• PNF and Movement
• /
• v.21 no.3
• /
• pp.273-280
• /
• 2023

Objective: In patients with temporomandibular joint disorders, air insoles are used to investigate functionality and pain changes in the temporomandibular joint when walking in daily life. Intervention: Sixty-five patients with temporomandibular joint disorder were recruited: 34 as a control group who walked more than 7,000 steps a day in daily life, and 31 as an experimental group who were instructed to take at least 7,000 steps every day while wearing their air insoles. Measurements: To determine the effects of air insoles on temporomandibular joint pain, steady-state pain, maximum mouth opening, average pain, and the most severe pain were measured before and after the experiment. In addition, to evaluate functionality, the ability to open the mouth in a comfortable state, pain when opening the mouth, and the point of sound and maximum degree to which the mouth could be opened were evaluated before and after the experiment. Results: Pain, mouth openness, and sound points showed significant differences from the control group after the experiment, and the maximum mouth opening range showed no significant difference. Conclusion: When air insoles were used by patients with temporomandibular joint disorder, the functionality of the temporomandibular joint was improved and pain was decreased.

• Journal of Environmental Science International
• /
• v.32 no.11
• /
• pp.789-800
• /
• 2023

A vascular flora survey was conducted in 2020 to identify flora and analyze changes in the numbers of vascular flora species over the past 10 years at Gongju-weir (GW) and Baekje-weir (BW) in the Geumgang River, Republic of Korea. A total of 241 taxa were found in GW and 279 taxa in BW, and 208 taxa (88% of total taxa) were common species. The distribution of invasive species in GW and BW were seven and eight taxa, respectively. Rare plants were not identified in any of the weirs. The Poaceae family dominated in terms of number of species, followed by Asteraceae, Legumes, Cyperaceae, and Polygonaceae. Additionally, Therophytes accounted for a high proportion of Raunkiaer life forms. The numbers of vascular plant species, total taxa, naturalized plants, and invasive species have been increasing over the last 10 years. However, long-term alterations in invasive species before and after the opening of the weirs increased much more significantly in the partially opened BW than in the fully opened GW. These results indicate that the degree of barrier opening does not affect the invasion and establishment of non-native species.

• Journal of Biosystems Engineering
• /
• v.20 no.4
• /
• pp.360-367
• /
• 1995

The effect of air vent holes, stacking methods of boxes and clearance between boxes on static pressure drop, were measured to design of pressure cooling system. Static pressure drops in air vent hole of carton box were measured for different hole opening ratio from 1% to 5%. Static pressure drop was expressed as a function of superficial velocity as second-degree polynomial. At given static pressure in plenum chamber, static pressure drop in boxes was shown as second-degree polynomial of the number of carton box in series stacking method, as first-degree polynomial in height and parallel stacking method. In pressure cooling of 24 boxes of Tsugaru apple, air flow rates through clearance between the boxes were shown 1.27 and 1.65 times than those of through the inside of boxes at the plenum pressure of 10mmAq and 20mmAq, respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.4
• /
• pp.328-334
• /
• 2006

Industrial electrostatic precipitators require a highly uniform velocity distribution in the collecting chamber. Increasing divergence angle of a diffuser makes a non-uniformity flow distribution characteristics on the diffuser exit. This paper provides CFD results of optimum positions and opening rates of perforated plates which were installed in the electrostatic precipitator. The considered divergence angels were 60 degree and 90 degree. In 90 degree diffuser, a blanking method was used.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1488-1493
• /
• 2004

The purpose of the present work is to develop a compressed air discharging system to eject a projectile from the underwater. For the flow analysis of compressed air tank, projectile ejection tube, and pipe system, the air is assumed as an ideal gas, undergoing 1-dimensional axisymmetric, compressible flow, the Fanno flow analysis was applied. The commercial Fluent code was used to solve 3-D Navier-Stokes equation of the internal flow within the valve. The dynamics of the projectile within the ejection tube was assumed 1-degree of freedom. The calculations were performed to four cases of valve opening area ratio, i.e., 25%, 50%, 75%, and 100% opening area, at both depths of 10m and 50m. The results were shown as the figures of time variation of pressure of the compressed air tank and projectile ejection tube. The velocity and distance of the projectile were also predicted.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.291-298
• /
• 2003

Interfacial crack problems between fiber and matrix in composite materials are discussed. A series of interfacial crack initiation and propagation experiments are conducted using the biaxial loading device for various mode-mixes. Normal crack opening displacement (NCOD) is measured near crack front by a crack opening interferometry and used for extracting fracture parameters. From mixed mode interfacial crack initiation experiments, large increase in toughness with shear components is observed. Initial velocity of crack propagation is very dependent upon the mode-mixes. It increased with positive mode-mix due to the increase of stress singularities ahead of crack front and decreased with negative mode-mix resulting from the increase of the degree of compressive stress behind the crack front. Crack propagation was less accelerated with positive mode-mix than the negative mode-mix.

• The Journal of the Korean dental association
• /
• v.10 no.2
• /
• pp.91-96
• /
• 1972

The tests on the oral capacties which are divided into five groups on centric occlusion position, physiologic rest position, two mm open bite position, four mm open bite position, and maximum opening position of the mandible were conducted on the one hundread normal dental college students and staffs. The aims were to study the changeability of the fundamental oral structure, to get some helpful informations for the full denture wearers and related physiology, and also to find out further experimental standards. The results were as follows; 1. There was also some volumetric space in centric occlusion position. 2. The greater the voluntary opening degree of the mandible was, the greater the oral volumetric capacity was. 3. There were no correlations between the oral capacity and height, weight, and cheek thickness. 4. There were no correlations between the centric occlusion position and physiologic rest position, and voluntary positions of the mandible. 5. The inserted material into the oral cavity was much influential to the physiologic rest position.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.10-11
• /
• 2018

In the building, the opening penetrates the wall and serves as a spreading channel for smoke and flame in case of fire. In Korea, more than 1,500 fire plume are generated annually, and the number has increased by about 30% over the past five years. Therefore, in the case of windows protecting the opening, fire protection performance is important to prevent the spread of fire. However, in Korea, the standard for window is not clear. In this study, fire tests (EN 13823) for windows were conducted in Korea, and then fire protection performance of windows was compared. As a result of the experiment, PVC windows showed a phenomenon that they could not withstand the temperature during the fire experiment, and AL windows showed a difference in the degree of cracking of the glass.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.10 s.253
• /
• pp.1269-1275
• /
• 2006

The purpose of this study is to investigate the effect of bend angle on the collapse behavior of locally wall thinned pipe bends. For this purpose, the present study performed three-dimensional finite element analysis on the 30-, 60-, and 90-degree pipe bends with local wall thinning at the center of intrados, extrados, and crown, and evaluated the collapse moment for different thinning dimensions under closing- and opening-mode bending with a constant internal pressure. The results showed that, for intrados and extrados wall thinning, the reduction in the collapse moment due to local wall thinning became significant with decreasing bend angle of pipe bends. This effect of bend angle was enhanced with increasing thinning dimensions, and it was clearer fur opening-mode bending than for closing-mode bending. For crown wall thinning, however, the effect of bend angle was unclear and was less sensitive to the change of wall thinning shapes.

• Geomechanics and Engineering
• /
• v.14 no.2
• /
• pp.187-193
• /
• 2018

Water inrush through the destruction of water resisting rock mass structure was divided into direct water inrush, key block water inrush and splitting water inrush. In the direct water inrush, the Reynolds numbers has a significant effect on the distribution of the water flow and vortex occurred in the large Reynolds numbers. The permeability coefficient of the fracture is much larger than the rock, and the difference is between 104 and 107 times. The traditional theory and methods are not considering the effect of inertia force. In the position of the cross fracture, the distribution of water flow can only be linearly distributed according to the fracture opening degree. With the increase of Reynolds number, the relationship between water flow distribution and fracture opening is studied by Semtex.