• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.32-39
• /
• 2012

With the aid of genetic algorithm (GA), global optimization with multiple geometry parameters is feasible in the design of switched flux permanent magnet (SFPM) machines. To investigate the advantages of global optimization over individual optimization, which has been used extensively for the design of SFPM machines, a comparison between the two approaches is carried out for the case of fixed copper loss and volume. In the case of individual parameter optimization, the sequence in which the individual parameters are optimized is very important. In the global optimization a better design can always be achieved although the corresponding torque density is found to be only slightly better than that of individually optimized with correct design sequence. By using the obtained global optimization results, the performance in machines having two types of stator and rotor pole combinations, i.e. 12/10 and 12/14, are compared, and it is shown that higher torque is exhibited in the 12/14 SFPM machine. Finally, this paper also demonstrates that global optimization, with the restriction of equal pole width, magnet thickness and slot opening, can maximize the torque density without significantly sacrificing other performance, such as cogging torque and overload capability.

• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.51-58
• /
• 2010

English vowels play an important role in the daily communication between Korean students and international visitors. However, many Korean students still have difficulty producing them distinctively. Vowels vary according to shapes of oral and pharyngeal cavities, which are mainly determined by the degree of jaw opening and tongue position. Yang (2008a) proposed a simplified chart of English and Korean vowels for an educational purpose. He also suggested to use wooden chopsticks to secure distinguishable jaw openings. The purpose of this study is to tap whether wooden chopsticks can be applicable to a method for correcting English vowel pronunciation. Twelve male and female students participated in the recordings of eight /hVd/ words followed by additional recordings with wooden chopsticks between upper and lower teeth. The first and second formant trajectories of both natural and controlled vowel productions were obtained and compared at six equidistant measurement points using Praat. Results showed that the formant values of natural vowel productions were comparable to those of controlled productions. Vowels with similar formant trajectories of male students were separated with the aid of chopsticks. The width of each chopstick could be controlled similarly in the experiment. The author concludes that wooden chopsticks can be useful to correct vowel pronunciation. Further studies are desirable for native speakers to make perceptual evaluations of controlled vowel productions by nonnative speakers.

• The Korean Journal of Physiology
• /
• 제11권2호
• /
• pp.67-71
• /
• 1977

This study was undertaken to investigate the effect of cingulate cortical ablation upon gastric secretion and its components in rats. 23 male rats were divided into the cingulate(N=9) and the operated control(N= 14) groups. Cingulate cortex was ablated through a slit-shaped opening(1 mm in width, 5 mm in length) which was made symmetrically on both sides of, and parallel to, the sagittal suture by removing a bone flap from frontal bone on each side. In the operated control group, the surgical procedure was ended by the removal of the bone flap. Under light ether anesthesia, experimental animals were placed in a restraining jacket of fine mesh wire and gastric juice was collected for 5 hours via a canula which had been inserted through the anterior abdominal wall into the antral portion of the lumen of the stomach. Volume of the gastric juice was measured, and total acid output and free acid output were titrated with 0.04 N NaOH solution by using phenolphthalein and Topfer's reagent at indicator, and chloride ion output was estimated by means of chloridometer. Results obtained were that volume, total acid output, free acid output and chloride ion output of the gastric juice were higher significantly in the cingulate group than in the operated control group. It is inferred from the above results that the cingulate cortex exerts a fascilitatory influence upon gastric secretion and acid output in rats.

• 대한가정학회지
• /
• 제39권11호
• /
• pp.1-14
• /
• 2001

In order to develop a manual of residential alterations for the physically disabled, this case study was accomplished to analyze and evaluate residential environments and residential alterations for physically disabled women. Twenty-nine physically disabled women in Seoul and Kyunggi areas were the subjects of this study. With the evaluation checklist on physical environments of their housing, data on general characteristics of wall, floor, and all features and equipments and spaces of bedroom, kitchen, bathroom, living mom, entrance and balcony were gathered. Also, data on residential alterations were gathered through personal interviews. The data were collected from July 18th to July 25th in 2000. Frequency, percentage, and mean were used to analyze the data. In kitchen, small space, hee space under the sink and heights of the lower cabinets were not properly provided. In bathroom, door width, direction of opening door, adjustable height of shower, level difference, clear space for wheelchair user, and storage place were not appropriate to the disabled. Kitchen and bathroom showed high frequencies of alteration. But most of the subjects were not satisfied with the alterations of their housing. They also wanted to alter these two spaces in the future. In order to after their housing effectively appropriate information of the residential alterations was needed. If a guide or manual book for residential alterations was provided, the physically disabled people will more easily after their housing for safe and independent life.

• 한국정보통신학회논문지
• /
• 제10권2호
• /
• pp.386-391
• /
• 2006

본 논문에서는 유니 플래너 급전구조를 갖는 V형 선형 테이퍼드 슬롯 안테나를 설계하였다. 설계에 사용한 유전체 기판은 두께가 0.762mm이고 비유전율이 3.0인 PTFE 기판이며 손실 탄젠트는 0.001이다. 또한 중심 주파수는 5.8GHz로 설계하였으며 급전선로의 실현은 Hammerstad에 의한 식을 사용 하였다. V-LTSA의 S11과 VSWR의 시뮬레이션 결과를 얻었으며 -10dB를 기준으로 할 때 대역폭은 약 4.3GHz이었고 VSWR은 약 1.8 Octave의 광대역 특성을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.59-61
• /
• 1995

This paper presents the cogging torque analysis of the permanent magnet type AC servo motor which have the closed slot structure. Generally, existence of the slot opening causes the cogging torque. But the cogging torque exists in this type motor(having closed slot structure) because the bridge part is saturated by the rotor flux. In this paper, the finite element analysis is used to calculate the cogging torque and the rated torque. As the size of the bridge part-the thickness and the width-changes, the cogging torque and the rated torque are obtained repeatedly like as upper procedures. Finally, the trends of the cogging torque and the rated torque versus the size of the bridge part are obtained from this analysis procedures. By this approach, the optimal geometry of the bridge part can be found which minimize the cogging torque satisfying the required value of the rated torque.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.30-34
• /
• 2021

Superconducting magnets have paved the way for opening new horizons in designing an electromagnet of a high field magnetic resonance imaging (MRI) device. In the first phase of the superconducting MRI magnet era, low-temperature superconductor (LTS) has played a key role in constructing the main magnet of an MRI device. The highest magnetic resonance (MR) field of 11.7 T was indeed reached using LTS, which is generated by the well-known Iseult project. However, as the limit of current carrying capacity and mechanical robustness under a high field environment is revealed, it is widely believed that commercial LTS wires would be challenging to manufacture a high field (>10 T) MRI magnet. As a result, high-temperature superconductor together with the conducting cooling approach has been spotlighted as a promising alternative to the conventional LTS. In 2020, the Korean government launched a national project to develop an HTS magnet for a high field MRI magnet as an extent of this interest. We have performed a design study of a 7 T 320 mm winding bore HTS MRI magnet, which may be the ultimate goal of this project. Thus, in this paper, design study results are provided. Electromagnetic design and analysis were performed considering the requirements of central magnetic field and spatial field uniformity.

• Steel and Composite Structures
• /
• 제46권3호
• /
• pp.353-366
• /
• 2023

This paper presents a finite-element analysis (FEA) of aluminum alloy rectangular hollow sections (RHSs) and square hollow sections (SHSs) with circular through-openings under three-point and four-point bending. First, a finite-element model (FEM) was developed and validated against the corresponding test results available in the literature. Next, using the validated FE models, a parametric study comprising 180 FE models was conducted. The cross-section width-to-thickness ratio (b/t) ranged from 2 to 5, the hole size ratio (d/h) ranged from 0.2 to 0.8 and the quantity of holes (n) ranged from 2 to 6, respectively. Third, results obtained from laboratory test and FEA were compared with current design strengths calculated in accordance with the North American Specifications (NAS), the modified direct strength method (DSM) and the modified Continuous strength method (CSM). The comparison shows that the modified CSM are conservative by 15% on average for aluminum alloy RHSs and SHSs with circular through-openings subject to bending. Finally, a new design equation is proposed based on the modified CSM after being validated with results obtained from laboratory test and FEA. The proposed design equation can provide accurate predictions of flexural capacities for aluminum alloy RHSs and SHSs with circular through-openings.

• 수산해양기술연구
• /
• 제39권1호
• /
• pp.33-43
• /
• 2003

본 연구는 현재 국내에서 사용되는 쌍끌이 중층망 어구어법에서 문제점으로 지적되고 있는 고속예망에서 망고의 제어가 어렵다는 점, 망목에 뜸이 걸려서 파망이 자주 일어나는 점, 네트드럼에 감기는 어구부피가 너무 크다는 점 등의 해결방법으로 무부자 쌍끌이 중층망의 모형실험을 통하여 우리 나라 쌍끌이 중층망에 대한 적용 가능성을 검토하는데 있다. 이를 위하여 850ps급 쌍끌이 기선저인망어선에서 현재 사용되는 실물망을 1/100로 축소 제작한 모형망에서 뜸을 모두 제거하고 끌줄을 양쪽으로 각각 두가닥으로 분리한 후 추를 부착하여 아래끌줄의 길이를 조절함으로써 망고를 제어할 수 있는 무부자 쌍끌이 중층망의 모형어구를 제작하여 회류수조에서 유속에 대한 아래끌줄의 길이에 따른 어구의 전개성능 등을 규명하고 기준형과 비교 분석한 결과를 요약하면 다음과 같다. 1. 유체저항은 무부자망이 기준형보다 약 10∼20%정도 작았으며, 무부자망의 유체저항은 동일유속에서 아래끌줄이 길어짐에 따라 약 1ton씩 증가하였다. 또, 동일유속에서 dL이 10m씩 증가함에 따라 아래끌줄에 작용하는 저항은 약 5%씩 감소하고, 그 반면에 윗 끌줄에 작용하는 저항이 증가하였다. 2. 망고는 직선에 가까운 지수함수적으로 감소하는 경향을 보였으며, 동일유속에서 아래끌줄이 길어짐에 따라 증가하여 로그함수적인 경향을 보였다. 또한, 망고감소율은 무부자망의 경우가 기준형보다 작게 나타났으며, 그 차이는 유속이 증가함에 따라 더욱 커져 dL이 30m인 무부자망을 기준으로 3.0knot일 때 12%, 4.0knot일 때 25%로 나타났다. 3. 망폭은 유속이 증가함에 따라 약 2m 내외로 거의 일정하였으며 무부자망이 기준형보다 크게 나타났다. 4. 망구면적은 유속이 증가함에 따라 지수함수적으로 감소하는 경향을 보였으며, 망구면적의 감소율은 기준형보다 무부자망이 더 작게 나타났다. 여과량은 유속이 증가함에 따라 로그함수적인 경향을 보였으며 기준형이 3.0knot 이상에서 급격히 감소하였지만, 무부자망은 4.0knot까지 증가하였다가 완만하게 감소하였다. 5. dL의 최대적정길이는 망구면적 및 여과량이 최대인 30m일 때이며, 추의 최적위치는 4개의 그물목줄이 연결되는 지점이었다.

• 자원환경지질
• /
• 제27권1호
• /
• pp.65-80
• /
• 1994

The Tertiary $Ch{\check{o}}ngja$ basin is located in the southeastern coastal area of the Korean Peninsula. It is a lozenge shaped fault-bounded basin with circa $5{\times}5km$ areal extent, isolated from other Tertiary basins by the Cretaceous Ulsan Formation in-between. The northwestern boundary of the basin is a domino/listric type normal fault trending $N30^{\circ}E$, whereas its southwestern boundary is a dextral strike-slip fault (trending $N20^{\circ}W$) with a lateral offset of more than 1 km. The basin is bounded by the East Sea on the eastern margin. Basin-fills consist of extrusive volcanic rock (Tangsa Andesites) of Early Miocene (16~22 Ma in radiometric age), unconsolidated fluviatile conglomerate (Kangdong Formation) and shallow brackish-water sandstone ($Sinhy{\check{o}}n$ Formation). The latter yields abundant Vicarya-Anadara molluscan fossils of early Middle Miocene age. The Tertiary strata become younger toward the northwestern boundary-fault of the basin, showing a zonal distribution pattern parallel to the fault: the younger sedimentary formations occupy a narrow zone of 2 km width along the northwestern boundary-fault, whereas the older Tangsa Andesites underlie them unconformably in the eastern and southeastern portions of the basin. The strata in the basin, including the Tangsa Andesites, are tilted (about $20^{\circ}$) toward the northwestern boundary-fault Sedimentary strata thicken toward the boundary-fault, forming a wedge shaped half-graben structure. A number of small-scale syndepositional normal growth faults and graben structures are observed in the sedimentary strata. These extensional structures have the same trend as the normal northwestern boundary-fault which we interpret as a pull-apart detachment fault. These characteristics imply persistent extension during the basin evolution, caused by a NW-SE directed tensional force. The $Ch{\check{o}}ngja$ basin is, thus, a kind of syndepositional tectonic basin evolved in a strike-slip (pull-apart) regime. The latter was caused by a dextral simple shear associated with the NNW-SSE opening of the East Sea. In view of the fact that the normal growth faults do not cut through the uppermost portion of the youngest $Sinhy{\check{o}}n$ Formation, it is inferred that the tensional force came to be inactive in the early Middle Miocene. This is coincident in timing with the termination of the East Sea opening (15 Ma).