• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.243-248
• /
• 2007

The durability of a cylinder head is influenced by the thermal and mechanical history during the manufacturing process, as well as engine operation. In order to improve the durability of cylinder head, both load from engine operation and the preload conditions from the manufacturing process must be considered. The aluminum cylinder head used for a HSDI diesel engine is investigated to reduce the possibility of high cycle fatigue crack in this study. FE analysis is performed to elucidate the mechanism of high cycle fatigue crack in the HSDI diesel cylinder head. Two separate approaches to increase the durability of the cylinder head are discussed: reducing load from engine operation and re-arranging preload conditions from the manufacturing process at the critical location of the cylinder head. Local design changes of the cylinder head and modification of pretension load in the cylinder head bolt were investigated using FE analysis to relieve load at the critical location during engine operation. Residual stress formed at the critical location during the manufacturing process is measured and heat treatment parameters are changed to re-arrange the distribution of residual stress. Results of FE analysis and experiments showed that thorough consideration of the manufacturing process is necessary to enhance the durability of the cylinder head.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.1
• /
• pp.40-48
• /
• 2019

Hybrid electric propulsion systems (H-EPSs) are an intermediate step for integrated full electric propulsion warships. H-EPSs are a dynamic combination of mechanical and electrical propulsion systems to achieve the required mission performances. The system modes could adapt to meet the requirement of the various operation conditions of a warship. This paper presents a configuration and operating modes of H-EPSs considering the operation conditions of a destroyer class warship. The system has three propulsion modes, namely, motoring mode, generating mode [power take off (PTO) mode], and mechanical mode. The PTO mode requires a careful fuel efficiency analysis because the fuel consumption rate of propulsion engines may be low compared with the generator's engines depending on the loading power. Therefore, the calculation of fuel consumption according to the operating modes is performed in this study. Although the economics of the PTO mode depends on system cases, it has an advantage in that it ensures the reliability of electric power in case of blackout or minimum generator operation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.3
• /
• pp.149-155
• /
• 2021

Most of the reformer experiments have been conducted only in high-temperature operation conditions above 700℃. However, to design high efficiency solid oxide fuel cell, it is necessary to test actual reaction performance in mid-temperature (550℃) operation areas. In order to study the operation characteristics and performance of commercial reforming catalysts, a reforming performance experiment was conducted on mid-temperature. The catalysts used in this study are Ni-based FCR-4 and Ru-based RuA, RuAL. Experiments were conducted with a Steam-to-carbon ratio of 2.0 to 3.0 under gas hourly space velocity (GHSV) 2,000 to 5,000 hr-1. As a result, RuA and RuAL catalysts showed similar gas composition to the equilibrium regardless of the reforming temperature. However, the FCR-4 catalyst showed a lower hydrogen yield compared to the equilibrium under high GHSV conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.805-807
• /
• 2004

Dual Mode technology has been developed as a new technology that allows to use a self-emissive display under full sunlight conditions. The new technology connects a LCD-like remissive operation mode in sunlight to an OLED-like self-emissive operation in the dark In the recent years, the focus of development has shifted towards the possibility of full colour operation.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.8
• /
• pp.585-592
• /
• 1989

This paper presents an efficient algorithm for the reactive planning of transmission network under normal operating conditions. The optimal operation of a power system is a prerequisite to obtain the optimal investment planning. The operation problem is decomposed into a P-optimization module and a Q-optimization module, but both modules use the same objective function of generation cost. In the investment problem, a new variable decomposition technique is adopted which can operate the operation and the investment variables. The optimization problem is solved by using the gradient projection method (GPM).

• The KSFM Journal of Fluid Machinery
• /
• v.9 no.6 s.39
• /
• pp.22-28
• /
• 2006

Operation of a microturbine was simulated on the basis of component characteristic parameters obtained from performance test. Characteristic parameters, such as compressor and turbine efficiencies, recuperator effectiveness as well as turbine inlet temperature, were obtained for a wide operation range. Component characteristics including performance maps and characteristic curves were generated using measured data. Based on the component characteristics, a simulation program was constructed and operation of the microturbine was simulated, and the simulated results were compared with the measured data to verify the program. Also, influence of variation in the power control scheme on the operating characteristic and performance of the engine was simulated. The simulation program can be used for predicting operation of both healthy and degraded engine conditions.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.781-790
• /
• 2005

Granular Activated Carbon(GAC) is widely used in drinking water treatment. Many of the problems occurring in the GAC process are associated with the operation goal and performance. The purpose of this study were to evaluate the design, operation, and performance of granular activated carbon process in D water treatment plant. The optimal operation conditions of GAC process such as backwashing condition, granular activated carbon replacement time were discussed. The design, operation and performance of GAC process is influenced by their raw water characteristics and placement within the treatment process sequence. A critical analysis of plants experience and the information from the literature identifies the effectiveness of GAC process and indicates where modifications in design and operation could lead to improved performance. It would be useful to evaluate and optimize the GAC process in other treatment plant.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.246-254
• /
• 2010

This paper presents a multiagent system for microgrid operation in the grid-interconnected mode. An energy market environment with generation competition is adopted for microgrid operation in order to guarantee autonomous participation and meet the requirements of participants in the microgrid. The modified Contract Net Protocol (CNP) is used as a protocol for interactions among agents. The multiagent system for microgrid operation based on the modified CNP and the energy market environment is designed and implemented. To verify the feasibility of the suggested multiagent system, experiments on three operation conditions are carried out.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.634-643
• /
• 2020

Because of the continuous increase in the demand for and importance of marine space, marine exploration and survey activities are being actively conducted in Korea actively. Because the marine survey vessels used for these activities have special operational patterns depending on the purpose and probe vessels, research on maritime traffic risk is required. In this study, an attempt was made to determine the correlation of each factor with the effect of marine exploration and survey vessel operation on maritime traffic. The status of ocean exploration and survey vessels in operation in Korea was identified, as well as the special operational conditions of some of the ocean physical probes. Generally, the number of exploration and survey vessels involved per hour, total vessel length(including exploration equipment), operation, interval distance of exploration as per plan, and marine traffic conditions(traffic volume and speed) can be classified as operating factors. To compare the results of the environmental stress, a maritime traffic flow simulation based on the "ES" Model was performed with each of the identified operating factors as independent variables. The results of the analysis confirmed that the environmental stress significantly changed in the order of traffic volume, ship length and speed. In addition, it was confirmed that the environmental stress is reduced when the operation course is set at an angle with the nearby maritime traffic flow. Accordingly, it can help reduce the operator's burden if the survey vessel operator understands nearby maritime traffic conditions and reflects them in the operation method when setting the operation plan.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.131-142
• /
• 2005

Punctuality of bus operation can be defined as "timely operation of buses according to their operation schedules." It tis often considered as one of the important measures of bus operation reliability in evaluating bus operation performance from the viewpoint of bus users. Passenger waiting times are severely influenced by the punctuality of bus operations. However, there exist many situations that predetermined schedules cannot be met. In these cases, other definitions of punctuality should be given. This paper is to develop punctuality indexes of bus operation based on various bus operating situations. Bus operation data sampled from Seoul bus system were analyzed to calculate punctuality indexes for a number of bus routes. Then, bus operation punctuality was characterized by various operating conditions. Several interesting results were obtained and explained.