• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.756-762
• /
• 2013

The economical feasibility was conducted to find the adequate method to treat the dredged sediments from agricultural reservoirs in a pilot project that had been operated to improve the quality of water and benthic environments by dredging of contaminated sediments. For benefit/cost (B/C) analysis, the net expenses were considered as the costs of project, and the benefits were calculated from the saving of waste-treatment cost through reuse of dredged sediment, the saving of construction cost of settling pond, and the values of retained water by dredging. Although the economic feasibility depended on the sites of operation, the average B/C value of the pilot project was estimated as 1.32, indicating this project is economically feasible. Depending on the treatment methods, the B/C values were in the order of the methods of coagulating sedimentation, machinery dewatering, stabilization through exothermic reaction, and soil improvement and stabilization. The machinery dewatering method is estimated as the most adequate one to treat the dredged sediments because of the minimum riskiness of secondary pollution, the recyclability, and its economic feasibility.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.465-472
• /
• 2015

SEEMP (Ship Energy Efficiency Management Plan) guidelines for a ship's GHG reduction include a machinery modification of hull, an installation of energy efficiency enhanced attachment in hardware methods. It is also possible to bring a ship energy efficiency improvement by fuel-efficient operations or in other software methods. Hardware modification or installation on ship can bring financial burdens to a ship company compared to its improvement expectation. On the other hand, Software based energy-saving technology can be applicable on various ship types, and it is also expected high efficiency of ship energy use compared to hardware based technology in perspective of the investment costs and efficiency. In this paper, it is described that the ship handling simulator based evaluation was carried out using representative ship model of bulk, container and VLCC. Simulation environments were separated into 6 conditions according to the sea-state and weather condition, and the operation results were compared with those before and after energy saving system applied The container ship showed the largest FOC save rate after energy saving system applied although the others also showed energy save rate after using the system.

• Pediatric Infection and Vaccine
• /
• v.22 no.3
• /
• pp.136-142
• /
• 2015

The Korean Society of Pediatric Infectious Diseases (KSPID) has participated in the task force team consisting of government authorities as well as civil medical experts and facilities to block the spread of Middle East Respiratory Syndrome in 2015. KSPID posted the "Middle East Respiratory Syndrome (MERS) Pop-up" in the homepage of The Korean Pediatric Society and The Korean Society of Pediatric Infectious Diseases. KSPID also released the "Guidelines for testing for MERS in children and adolescents" and the "Instructions for the Operation of National Safe Hospital" for children and adolescents in a timely manner. Such actions were aimed to prevent unnecessary anxieties, studies and isolation of pediatric patients with respiratory symptoms and signs caused by other common microbial etiologies as being suspected for MERS patients. This strategy relieved the doctors and parents from unnecessary fear and prevented the loss of unnecessary health care costs, and has proven to be a well-judged guideline and management protocol as evaluated after the final end of MERS outbreak. KSPID and its members should support the presence of pediatric infectious disease (PID) specialists in every medium size hospitals in Korea by developing the need for consultation fees for PID consultation in the hospital based practice and promoting the potential for cost savings related to prevention of health care associated infections and optimal prescription of antimicrobial agents. KSPID and its members need to approach and develop a communication plan to political decision makers to demonstrate and convince them of the importance of a PID specialist service.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.120-125
• /
• 2016

For the purpose of protecting personal property and lives from incidents, accidents, and threats such as terrorism, video surveillance equipment has been installed and operates in many places. Video surveillance technology has gradually developed into high-quality, high-definition equipment, and a lot of products have been launched. However, closed circuit television (CCTV) equipment for security purposes can invade a person's privacy. In this paper, we propose a way to protect personal video images using meta-data in an intelligent Internet protocol (IP) camera. We designed the system to mask personal video information from meta-data, define the method of image-information access according to user privileges, and show how to utilize the meta-data during storage and recorded data searches. The suggested system complies with guidelines for CCTV installation and operation from Korea's Ministry of the Interior. Installed on only a single server so far, due to the limitations and technical difficulties of hardware performance, it has been difficult to find a method that can be applied to personal image information using real-time protection techniques. Applying the method proposed in this paper can satisfy the guidelines, reduce server costs, and reduce system complexity.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.6
• /
• pp.44-56
• /
• 2019

Recently, the paradigm of SOC investment has shifted from new construction to maintenance. This shift became more important for the highway system because it is as one of the most important SOC. In Korea, highway maintenance costs are about 20% of the total annual highway construction budget, which is about two-thirds of developed countries. In addition, establishing standardized guidelines for the highway maintenance operation is not in place. Therefore, in order for domestic road construction and maintenance technology to secure competitiveness in the global construction market, it is urgent to improve the management capacity for maintenance as well as the technology and management capacity. This study examines highway maintenance practices in OECD countries such as North America, Europe, Australia, New Zealand, and Japan to identify core elements of highway maintenance practice. It is imperative to establish a comprehensive management system based upon asset management principle. Even if the budget for the highway construction is reduced, investment in maintenance needs to be maintained.

• Journal of Environmental Impact Assessment
• /
• v.28 no.3
• /
• pp.312-331
• /
• 2019

An offshore waste disposal facility refers to a landfill site for final landfilling of stabilized inorganic solid waste such as land and marine waste incineration materials, and the aim of such a facility is to solve the problem of insufficient waste disposal space on land and create and develop environmentally friendly marine spaces. The purpose of this study is to prepare guidelines for the construction of offshore waste disposal facilities, which reflect the need and importance of paying sufficient heed to environmental considerations from the initial stage of the project, in order to investigate, predict, and assess how such guidelines will affect the marine environment in relation to the construction of offshore waste disposal facilities, with the goal of minimizing the impact on and damage to the environment. For the purpose of this research, guidelines focusing on the construction of offshore waste disposal facilities were derived through an analysis of domestic cases and similar foreign cases and an assessment of their level of compliance with existing EIA guidelines through the operation of a discussion forum. In order to review the EIA report on similar cases in Korea, 17 EIA documents (2005~2016) for dredged soil dumping areas and ash ponds of thermal power plants were analyzed to investigate the status of marine organisms, marine physics, marine water quality, and marine sediment and to understand what types of problems can occur and what improvement measures can be taken. The purpose of these guidelines were to minimize damage to the marine environment by promoting EIA protocols in accordance with scientific and systematic procedures, to reduce the consultation period related to projects, to resolve social conflicts, and to reduce economic costs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.96-110
• /
• 2018

As the development of ICT has made it easier to collect various traffic information, research on creating new traffic attributes is drawing attention. Estimation and forecasts of demand and traffic volume are one of the main indicators that are essential to traffic operation, assuming that the traffic pattern at a particular node or link is repeated. Traditionally, a survey method was used to demonstrate this similarity on trip behavior. However, the method was limited to achieving high accuracy with high costs and responses that relied on the respondents' memory. Recently, as traffic data has become easier to gather through ETC system, smart card, studies are performed to identify the regularity of trip in various ways. In, this study, route-level trip data collected in Daegu metropolitan city were analyzed to confirm that individual traveler forms a spatially similar trip chain over several days. For this purpose, we newly define the concept of spatial trip regularity and assess the spatial difference between daily trip chains using the sequence alignment algorithm, Dynamic Time Warping. In addition, we will discuss the applications as the indicators of fixed traffic demand and transportation services.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.100-109
• /
• 2019

Maintainability indicates the extent to which maintenance can be done easily and quickly. The consideration of maintainability is crucial to reduce the operation and support costs of weapon systems, but if the maintainability is evaluated after the prototype production is done and necessitates design changes, it may increase the cost and delay the schedule. The evaluation should verify whether maintenance work can be performed, and support the designers in developing a design to improve maintainability. In previous studies, the maintainability index was calculated using the graph theory at the early design phase, but evaluation accuracy appeared to be limited. Analyzing the methods of evaluating the maintainability using fuzzy logic and 3D modeling indicate that the design of a system with good maintainability should be done in an integrated manner during the whole system life cycle. This paper proposes a method to evaluate maintainability using SysML-based modeling and simulation technique and fuzzy logic. The physical design structure with maintainability attributes was modeled using SysML 'bdd' diagram, and the maintainability was represented by an AHP matrix for maintainability attributes. We then calculated the maintainability using AHP-based weighting calculation and fuzzy logic through the use of SysML 'par' diagram that incorporated MATLAB. The proposed maintainability model can be managed efficiently and consistently, and the state of system design and maintainability can be analyzed quantitatively, thereby improving design by early identifying the items with low maintainability.

• Convergence Security Journal
• /
• v.21 no.1
• /
• pp.177-189
• /
• 2021

Defense R&D is a key process for securing weapons systems determined by mid- and long-term needs to cope with changing future battlefield environments. In particular, the test and evaluation provides information necessary to determine whether or not to switch to mass production as the last gateway to research and development of weapons systems and plays an important role in ensuring performance linked to the life cycle of weapons systems. Meanwhile, if you look at the recent changes in the operational environment of the Korean Peninsula and the defense acquisition environment, you can see three main characteristics. First of all, continuous safety accidents occurred during the operation of the weapon system, which increased social interest in the safety of combatants, and the efficient execution of the limited defense budget is required as acquisition costs increase. In addition, strategic approaches are needed to respond to future battlefield environments such as robots, autonomous weapons systems (RAS), and cyber security test and evaluation. Therefore, in this study, we would like to present strategies for improving the testing and evaluation of weapons systems by considering the characteristics of the security environment that has changed recently. To this end, the improvement strategy was derived by analyzing the complementary elements of the current weapon system operational test and evaluation system in a multi-dimensional model and prioritized through the hierarchical analysis method (AHP).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.441-447
• /
• 2021

Construction sites are complex and dangerous because heavy equipment and workers perform various operations simultaneously within limited working areas. Solitary works of heavy equipment in complex job sites can cause fatal accidents, and thus they should interact with spotters and obtain information about surrounding environments during operations. Recently, many computer vision technologies have been developed to automatically monitor construction equipment and detect their interactions with other resources. However, previous methods did not take into account the interactions between equipment and spotters, which is crucial for identifying solitary works of heavy equipment. To address the drawback, this research develops a computer vision-based solitary work detection model that considers interactive operations between heavy equipment and spotters. To validate the proposed model, the research team performed experiments using image data collected from actual construction sites. The results showed that the model was able to detect workers and equipment with 83.4 % accuracy, classify workers and spotters with 84.2 % accuracy, and analyze the equipment-to-spotter interactions with 95.1 % accuracy. The findings of this study can be used to automate manual operation monitoring of heavy equipment and reduce the time and costs required for on-site safety management.