statistical analysis (a t-test and correlation analysis) showed that respondents are willing to accept harmonized hand signals regardless of both their work type (crew/safety supervisors) and work department (deck/engine room) under working situations where hand signals are an available means of communication. In addition, there was a significant difference in the extent of shipboard workers' frequency of hand signal usages between each type of work activity, indicating a significant positive (+) correlation between frequency of usage and preference for standardization. Finally, it was concluded that shipboard work communication would be effectively improved if a follow-up study is carried out to establish prioritized harmonized hand signal standards for port-related work activities, such as crane operation, windlass/winch operation, line movement/delivery and cargo hold operations.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.109-119
• /
• 2013

An unmanned ground vehicle(UGV) today plays a significant role in both civilian and military areas. Predominantly these systems are used to replace humans in hazardous situations. To take unmanned ground vehicles systems to the next level and increase their capabilities and the range of missions they are able to perform in the combat field, new technologies are needed in the area of command and control. For this reason, we present war field simulator based on information fusion technology to efficiently control UGV. In this paper, we present the war field simulator which is made of critical components, that is, simulation controller, virtual image viewer, and remote control device to efficiently control UGV in the future combat fields. In our information fusion technology, improved methods of target detection, recognition, and location are proposed. In addition, time reduction method of target detection is also proposed. In the consequence of the operation test, we expect that our war field simulator based on information fusion technology plays an important role in the future military operation significantly.

• Journal of dental hygiene science
• /
• v.14 no.3
• /
• pp.411-416
• /
• 2014

The purpose of this study was to examine the effects of conscious sedation on pain and anxiety of patients in implant surgery. A total of 95 patients who underwent implant surgery were included in the study. In this study, the patient's anxiety and pain to evaluate the pre-operative Visual Analogue Scale (VAS), during-operative Pain Question (PQ), post-operative (Short-form McGill Pain Questionnaire [SF-MPQ], VAS) was used for tools such as questionnaires. The data were analyzed using the chi-squire, independent-samples t-test, multiple linear regression analysis. As a result, the pain reduction was significantly different between the sedative dental treatment and non-sedative dental treatment (p<0.05). The finding of the study multiple linear regression analysis showed that operation time, implant surgery experience, gender, age, operation form and Pain Catastrophizing Scale (PCS) with factors that affect the pain and anxiety (p<0.05). According to the results of the study, considered to be necessary to develop intervention strategies effective using the PCS when managing pain and anxiety of behavior management of this implant patient. Thus, it is advised to provide necessary practical guidelines and dental utilization behaviors on patients with conscious sedation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.47-53
• /
• 2011

The Electric Multiple Unit (EMU) has many types of door system such as sliding door, plug door etc.al. according to customer's requirements. The sliding door is widely used in Korea but has weak point in the noise problem. In the low operation speed, the noise coming from outer side of the EMU is not an important factor. As the speed is higher than before, noise is increased and make a problem. The main cause of noise is the imperfect air tightness in the EMU. The plug door system has advantages for the noise reduction characteristic in the high speed area. We have been developing electric plug-in door. The door is controlled by Door Control Unit(DCU) following the order of Automatic Train Protection (ATP) that is a kind of train signalling system. DCU has to simultaneously open and close the doors and the operation of it is related to the passengers safety. So DCU is a safety device that is important to reliability and safety. DCU is composed of several devices of control, motor driving, Input/Output, communication and power. In this paper, we will describe the functions, characteristic, requirement, subsystem and test results of DCU used for the electric plug-in door.

• Korea Journal of Hospital Management
• /
• v.7 no.4
• /
• pp.172-192
• /
• 2002

The purpose of this study is to ascertain whether the effect of introduction of OCS(Order Communication System) to the hospital is satisfied or not comparing the anticipated effect with the actual effect. For this purpose, a domestic hospital which has introduced and has been operating OCS for several years was chosen. Based on the internal data of S Hospital prepared before introducing OCS, researcher has analyzed the basic direction, design standard and status of operation after the introduction of OCS, etc. After analyzing the status of operations of several departments using OCS and interviewing with the chiefs of pertinent departments, a survey form was designed. Actual survey and interviews were conducted by the researcher for weeks to know whether doctors, nurses, medical technicians and clerks of the patient management dept. were satisfied with OCS and to find if they have any recommendations to improve OCS. Based on the analysis of survey, the effect of OCS was evaluated whether it has satisfied the anticipated effectiveness. For the question if they feel convenient in using OCS, doctors, nursing staffs in charge of ward and the staffs of billing dept. has answered that they were all satisfied(100%). The answers for the same question were relatively high in the case of nurses in charge of outpatient and staffs of radiography. Of course, there have been some nurses and staffs who complained for the inconvenience. However, overall satisfaction was high on the average. Some common problems occurred after the introduction of OCS were frequent errors due to instability of OCS system, paralysis of function of hardware on data back-up system and redundant investment due to erroneous choice of DB program in setting DB. It was also pointed out that lack of computer education and low participation of medical staffs has resulted in failure of developing effective software. As a result, it has lowered the efficiency of OCS. For example, some works have to be done by hands even after OCS. Based on the result of this research, recommendations to maximize the effect of OCS were presented as follows. First, strong leadership of CEO and active cooperation of doctors are mandatory. Second, all the process of hospital work should be analyzed and be redesigned in more efficient ways. Third, OCS should be designed to be user-based system which can be used efficiently by all staffs of the hospital. Forth, prior to the operation of OCS, proper tests of the program and trainings of the pertinent staff are required. Fifth, prior to the selection of hardware, BMT(Bench Marking Test) should be conducted. Sixth, before introducing OCS, staffs in charge of OCS should visit many hospitals operating the OCS system and take their cases into account.