• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.881-887
• /
• 2005

A total knee replacement is an extremely 'position-sensitive' operation; a malposition or a malalignment of the components will lead to a breakage of the component, a fracture around the knee prosthesis, and the limitation of range of the motion, etc. In a conventional total knee replacement, surgeons have to select an appropriate prosthesis according to the shape of the surgical region. A wrong selection may give rise to side effects or to need re-operation. Nevertheless, it is so difficult to choose the most proper prosthesis out of various kinds of prosthesis. This paper presents a surgical planning system for the total knee replacement with an operation simulating method in order to determine the parameters for the total knee replacement operation. We select an alignment axis and a resection angle as major operation parameters in the total knee replacement operation, and introduce the method to determine the major operation parameters with the operation simulator we developed. The simulator is used to determine operation parameters for optimized operations, to select the most appropriate prosthesis, and to analyze the prospective problems of the operation.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.2
• /
• pp.251-258
• /
• 1994

To apply the Power MOSFET to the high powerd circuits, the parallel operation of the Power MOSFET must be considered because of their low power rating. This means, in practical applications, design methods for the parallel operations are required. However, it is very difficult to investigate the problem of parallel operations by directly changing the internal parameters of the MOSFET. Thus, in this paper, the effects of internal parameters for the parallel operation are investigated using SPICE program which is often used and known that the program is very reliable. The investigation results show that while the gate resistance and gate capacitances are the parameters which affect to the dynamic switching operations, the drain and source resistances are the parameters which affect to the steady-state current unbalances. Through this investigation, the design methods for the parallel operation of the MOSFET are suggested, which, in turn, contributes to the practical use of Power MOSFETs.

• Journal of KIISE:Software and Applications
• /
• v.37 no.9
• /
• pp.694-705
• /
• 2010

The mutation operation is the main operation in the evolutionary programming which has been widely used for the optimization of real valued function. In general, the mutation operation utilizes both a probability distribution and its parameter to change values of variables, and the parameter itself is subject to its own mutation operation which requires other parameters. However, since the optimal values of the parameters entirely depend on a given problem, it is rather hard to find an optimal combination of values of parameters when there are many parameters in a problem. To solve this shortcoming at least partly, if not entirely, in this paper, we propose a new mutation operation in which the parameter for the variable mutation is theoretically estimated from the self-adaptive perspective. Since the proposed algorithm estimates the scale parameter of the Cauchy probability distribution for the mutation operation, it has an advantage in that it does not require another mutation operation for the scale parameter. The proposed algorithm was tested against the benchmarking problems. It turned out that, although the relative superiority of the proposed algorithm from the optimal value perspective depended on benchmarking problems, the proposed algorithm outperformed for all benchmarking problems from the perspective of the computational time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.6
• /
• pp.537-545
• /
• 2009

In this paper, new parameters were developed to estimate the depth of anesthesia during a general anesthesia using EEG. Power spectral density(PSD) analysis was used for these parameters because EEG became slow wave during anesthesia. The new parameters were DTR, ATR, TDR, ADR, BTR and BDR applied to PSD. These parameters were compared with SEF which is conventionally used at clinic and confirmed clinical value. As the results, DTR, ATR, TDR, ADR among parameters were not useful compared with SEF but BTR and BDR is valuable for clinic. 15 patents, at pre-operation BDR the value is $265.36{\pm}25.29$, at induction the value is $129.23{\pm}34.92$, at operation the value is $154.99{\pm}38.34$, at awaked the value is $283.83{\pm}39.80$ and at post-operation the value is $234.80{\pm}23.46$. Also at pre-operation BTR value is $183.38{\pm}13.59$, at induction the value is $104.09{\pm}25.11$, at operation the value is $115.38{\pm}23.42$, at awaked the value is $190.33{\pm}23.31$ and at post-operation the value is $172.38{\pm}19.08$. Trend of BDR and BTR is similar to change of SEF, so two parameters are useful. to estimate the depth of anesthesia.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.4
• /
• pp.71-78
• /
• 2011

This paper contains the selection of operation parameters for protection and control of steam turbine in a Korea Standard Type Nuclear Power Plant. The safety of nuclear reactor must be ensured which generates nuclear energy and produces steam. Also, the safety of turbine, which consume the nuclear energy as a core machine, must be ensured. For the purpose of this, we describe how the operating parameters were selected, reviewed, implemented into the operator console and finally put into actual operation of the system.

• Journal of Korean Society of Transportation
• /
• v.14 no.1
• /
• pp.69-80
• /
• 1996

In most cities, travel demand is distributed along long corridors and its destinations tend to concentrate in a central business district. For this kind of many-to-one or one-to-many travel demand pattern, a zonal operation of buses can be an efficient bus operation technique in which a long bus-demand corridor is divided into service zones and each service zone is provided with its own bus route connecting the service zone and single destination separately. This paper develops models of the total transportation costs for a single-zone operation and 2-zonal operation of buses for a long demand corridor with single destination in terms of various cost parameters, demand density, bus operation speeds, and location of the boundary between two service zones. In this study the total transportation cost is assumed to consist of the bus operation cost, passenger waiting cost and passenger travel time cost. It was proved that a zonal operation of buses can be more efficient than a single-zone operation for certain circumstances of the system and an boundary condition between two operation techniques was obtained. Also, several case studies were performed for various values of the cost parameters.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.421-427
• /
• 2008

In manufacturing industry, cutting parameters have an influence on reducing the production cost and time and deciding the quality of a final product However, owing to governmental regulations and the change of owner's cognizance, the machining safety becomes important in those fields relatively. The paper presents an intelligent operation planning system considering machining safety for milling operations. The main issue of the system is to determine the cutting parameters in achieving a balanced consideration of productivity and worker's safety. The detailed algorithm and functions of the developed system is introduced and then discussed.

• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.116-121
• /
• 2006

In metal cutting processes, cutting conditions have an influence on reducing the production cost and deciding the quality of a final product. Process planners usually make modification to recommended cutting parameters obtained from machining data handbooks in order to satisfy requirements for individual operation. The modified cutting parameters also need to be examined for the safe machining. In this paper, a new operation planning system that allows the generation and check of modified cutting parameters is proposed for the milling process. A neural network methodology is introduced to identify mathematical models for generation of the modified cutting parameters, and several simplified rules and equations are presented for the check of the cutting parameters. Finally, the results are demonstrated with an example part.

• Journal of Environmental Science International
• /
• v.11 no.1
• /
• pp.63-68
• /
• 2002

In this study, we examined statistical analysis between sewage plant operations parameters and effluent quality We got six components from principle component analysis of the operation parameters and secondary effluent quality. 91.8% of the total variance was explained by the six components. The components were identified in the following order : 1) organic matter removal by aeration basin microbe, 2) settleability on secondary clarifier load, 3) removal of nutrients, 4) microbial number increasement and species diversity, 5) microbial activity in aeration basin, 6) oxidation in aeration basin.

• Journal of Mechanical Science and Technology
• /
• v.15 no.1
• /
• pp.81-87
• /
• 2001

Cyclic variability limits the range of operating conditions of spark ignition engines, especially under lean and highly diluted operation conditions. The cyclic combustion variations can be characterized by pressure parameters, combustion related parameters, and flame-front related parameters. The coefficient of variation (COV) in indicated mean effective pressure (IMEP) defines the cyclic variability in indicated work per cycle.