• 설비공학논문집
• /
• 제14권3호
• /
• pp.191-198
• /
• 2002

Cooling tower design procedure was set up using conventional Merkel theory, The design data could be different depending on the characteristic curve that the engineer chose. It reveals that the consistent and reasonable criteria are required based on the exact information of the cooling tower Performance. In this study, an off-design performance analysis program for a counterflow-type cooling tower was developed and verified by comparing with experimental data. Also, the off-design performance with various operating conditions was analyzed.

• 대한후두음성언어의학회지
• /
• 제14권1호
• /
• pp.10-15
• /
• 2003

Background and Objectives : Ankyloglossia, commonly known as tongue-tie, is the result of a short, fibrous lingual frenulum or highly attached geioglossus muscle. This condition may cause sucking and swallowing problems, articulation disorders, interference with the tongue's cleansing action, increased the potential for caries, and inability to lick the lips, play a wind instrument, and 'french kiss' Treatment is surgical procedure. In the most cases, horizontal sectioning and mucosal suture(the conventional procedure) is preferred, but in some cases, the Z-plastic procedure is effective. This study is aimed to compare the result of the two procedures. Materials and Methods : Twenty tongue-tie patients underwent operation. Ten patients were treated with the Z-plastic procedure and ten patients were treated with the conventional method randomly. We checked preoperative mobile tongue length, postoperative mobile tongue length, operation time and postoperative wound states. Results : Among the 20 cases of tongue-tie, 2 cases are excepted due to pre-operative state, thus we compared 18 cases of tongue-tie patients. There is no statistically significant difference between the two procedures except in operation time. The Z-plastic procedure apparently needs a little more operating time. Conclusion : Patients treated with the Z-plastic procedures appeared to have better outcomes, but the data shows no statistical significance except in operating time. Consequently, the Z-plastic procedure is indicated in a limited amount of cases.

• Industrial Engineering and Management Systems
• /
• 제15권3호
• /
• pp.231-238
• /
• 2016

Traditional acceptance sampling plans have focused on the proportion of nonconforming items as an attribute criterion for quality. In today's modern quality management under high quality production environments, the reduction of the deviation from a target value in a quality characteristic has become the most important purpose. In consequence, various inspection plans for the purpose of reducing the deviation from the target value in the quality characteristic have been investigated. In this case, a concept of the quality loss evaluated by the deviation from the target value has been accepted as the variable evaluation criterion of quality. Further, some quality measures based on the quality loss have been devised; e.g. the process loss and the process capability index. Then, as one of inspection plans based on the quality loss, the rigorous design procedure for the variable sampling plan having desired operating characteristics (VS-OC plan) indexed by the quality loss has been proposed by Yen and Chang in 2009. By the way, since the estimator of the quality loss obeys the non-central chi-square distribution, the rigorous design procedure for the VS-OC plan indexed by the quality loss is complicated. In particular, the rigorous design procedure for the VS-OC plan requires a large number of the repetitive and complicated numerical calculation about the non-central chi-square distribution. On the other hand, an approximate design procedure for the VS-OC plan has been proposed before the proposal of the above rigorous design procedure. The approximate design procedure for the VS-OC plan has been constructed by combining Patnaik approximation relating the non-central chi-square distribution to the central chi-square distribution and Wilson-Hilferty approximation relating the central chi-square distribution to the standard normal distribution. Then, the approximate design procedure has been devised as a convenient procedure without complicated and repetitive numerical calculations. In this study, through some comparisons between the rigorous and approximate design procedures, the applicability of the approximate design procedure has been confirmed.

• 한국도로학회논문집
• /
• 제10권2호
• /
• pp.57-67
• /
• 2008

현재 우리나라에서 도로 평면선형 설계를 위해 도로설계속도 개념을 사용하고 있다. 도로설계속도 개념은 단 한 개 도로 설계속도를 사용하기 때문에 도로 기하구조 수준이 일정해진다는 강점을 갖고 있으나, 도로 건설 후 그 도로를 주행하는 실제 차량 속도가 설계속도와 달리 나타날 수 있다는 약점을 갖고 있기도 하다. 본 연구에서는 이 약점을 보완하기 위해, 이미 여러 나라에서 사용 중인 주행속도 예측모형에 근거한 평면 선형설계기법을 제안한다. 본 연구에서는 이를 위해 우리나라 전역에서 표본을 선택하여 차량 속도조사를 수행했고, 속도에 영향을 미치는 도로설계요소를 통계분석을 통해 선정하여 양방향 2차로와 4차로 일반국도에 대한 차량 주행속도 모형을 제시했으며, 그 모형을 도로 평면선형설계에 적용하는 과정을 제시했다. 한편 새로운 기법에 대한 유효성을 밝히기 위한 실제 사례분석에서 새로운 기법은 기존 기법이 갖고 있는 약점을 해소하는 것으로 밝혀졌다. 향후 우리나라 도로 건설 사업에서 본 연구에서 제안한 평면선형 설계기법을 적용하면 도로 투자 효율성이 높아지고, 더 높은 설계일관성을 확보할 수 있을 것으로 판단한다.

• 대한치과의사협회지
• /
• 제55권8호
• /
• pp.556-564
• /
• 2017

Endodontic surgery is a procedure to treat apical periodontitis or abscess in cases that did not heal after nonsurgical treatment or retreatment. This might include situations with persistent intracanal infection after root canal treatment. Other reasons might be found in extraradicular infection, such as bacterial biofilm on the apical root surface or bacteria within the lesion. For many years, the treatment standard was the traditional approach with surgical burs and amalgam for root-end filling. Endodontic microsurgery is the most recent step in the evolution of endodontic surgery, applying not only ultrasonic tip and biocompatible filling materials but also incorporating high-power magnification and illumination. Although many studies have been published that advocate the use of modern technique, the traditional techniques are still widely used in the surgery community. The purpose of this study was to demonstrate the endodontic microsurgery procedure including the root-end preparation and filling with the use of a surgical operating microscope.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.71-74
• /
• 1996

The concept of uniformity in control implementation is exploded for improving efficiency of design procedure. A controller area operating system which includes real time kernel and control specific shell are developed. Three examples are discussed for the validation of tile system.

• Child Health Nursing Research
• /
• 제11권4호
• /
• pp.490-497
• /
• 2005

Purpose: The purpose of this study was to investigate the effect on pain of distraction with an operating doll in preschool children(3-6 years old) during an IV catheter insertion. Method: The research design was a nonequivalent control group posttest design, and the participants were 22 children in the experimental group, and 23 children in the control group. The children were hospitalized for enteritis and pharyngitis in a university hospital. The subjective pain was measured using FACES Pain Rating Scale by self report, and the pain behavior responses were scored using Procedure Behavior Check List by observing a film of the entire procedure, and changes in pulse and oxygen saturation as the physiological pain responses were measured by pulse oximeter. Data were analyzed with the SPSS Win 10.0 program. Result: The degree of subjective pain, pain behavior responses, and changes in pulse during IV catheter insertion were significantly lower in the experimental group. But there was no significant difference in $O_2$ saturation between the two groups. Conclusion: Distraction using an operating doll was effective in decreasing pain during inserting the IV catheter in preschool children.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.200-205
• /
• 2006

Subway widely used as a major mean of public transportation both at home and abroad contributes to ease chronic traffic congestion in cities. However, subway operating expense is expected to increase continuously because subway requires vast amount of money at the construction stage, huge sum of maintenance cost is spent during operation, and passenger needs for more convenient facilities is increasing. on the contrary to enormous operating expenses, fare that is occupying most of operating income doesn't come up to its prime cost causing chronic operating deficit. It is urgent to prepare fare system improvement measures to increase operating income in order to resolve financial difficulty of a subway operating organization. Therefore, the current study analyzed present condition and problems of subway fare system, and suggested improvement measures such as improvement of fare adjustment procedure, improvement of free-ride system, diversification of ticket, etc.

• 통합자연과학논문집
• /
• 제12권3호
• /
• pp.69-73
• /
• 2019

Taguchi has used the signal-to-noise ratio (SN) to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. Taguchi has dealt with having constraints on both the mean and variability of a characteristic (the dual response problem) by combining information on both mean and variability into an SN. Many Statisticians criticize the Taguchi techniques of analysis, particularly those based on the SN. In this paper we propose a substantially simpler optimization procedure for parameter design to solve the dual response problems without resorting to SN.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1148-1154
• /
• 2011

Vending machines to release single-use RF(Radio Frequency) transport cards at Seoul Metro stations are operated under unmanned facility and have release & charge function. This Paper introduces function, configuration of vending machine to release single-use RF transport cards, the basic concepts & overview about vending machine's operating system. And suggests programming procedure to develop OS image of Windows Embedded operating system which is onboard the main board's electronic circuitry.