• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.519-524
• /
• 2002

This paper presents a soft-switching technique of single-stage power conversion Matrix Converter of AC-AC converters. Conventional hard-switching method is limited to operate at low switching frequency due to increased switching loss. In this paper, by additional auxiliary switch circuits, it is shown that the main switch of the matrix converter operate as a zero-voltage switches, and the auxiliary switch operate as a zero current switch. Finally, the soft-switching technique with auxiliary switches is compared with conventional hard-switching technique, and Is analyzed by simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.59-60
• /
• 2013

In this paper, we implemented a digital doorlock using microprocessor Atemega128 made in Atmel. We added RFID reader to identify different existing Doorlock. To operate the system, first, if RFID reader recognize card, LCD is used to operate password input message. Second, if password is correct, door is opened. But if password is incorrect, door will not be open. To extend security intensity for opening door key, we used RFID module and can operate it easily.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2001.11a
• /
• pp.77-82
• /
• 2001

This paper is contents that measure the ventilation rates and temperature by driving condition of exhaust fan, vapor, contaminant occurrence amount of carbon dioxide etc. In kitchen of apartment house. The ventilation rates in the apartment kitchen measured by Tracer Gas Method. And, temperature of when cook by gas table hood lower part 10cm and floor upside 10cm of kitchen central part, 120cm, 210cm heights measure. As ventilation rates measurement result, ventilation number of times was 0.7(number of times/hour) when did not to operate exhaust fan. but we were measured by 2.3(number of times/hour) when drove strongly. As temperature measurement result at cooking by gas table, temperature showed highest in hood lower part 10cm of case that do not operate exhaust fan. Temperature at kitchen central was most low in 10cm height in talc floor, and 210cm were measured highest. Concentration of carbon dioxide is very high by 4,350ppm after measurement time 10 minutes in state who do not operate exhaust fan at cooking by gas table.

• The Journal of Korea Robotics Society
• /
• v.17 no.2
• /
• pp.216-220
• /
• 2022

This paper proposes an inspection robot that can operate on a single square rail. Various inspection robots have been developed to identify emergency situations in industrial environments, such as those involving fires or individuals with cardiac arrest. Because the robots must operate in wide areas and long tunnels, they are designed to move along a rail installed on the ceiling. Double rail track are typically used to ensure the stability of robot movement. However, the cost for installing a double rail track is nearly two times that for a single rail track. Moreover, it is challenging to install double rail tracks while ensuring the same curvature and interval between the two rails. Therefore, in this study, an inspection robot that operate on a single square rail track is developed. To ensure stable movement in the longitudinal and lateral directions, two passive guide parts are used, and the main active wheel is allowed to move on the upper side of the square rail. The prototype was manufactured, and experiments were performed for different robot velocities.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.222-229
• /
• 2022

Through this technology development, companies that operate online shopping malls and prospective startups will support education, consulting and expert group matching so that they can solve various issues that may arise in the course of the entire business life cycle, from startups to closures. It is expected that differentiated consulting programs will be designed for companies that currently operate shopping malls and start ups, and customized consulting programs will be provided to improve the effectiveness of consulting while improving customer satisfaction. It is planning to develop a "successful start-up and operation helper" that helps successful start-ups. It is a system that primarily diagnoses problems of prospective entrepreneurs and operators through an automation system at the start-up and operation stage, and professional consultants participate to derive and solve problems, and takes care of all stages of shopping mall birth and growth. In this paper Metaverse based shopping mall Creation is also discussed. Through Big Data creation these accumulated data, we intend to help operators start and operate shopping malls through accurate information by managing all knowledge of shopping malls as a system in the long run.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.1 s.63
• /
• pp.1-16
• /
• 2007

The incineration process has commonly used for wastes amount reduction and thermal treatments of pollutants as the technologies accumulated. However, the process is getting negative public images owing to matter of hazardous pollutants emission. Specially dioxins became a main issue and is mostly emitted from municipal solid wastes incineration. In this reason, pyrolysis/gasfication/melting process is presented as a alternative of incineration process. The pyrolysis/gasfication/melting process, a novel technology, is middle of verification of commercial plant and development of technologies in Korea. But the survey about the pollutant emission from the process, and background data in these facilities is necessary. So in this survey, it Is investigated that the behavior of dioxins in three pyrolysis/gasfication/melting plant (S, T, P) of pilot scale. In case of S plant, concentration of dioxins shows high at latter part of cogenerated boiler and stack which are operate on low temperature conditions than a latter parts of pyrolysis and melting furnace which are operate on high temperature condition. Concentration of gas phage dioxins had increased after combusted gas passed cogenerated boiler and this is attributed to react of precursor materials such as chlorobenzene and chlorophenol. Concentration of dioxins in T plant showed lower levels at latter part of cooling equipment which are operate with water spray type on low temperature conditions than a latter parts of gasfied melting furnace which are operate on high temperature condition. Removal efficiency of dioxins at gas treatment equipment was 78.8 %. Concentration of dioxins in P plant was low at latter part of SDA/BF which is operate at low temperature conditions than a latter parts of pyrolysis gasfied chamber which are operate at high temperature condition. Removal efficiency of dioxins of SDA/BF was 85.9 % and therefore, it showed high efficiency at those of stoker type incineration facility. However, concentration of dioxins which emitted at high temperature condition were low in three facilities and satisfied present standard emission level of dioxins. To consider the distribution ratio of dioxins, Particulate phase dioxins at S and P plants showed similar ratio with which shows in current stoker type for middle scale domestic waste incineration facility. It is necessary to continuos monitoring the ratio of distribution of dioxins in T plant in because ratio of gas phage dioxins showed high.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.3
• /
• pp.39-46
• /
• 1994

CMOS LCD driving circuits using poly-Si TFT have been designed and basic blocks including test patterns have been fabricated. Column driver drives the pixels by block because polu-Si TFT can not operate at the speed of video signal. Row driver has mode selection circuit which can select a mode between interlacing mode and non-interlacing mode. Experimental results show shift register can operate at 1MHz colck frequency with 4pF load.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.893-898
• /
• 2004

The hydraulic cylinder is used for actuating a sluice gate which controls the volume of water in the reservoir. Generally, the one cylinder type is used to operate the sluice gate. In order to reduce the required cylinder force to operate the sluice gate significantly, the sequentially operated-hydraulic cylinders type is designed and the optimal locating points of cylinders are searched using the complex method that is one kind of constrained direct search method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.675-680
• /
• 2002

This study was to operate a fitting production specific of concrete product for proper mixing discovery. Testing method was to operate slump, air content, compressive strength test. The standard was water-cement ratio 50% and weight substitution 0%, 10%, 20% by Fly-ash and using Silica-fume and HPMC(Hydroxy propyl methyl cellulos) by additive. The result of this study showed when add Fly-ash to Silica-Fume is better than HPMC.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.1060-1063
• /
• 2005

Growing qualitative and cost-based competition with the roads and air modes will be oblige the railways to make better use of their existing infrastructure than present. Development and use of new signalling and safety systems and introduction of wide-area control systems may make it possible to operate railway efficiently. Therefore. a comprehensive series of measures must be developed in the fields of technology, planning and management, measures which can operate today's korean railway systems intelligently and achieve cost savings, better quality services and improved results.