• Journal of Preventive Medicine and Public Health
• /
• v.9 no.1
• /
• pp.1-10
• /
• 1976

This study was conducted in order to observe some descriptive epidemiological findings and causes of life-long labour force loss in the rural population of Korea, and to consider, on the basis of these observations, some principles of the necessary control measures. The total number of subjects in the study was 27,172, all family members of 4,174 households. The study population was located in the 81 counties, out of a total of 138 counties, where the college students conducted service activities during the summer of 1974. In each village area where these service activities were conducted, one household per student interviewer was randomly selected. Student interviewers were instructed on the contents of the questionnaire prior to the survey. The main contents of the questionnaire form included address, name, sex and age of each family members, and present life-long labour force loss, if any, of each family member. In cases of current labour force loss, the age of onset and causes were recorded. Of the total households surveyed, 8.9% had family members (1-4 in number) with life-long labour force loss. Of the total persons surveyed, the crude prevalence rate for life-long labour force loss was 15.1 per 1,000; and the age-standardized prevalence rates for male and female were 16.3 per 1,000 and 13.4 per 1,000, respectively. The rates, in both sexes, were gradually increased as the ages were increased. The prevalence rates per 1,000, in order, for life-long labour force loss by the causes were 10.2 for senility, 2.4 for impairment of extremities, 1.2 for chronic diseases of internal organs, 0.5 for other conditions of muosculoskeletal system, 0.4 for blindness in both eyes, 0.2 for impairment of spine, 0.2 for psychoses, and 0.1 for epilepsy. Among them the causes of impairment of extremities were stroke, poliomyelitis, accidents, arthritis and injury due to war operation, in that order of higher relative frequency. The frequency ratios by age of onset were also observed by the causes and sex.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.1
• /
• pp.33-66
• /
• 2014

While the numbers of overseas travelers has been increased rapidly each year, the numbers of passengers in the aircraft also has continued to be increased gradually. In the mist of these increasing numbers, such accidents as threatening an aircraft safety like riot, aircraft hijacking and terrorism have happened constantly. In these circumstances, South Korean government has prescribed "Aviation on Security Act" in accordance with the Convention on International Civil Aviation and other international agreements. This act aims to prevent illegal activities and illegal items on the aircraft to ensure the safety and security of civil aviation. However, this act is not sufficiently regulating all the illegal crimes and illegal items on the flight. For the worse, there is a lack of effective supervisory capacity. Likewise, the inherent problems of the current laws relating to the prevention of the illegal items on the aircraft are appearing on the surface continually. Above all, illegal items on the aircraft are directly connected to the issue of aviation safety and security as well as a safe utilization of the flight service. Thus, when there occurs a serious accident on board, it surely would be led to a huge economic loss not mentioning the loss of lives following the accident. Therefore safety of the flight passengers cannot be guaranteed without ensuring the safety of aircraft facilities and good supervisory mechanism of illegal items on the aircraft. Accordingly, establishing a safe operation order tends to influence economy and tourism of a country in no small measure. Therefore, it is an urgent issue to settle down a reasonable and adequate supervisory regulations regarding the prevention of the illegal items on the aircraft. Consequently, in this article, I studied on a reasonal and effective mechanism to control the prevention of the illegal items and illegal acts on the aircraft in order to ensure a safety and security of civil aircraft.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.120-128
• /
• 2018

The purpose of this study is to establish basic data for the continuous protection management policy of domestic natural world heritage and mixed world heritage, and to examine the present situation and characteristics of the protection management according to the World Heritage Convention on the World Heritage listed Huangshan. The results of this study are as follows. First, Huangshan began to be protected by the establishment of the Huangshan Construction Committee in 1933, and after the designation of national park in 1982, laws and regulations were established in the central ministries, And various projects related to utilization have been implemented. Secondly, the establishment of the boundary for protection was actively intervened by the central government, such as the reorganization of the boundary of Huangshan through the administrative district plan. In order to protect the ecological and landscape value as well as the cultural factor, And designated a heritage designated area. Third, the protection management of Huangshan was divided into four major stages. The first phase was divided into the period when administrative measures were taken to manage the protection of Huangshan. The second phase was designated as a national park in Huangshan. The third period was the time of the protection-oriented project according to the recommendation of the international organizations after the World Heritage listed. The fourth period was the expansion of the tourism industry for the continuous use of protection of Huangshan city, My preservation business was being implemented. Fourth, Huangshan is managed by the central government and the city government. Huangshan, which is a mixed heritage, is managed jointly by the Ministry of Cultural Heritage Administration and the Ministry of Natural Heritage Administration. The protection and management of Huangshan promoted the efficiency and expertise of the heritage-related work through the establishment of the administrative unit-specific management system, and the local governments were entrusted with the authority to implement the protection management policies that meet local characteristics. Fifth, the preservation area of Huangshan has been destroyed by the development policy centered on the mountain. In addition, according to the operation of accommodation facilities, there are problems such as sewage, garbage disposal, and environmental pollution caused by tourists, and the damage caused by pests and diseases in planted plantations around the area and changes in ecosystem due to the composition of cable cars. Sixth, for the continuous protection of Huangshan, strict regulations on new construction, extension and management of accommodation are required, and it is necessary to install facilities to limit and control the number of visitors.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.51-57
• /
• 2009

Biofouling in seawater reverse osmosis (SWRO) desalination process causes many problems such as flux decline, biodegradation of membrane, increased cleaning time, and increased energy consumption and operational cost. Therefore biofouling is considered as the most critical problem in system operation. To control biofouling in early stage, detection of the most problematic bacteria causing biofouling is required. In this study, six model bacteria were chosen; Bacillus sp., Flavobacterium sp., Mycobacterium sp., Pseudomonas aeruginosa, Pseudomonas fluorescens, and Rhodobacter sp. based on report in the literature and phylogenetic analysis of seawater intake and fouled RO membrane. The adhesion to RO membrane, the high pressure resistance, and the hydrophobicity of the six model bacteria were examined to find out their fouling potential. Rhodobacter sp. and Mycobacterium sp. were found to attach very well to RO membrane surface compared to others used in this study. The test of hydrophobicity revealed that the bacteria which have high hydrophobicity or similar contact angle with RO membrane ($63^{\circ}$ of contact angle) easily attached to RO membrane surface. P. aeruginosa which is highly hydrophilic ($23.07^{\circ}$ of contact angle) showed the least adhesion characteristic among six model bacteria. After applying a pressure of 800 psi to the sample, Rhodobacter sp. was found to show the highest reduction rate; with 59-73% of the cells removed from the membrane under pressure. P. fluorescens on the other hand analyzed as the most pressure resistant bacteria among six model bacteria. The difference between reduction rates using direct counting and plate counting indicates that the viability of each model bacteria was affected significantly from the high pressure. Most cells subjected to high pressure were unable to form colonies even thought they maintained their structural integrity.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.183-193
• /
• 2018

Currently, the Korea Atomic Energy Research Institute (KAERI) is planning to build the Ki-Jang Research Reactor (KJRR) in Ki-Jang, Busan. It is important to safely dispose of low-level radioactive waste from the operation of the reactor. The most efficient way to treat radioactive waste is cement solidification. For a radioactive waste disposal facility, cement solidification is performed based on specific waste acceptance criteria such as compressive strength, free-standing water, immersion and leaching tests. Above all, the leaching test is important to final disposal. The leakage of radioactive waste such as $^{137}Cs$ causes not only regional problems but also serious global ones. The cement solidification method is simple, and cheaper than other solidification methods, but has a lower leaching resistance. Thus, this study was focused on the development of cement solidification for an enhancement of cesium leaching resistance. We used Zeolite and Loess to improve the cesium leaching resistance of KJRR cement solidification containing simulated KJRR liquid waste. Based on an SEM-EDS spectrum analysis, we confirmed that Zeolite and Loess successfully isolated KJRR cement solidification. A leaching test was carried out according to the ANS 16.1 test method. The ANS 16.1 test is performed to analyze cesium ion concentration in leachate of KJRR cement for 90 days. Thus, a leaching test was carried out using simulated KJRR liquid waste containing $3000mg{\cdot}L^{-1}$ of cesium for 90 days. KJRR cement solidification with Zeolite and Loess led to cesium leaching resistance values that were 27.90% and 21.08% higher than the control values. In addition, in several tests such as free-standing water, compressive strength, immersion, and leaching tests, all KJRR cement solidification met the waste acceptance or satisfied the waste acceptance criteria for final disposal.

• Journal of radiological science and technology
• /
• v.28 no.1
• /
• pp.33-44
• /
• 2005

The objective of this study is to supply the good quality of experts the radiation industries in Korea and develop the major subject matter needed in the radiation industries and the curriculum in order to execute it for the variation of fields of employment at the department of radiation in the junior college and the development of the percentage of employment. In addition, this study is to improve the level of radiation experts engaged in the industries in quality, and it is to improve the social recognition of radiation rather negative now because of the development of radiation industry. As for the core results of this research, it was to suggest the detailed choice method curriculum proper to the service fields of radiation industries, but it may be subject to change due to each college's property and the educational objectives. From the result of this research above, it may be summed up as follows. First, as for the detailed curriculum by the service field, this study was to organize two subject matters: 1. the subject matter proper to the field of using the radiation, and 2. the subject matters proper to the safety control field of radiation. Second, as for the detailed curriculum by the pattern of industries, this study was to organize the four subject matters: 1. the subject matter needed in the manufactures, 2. the subject matter needed in the nondestructive testing industries, 3. the subject matter needed in the sales agencies, and 4. the subject matter needed in the laboratories. This study was to suggest the operational model about the curriculum in order to execute these subject matters. It could be executed as two methods below. First, one method is to execute the major systems by the medical field and industrial field in the third course at the department of radiation in the junior college now. Second, the other method is to make them specialize the industrial radiation in the Advanced Course(one year course) after the graduation of junior college. To operate these curricula successively it needs to assume the deeper research and the development of materials about the subject matters related to the nuclear radiation industries hereafter. In addition, it needs to solve the security of finance like the manpower of professor, space for practice, and the educational appliances, etc. needed in the operation of subject matters. Finally, the effect and result from the development or revision of college curriculum did not come out in a short time. It will require considerable time until the undergraduates at the department in the junior college finish a set of curriculum newly developed, and graduate the university, and can get the results while they engage in their works in the industrial sites. Accordingly, all the interested parties have to anticipate the results of this research with the patience in long-standing point of view. Also, this researcher considers it as it is willing to give them the continuous interest and support.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.33-43
• /
• 2007

Because usually signal controllers on the crosswalks of mid-block provide pedestrian signals every cycle based on the fixed signal plan, pedestrian signals are provided even when there is no pedestrian demand. Consequently, signal is operated inefficiently and this may cause drivels to experience useless delay or violate the signal. Even though recently pushbuttons have been installed to improve the efficiency of pedestrian signal control in the crosswalks of mid-block and the pedestrian safety. they are not spread out national-wide in Korea because of the cost of the pushbutton equipments and the lack of an acknowledgement of the efficiency of the pushbutton. In this study, the effectiveness of the pushbutton on saving the vehicle delay was verified through before and after study in 4 study sites using a traffic micro-simulation model, VISSIM. To evaluate the viability of the pushbutton, a benefit/cost analysis was also performed for 4 study sites. It was found that B/C ratio of all of 4 study sites was greater than 1. The sensitivity analysis for the traffic volume and pedestrian volume were performed to identify the impact of the both volume on the operation of pushbutton. And, a benefit/cost analysis was performed for all scenarios. It was found that when the pedestrian volume is greater than 90ped/h, the pedestrian signal was operated same as the fixed signal plan. That is, there is no benefit of pushbutton at all once the pedestrian volume is greater than 90ped/h. When the pedestrian volume is equal to or less than 90ped/h and the traffic volume is greater than 2,500veh/h, B/C ratio is greater than 1. Also it was found that as traffic volume increases and pedestrian volume decreases, the benefit increases. In this study, the criteria for installation of pushbutton on the crosswalks of mid-block are developed through the sensitivity analysis and benefit/cost analysis. The results of this study may be used as a criteria for expansion of pushbutton system.

• Korean Security Journal
• /
• no.29
• /
• pp.163-191
• /
• 2011

Recently, the problems in school violence did not stop on the crime between the members at the school and which developed into the invasion crime of the school caused by outsiders. The school is no more the safety zone from the crime. Particularly, in the case of the elementary school, because there are nearly no people who oppose to the outside attacker and can control this, it is the place where it is vulnerable to the invasion crime. The Metropolis of Seoul implements the School Sheriff system within the jurisdiction bureau, in the public elementary school. However, actually the School Sheriff business is being managed, never applying a rule in the Security Industry Law with the main content, that is the Security Industry Law application is excluded. Because the jurisdiction on the contract of Seoul City and operating company are run, the various issues is caused. First, since it is not being considered as a security business, the commercial liability insurance for security company has no chance to applicate when the operation company and the School Sheriff have related damage generation. So the security for the indemnification of loss of the victim is weak. Second, The task of the School Sheriff is ruled just by in the individual contracts. But it is insufficient with this thing. The related duties are required some supplement like a general rule application including the obligation of the guard in the security industry law. Third, the education of the School Sheriff needs to connect with the educational programme in the security industry law. The related professional education specially needed for the prevention of school violence ought to be reserved compensation. Forth, the citizens still demand the strengthening of police patrol for the surroundings of a school in spite of the result of Seoul City's public survey. Therefore, the active relation of cooperation with the police needs to be supported legally and institutionally with the Security Industry Law application. Fifthly, the success of the School Sheriff business can be more guaranteed with the supervision of the legal and institutional device like a the Security Industry Law application or police and all sorts of administrative execution's and etc.

• Journal of Chest Surgery
• /
• v.19 no.1
• /
• pp.35-42
• /
• 1986

Prevention of thrombombolism after rosthetic cardiac valve replacement is essential for the patients. About 90% of patients are free of major and minor thromboembolic complications 5 year after replacement of cardiac valves with prosthetic devices when they are under control of anticoagulant therapy. Ticlopidine is a drug that alter platelet function to have an antithrombotic effect. It is an antiaggregating agent which inhibits primary platelet function to have an antithrombotic effect. It is an antiaggregating agent which inhibits primary platelet aggregation induced by ADP and increases the production of prostaglandin $D_{2}$. Aspirin in small doses inhibits platelet synthesis of prostaglandins by irreversibly blocking the enzyme cyclo-oxygenase. Platelet secretion and aggregation are impaired with Ticlopidine and Aspirin. the thromboembolic event sof 54 patient s who were treated with Ticlopidine and Aspirin after cardiac valve replacement were evaluated and compared with that of 79 patients who were treated with Wafarin and Aspirin after the same type of operation. The follow-up period ranged from 4 to 110 months (mean of 48 months). there were 11 major thromboembolic episodes including three deaths in the warfarin goup during mean follow-up period of 56 months. two cases of CVA and one hemoarthrosis were noted due to overdose of Warfarin. Inticlopidine group, there was only one fatal thromboembolic epdisode three month after mitral valve replacement during mean follow-up period of 18 months. Two episodes of hypermenorrhea resulting anemia ere noted in the ticlopidine group. We measured the parameters of platelet function in aggreagation curve of platelet with platelet aggregometer (chrono-log Aggregometer, Model No. 430) Aggregation test was performed with three final concentrations of epinephrine in 10 uM/L, ADP in 5uM/L. 28 patients with prosthetic cardiac valves and 35 healthy volunteers were subgrouped as follows to analyze the effect of antithrombotic drugs used. Group I ; 11 patients treated with 250-500 mg of ticlopidine and 0.5gm of Aspirin as a daily single dose after cardiac valve replacement (14 St. Jude Medical and 1 Carpentier-Edwards, 9 patients with atrial fibrillation among them) Group II ; 10 patients treated with 3-5 mg of Warfarin and 0.75 gm of Aspirin daily to prolong prothrombin time around 20 seconds for more than 6 months and single Aspirin dose was maintained afterward as a life-long regimes(3 St. Jude Medical, 1 Hall-Kaster and 7 Carpentier-Edwards valve, 9 patients in atrial fibrilation). Group III ; 7 patients who quit anticoagulant treatment (Warfarin + Aspirin) 6-12 months after the regime as group II (3 St. Jude Medical. 1 bjork-Shiley, 1 Hall-Kaster, 3 Carpentier-Edwards valve, 2 of them are with atrial fibrillation). Group IV ; 35 healthy vounteers (28 males and 7 females). The following results were obtained. 1. The mean maximal platelet aggregability in Group I induced by 10uM/L epinephrine was 15.6%, and 17.5 and 18.7% in BM in proportion to the induction by 5 and 10 uM/L ADP. 2. The mean maximal platelet aggregability in Group II induced by 10uM/L epinephrine was 16.5%, and 27.4 and 44.7% in BM in proportion to the induction by 5 and 10uM/L ADP. 3. The mean maximal platelet aggregability in group III induced by 10uM/L epinephrine was 65%, and 56.5 and 51.8% in BM in proportion to the induction by 5 and 10 uM/L ADP. 4. The mean maximal platelet aggregability in the normal subjects induced by 10 uM/L epinephrine was 64%, and 65 and 69% in Bm inproportion to the induction by 5 and 10 uM/L ADP. 5. Reversible change of platelet aggregation curve induced by 5 and 10uM/L was noted all of the patients in Group I. conclusion : Ticlopidine is an antiaggregating agent which inhibits primary platelet aggregation induced by ADP, and increases the production of prostaglandin $D_{2}$. Ticlopidine and Aspirin produced a significant inhibition of platelet in the presence of ADP and epinephrine in our study. Acccording to our brief experience, 250 mg of ticlopidine and low dose of Aspirin resulted synergistic superior effect to each drug alone in prevention of thromboembolism after prosthetic cardiac valve replacement.