• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.134-138
• /
• 2004

The discrepancies between theoretical values and measured data of PEFC(Proton Exchange Fuel Cell) is carried out for the machine tool power generation. Rudimental approach of theoretical fuel cell open circuit potential using Gibbs free energy is employed for the examination of PEFC module. The stack temperature, stack voltage and stack current are measured during the operation of PEFC module. It is found that stack voltage and current values show the pronounced discrepancy with the results calculated by Gibbs free energy approach. It is analysed that the discrepancy is due to activation polarization, concentration overvoltage and ohmic overvoltage.

• 전기화학회지
• /
• 제6권2호
• /
• pp.113-118
• /
• 2003

폴리아닐린 분말과 고분자 계면활성제, cyclohexanone용매를 micro-milling장치내에서 분산시켜 (m입자 크기를 갖는 가공용이한 분산액을 제조하였다. 분산액을 백금 전극 위에 코팅하여 얻은 분산박막의 전기화학적 특성들은 순환전압전류법(CV)을 이용하여 조사하였다. CV의 결과에 의하면 폴리아닐린 분산박막이 순수한 폴리아닐린 박막과 유사한 전기화학적 특성을 갖는 것으로 나타났다. $3wt.\%$ NaCl용액에서 수행한 분극실험과 열린회로전위 측정 실험에서는 PANI분산액을 철표면에 코팅하면 부식전위가 증가하였다. 분산박막/철 전극의 열린회로전위값(OCP, Voc)이 분산액의 제조 조건에 따라 변화가 있음을 관찰하였다. 이러한 결과들은 본 연구에서 사용한 전도성 고분자 분산액이 철의 부식방지코팅물질로서 유용성을 갖고 있다는 것을 보여주고 있다.

• 공업화학
• /
• 제16권5호
• /
• pp.684-688
• /
• 2005

산도가 각기 다른 양성자산(HF, HCI, HBr, HI, $H_2SO_4$)의 수용액내에서 아닐린을 중합하였다. 이때 산도(pH)와 상대이온(counter ion)의 반응성에 따른 반응속도에 관하여 조사하였다. 반응속도에 대한 양성자산의 영향을 조사하기 위하여, open-circuit potential을 측정하였다. 그 결과 HF 수용액내에서 중합속도가 가장 느리게 나타났고, HI 수용액내에서는 중합반응이 진행되지 않았으며, 이러한 결과들을 산도(pH)와 산화력과의 관계로 설명하였다. 양성자산의 종류에 따라 dimer들의 생성비율도 각기 다르게 나타났으며, 이러한 결과들을 상대이온(음이온)의 친핵성도 (nucleophilicity), 용매화효과 및 이동도의 영향으로 설명하였다.

• 한국융합학회논문지
• /
• 제12권5호
• /
• pp.185-190
• /
• 2021

전기분해 공정으로 제조한 전해산성수를 이용하여 생활 악취의 원인인 암모니아를 제거하는 방법을 연구하였다. 제조한 전해산성수는 pH와 ORP 변화 측정을 통해 안정적으로 알칼리성 암모니아를 중화 시킬 수 있는 전해수(중화제)로 확인되었다. 자외-가시선 흡광도 분석과 전기화학적 개방회로 전위 측정으로 전해산성수와 암모니아수를 혼합한 용액에서 암모니아가 제거되는 것을 확인하였다. 암모니아 가스 발생량 측정을 통해 전해산성수가 암모니아를 중화시켜 악취 발생시키는 암모니아가 효과적으로 제거되는 것으로 조사되었다. 친환경적인 전해산성수가 악취의 원인 물질인 암모니아를 효과적으로 안전하게 제거할 수 있는 것으로 확인되었다.

• Journal of Electrochemical Science and Technology
• /
• 제3권4호
• /
• pp.185-189
• /
• 2012

A.c. impedances of mechanically polished CP-Ti specimens were measured at open-circuit potential (OCP) with immersion time and under applied anodic potentials between -0.2 and 1 $V_{Ag/AgCl}$ in 0.1 M NaOH solution. Capacitances of native oxide films ($C_{ox,na}$) grown naturally and capacitances of anodic oxide films ($C_{ox,an}$) formed under applied anodic potentials were obtained to examine the growth of native and anodic oxide films in 0.1 M NaOH solution and how to use $C_{ox,na}$ for the surface area measurement of Ti specimen. $1/C_{ox,na}$ and $1/C_{ox,an}$ appeared to be linearly proportional to OCP and applied potential ($E_{app}$), with proportional constants of 0.086 and 0.051 $uF^{-1}\;V^{-1}$, respectively. The $C_{ox,na}$ also appeared to be linearly proportional to geometric surface area of the mechanically polished CP-Ti fixture specimen, with proportional constants of 11.3 and $8.5{\mu}F\;cm^{-2}$ at -0.45 $V_{Ag/AgCl}$ and -0.25 $V_{Ag/AgCl}$ of OCPs, respectively, in 0.1 M NaOH solution. This linear relationship between $C_{ox,na}$ and surface area is suggested to be applicable for the measurement of real surface area of Ti specimen.

• 방사성폐기물학회지
• /
• 제18권2호
• /
• pp.143-155
• /
• 2020

A reference electrode is important for controlling electrochemical reactions. Evaluating properties such as the reduction potential of the elements is necessary to optimize the electrochemical processes in pyroprocessing, especially in a multicomponent environment. In molten chloride systems, which are widely used in pyroprocessing, a reference electrode is made by enclosing the silver wire and molten salt solution containing silver chloride into the membranes. However, owing to the high temperature of the molten salt, the choice of the membrane for the reference electrode is limited. In this study, three types of electroceramic, mullite, Pyrex, and quartz, were compared as reference electrode membranes. They are widely used in molten salt electrochemical processes. The potential measurements between the two reference electrode systems showed that the mullite membrane has potential deviations of approximately 50 mV or less at temperatures higher than 650℃, Pyrex at temperatures lower than 500℃, and quartz at temperatures higher than 800℃. Cyclic voltammograms with different membranes showed a significant potential shift when different membranes were utilized. This research demonstrated the uncertainties of potential measurement by a single membrane and the potential shift that occurs because of the use of different membranes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1156-1158
• /
• 2005

This paper deals with the prediction of characteristic for permanent magnet linear synchronous motor(PMLSM). The open-circuit field distribution is predicted using a two-dimensional(2-D) analytical solution derivd in terms of magnetic vector potential. The slotting and skew effect is considered using the relative permeance function. and than using this result, flux linkage and back EMF is calculated. The results are validated extensively by finite element(FE) analyses and measurement.

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.311-315
• /
• 2007

The anodic polarization behavior of equiatomic TiNi shape memory alloy with pure titanium as a reference material was investigated by means of open circuit potential measurement and potentiodynamic polarization technique. And the structure of passive films on TiNi intermetallic compounds was also conducted using AES and ESCA. While the dissolved Ni(II) ion did not affect the dissolution rate and passivation of TiNi alloy, the dissolved Ti(III) ion was oxidated to Ti(IV) ion on passivated TiNi surface at passivation potential. It has also been found that the Ti(IV) ion increases the steady state potential, and passivates TiNi alloy at a limited concentration of Ti(IV) ion. The analysis by AES showed that passive film of TiNi alloy was composed of titanium oxide and nickel oxide, and the content of titanium was three times higher than that of nickel in outer side of passive film. According to the ESCA analysis, the passive film was composed of $TiO_2$ and NiO. It seems reasonable to suppose that NiO could act as unstabilizer to the oxide film and could be dissolved preferentially. Therefore, nickel oxide contained in the passive film may promote the dissolution of the film, and it could be explained the reason of higher pitting susceptibility of TiNi alloy than pure Ti.

• 공업화학
• /
• 제20권1호
• /
• pp.75-79
• /
• 2009

아닐린 단량체(monomer)의 화학적 중합시 사슬성장의 핵심생성구간에서 아닐린 이합체(dimer, p-aminodiphenylamine)의 몰 비율을 조절하여 반응용액에 첨가함으로써 분자량(Mw, 20000~10000) 조절이 가능한 폴리아닐린을 합성 하였다. 중합반응의 개시로 부터 측정된 반응시간에 따른 open-circuit potential 측정결과 첨가된 이합체의 몰수가 증가할수록 중합속도가 빨라짐을 확인하였다. 첨가된 이합체의 몰수가 증가할수록 UV/Vis. 측정결과 합성된 폴리아닐린의 흡수띄가 단파장으로 이동하였으며, GPC 측정결과 분자량이 감소하는 것을 볼 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.57-58
• /
• 2022

Reinforced concrete (RC) structures play a significant role in the construction industries. An embeddable solid-state reference electrode (ESSRE) was used to evaluate the corrosion status of steel rebar in the concrete of various cover thicknesses that exposed to the maritime environment (3.5 % NaCl) in this study. From the open circuit potential measurement (OCP), the passive state, the corrosion uncertainty, and the 90% probability of corrosion state of the steel rebars in the concrete were monitored by ESSRE. From the electrochemical impedance spectroscopy (EIS) method, severe corrosion was observed at the exposure period of 1510, 1847, 2350, and 3020 h for C10, C15, C20, and C30 concrete, respectively. The results confirm that the ESSRE can be useful to identify the corrosion occurrence and severe corrosion of steel rebar embedded in different cover depth concrete structures.