• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.1039-1050
• /
• 2021

The purpose of this study is to measure load data for a 55 kW class agricultural tractor during a harvesting operation and to analyze the required power according to the working conditions. A field test was conducted at three different tractor speeds (1.2, 1.3, and 1.4 km·h^-1). A load measurement system was developed for the front axles, rear axles, and for power take-off (PTO). The torque and rotational speeds of the axles and PTO were measured during the field test and were calculated as the required power. The results showed that the total required power was in the range of 4.86 - 5.48 kW during the harvesting operation according to the tractor speed, and it was confirmed that this represents a ratio of 8.8 - 10.0% of the engine rated power. Also, it was confirmed that the required power of the axle and PTO increased as the tractor speed increased. In future studies, we plan to supplement the measurement system for a tractor to include a hydraulic system and perform a field test for harvesting various underground crops.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.1
• /
• pp.74-81
• /
• 2019

According to the recent presentation by the Korean Maritime Safety Tribunal, about 70% of marine accident occurs from fishing vessel, and 90% of cause of entire marine accidents attributes to human error. As fishing vessels require basic operations, fishing operations, other additional operations and techniques such as fish handling, cultivating excellent marine officer to prevent marine accident and develop industry is very important. A fisheries training ship is still very difficult to satisfy the demand for diversity of fishery training and sense of realism of the industry. As the result of employment expectation by category of business survey targeting 266 marine industry high school graduates who hope to board fishing vessels for the last four years, tuna purse seine was the highest with 132 cadets (49.6%), followed by offshore large purse seine (65 cadets, 22.4%), and tuna long line (35 cadets, 13.2%). The Korea Institute of Maritime and Fisheries Technology (KIMFT) has replaced old jigging and fish pot fishery training ships and proceeded developing and building multi-purpose fisheries training ships considering the demand of industry and the promotion of employment; however, the basic fishing method was set for a tuna purse seine. As a result of seakeeping model test, it can conduct the satisfiable operation at sea state 5, and survive at sea state 8.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.320-326
• /
• 2021

AVTE(Air Vehicle Test Equipment) is an equipment to inspect and check the status of on-board aircraft LRUs(Line Replacement Units) before and after flight for performing successful UAV(Unmanned Aerial Vehicle) missions. This paper suggests utilization of the AVTE as an operation support-equipment by implementing several critical functions for UAV-operation on the AVTE. The AVTE easily sets initialization(default) data and compensates for the installation and position errors of the LRUs which provide critical mission data and situation image with pilots without additional individual operation support-equipment. Major fault list and situation image data could be downloaded after flight using the AVTE in the event of UAV emergency situation or unusual occurrence on duty as well. We anticipate the suggested operational approach of the AVTE could dramatically reduce the cost and man power for design and manufacture of additional operation support equipment and effectively diminish workload of the operator.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.5
• /
• pp.359-369
• /
• 2024

Data-driven model for estimating fuel oil consumption in seaways is suggested using the model test results and operation data. The data-driven model requires the forecasted wind speed, direction, and the desired ship speed as inputs to predict the engine speed, power, and fuel oil consumption. The structure of the data-driven model is based on the deterministic model of added power of a similar vessel of which model test results in the calm water and head seas are accessible. For a given wind speed, the wind resistance and added resistance in irregular waves presented by Pierson-Moskowitz spectrum are computed to be applied to the propulsion performance prediction. The deterministic model takes a cubic approximation between the wind speed and engine speed. The model is tuned by actual operation data in seaways with various wind direction groups. The shaft power and fuel oil consumption estimation are added to the model to be validated with the operation data. The prediction model is validated with the operation data to confirm that the estimation of the engine speed is the most significant uncertainty source.

• Journal of Aerospace System Engineering
• /
• v.1 no.3
• /
• pp.13-20
• /
• 2007

The objective of this study is to investigate endurance test of localization part for T-50 aircraft engine. Major localization parts of the engine (F404-STW-102) was performed using Accelerated Simulated Mission Engine Test. The purpose of this test is to evaluate of quality demonstration capability, to verify design of engine localization parts, and to improvement safety and operation rate of T-50 advanced trainer by finding out operational problems in production phase and fixing it.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.914-917
• /
• 2008

A quad-functional built-in test circuit has been developed for DRAM-frame-memory embedded SOG-LCDs. The quad function consists of memory test, display test, serial transfer test, and parallel transfer test which is the normal operation mode for our SOG-LCD. Results of memory and display tests are shown.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.31-33
• /
• 2003

Recently, KARI developed in-house meteorological sensor processing system named MESIS for GOES GVAR 5-CH Imager for better KOMPSAT EOC mission operation. MESIS consists of antenna system, receiver, serial telemetry card, processing and mapping software, and 2 NT PC systems. This paper shows system requirement, system design, characteristic and test results of processing system. System operation concept and sample image are also provided. Implemented system was proven to be fully operational through lots of operations covering from RF signal reception to web publishing.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3236-3240
• /
• 2007

This paper describes the results of steam turbine performance tests. The objectives of performance test is to exactly evaluate the degradation(decrease in performance) of the coal-fired steam turbine generator in order to provide plant information to help performance engineers identify problems, improve performance, and make economic decisions about scheduling maintenance and optimizing operation. To achieve these goals, the periodic thermal performance tests have been carried out since the initial operation period, 1997. We made the calculation program and guidelines for the tests and developed the performance index of the turbine cycle on the basis of the ASME PTC. By comparing the performance changes throughout the whole operation period, we confirmed the performance reliabilities of the turbine and its conditions.

• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.103-107
• /
• 2017

The Satellite OBC(On Board Computer) manages critical functionality such as satellite attitude control, fault management, payload management, command/telemetry processing etc. The OBC consist of various modules. Each module perform mission critical operation. So all modules designed as hot or cold redundancy architecture. The redundancy design gives a guarantee high reliability and it allows normal operation of satellite using reconfiguration capability. In this paper, introduces reconfiguration unit operation and describe the results of testing in the ETB.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.2
• /
• pp.69-76
• /
• 2017

고흥 항공센터에 2019년(예정) 신규 활주로가 설치되고, 비행시험 관련 시설, 장비들을 단계적으로 구축하여 국가 비행종합성능시험장으로 운영할 예정이다. 국가 비행종합시험장은 공항이 아닌 비행장으로 운영할 예정이다. 비행장에는 특별히 정하는 운영규정이 없는 실정이다. 그러나 특수한 목적으로 신설되는 국가 비행종합성능시험장을 보다 안전하고 효율적으로 운영할 수 있도록 관련법규와 국내 공항 및 비행장 운영관리 현황 조사, 해외의 비행장 운영관련 법규와 운영실태 조사, 해외 항공 전문가 자문 및 출장을 통하여 향후 국내 관련법규 제정 및 비행종합시험장 운영 시 활용할 수 있도록 지침을 제시하였다.