• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.55-64
• /
• 1988

Stow nets have widely been used in the western sea of Korea from the olden age. The original structure of a stow net is a large square-sectional bag net made of 4 netting panels, and the front fringes of top and bottom panels are connected to the top and bottom beams respectively. Wire ropes, which is originated from the holding anchor are gradually forked and biforked, and finally 4 pieces of wire rope (biforked pendants) are jointed to each beam. Much convenience caused by long and heavy beams were problemed, then some studies have been carried out to improve the net since 1930's. The most effective improvement were achieved in 1980 by Mr. Han and his colleagues. The key point of improvement was that the beams were removed and the belt shaped shearing device made by canvas was attached to the side panels, the head rope and ground rope to the front fringe of top and bottom panel, and biforked pendants are joined to the shearing device. Even though this is the epoch-making improvement of a stow net, the further study should be required to find out more effective method. The authors carried out a model experiment on the stow net to determine the vertical and horizontal opening of a net mouth, and also examine the front, top and side-view configuration of the net. The model net was constructed depending on the Similarity Law of Fishing Gear in 1/10 and 1/20 scale and set against to the current at shallow and speedy flowing channel. The vertical and horizontal openings were determined by using scaled bamboo poles, and the configuration was observed by using specially prepared observation platform and underwater observation glass, and also photographed by using specially prepared underwater photographic equipment. The results obtained can be summarized as follows: 1. The opening height and width of the shearing device varied in accordance with the relative length of the biforked pendants. Considering the height and width of shearing device in 6 cases of the arrangement system of biforked pendants, the best result was obtained in the case that the 2nd, 3rd and 4th pendents from the bottom-most was 5%, 9% and 4% longer than that. 2. On the top-view configuration the excessive deformation of head rope and ground rope were observed. In the actual net, 54m long head rope and ground rope were attached to the front fringe of top and bottom panels so that the head rope may be lifted to make the net mouth open highly. But actually the head rope and the ground rope are streamed backward without any lift, and also the netting followed the ropes were deformed until the 2/5 in the whole length of the net. This deformation may be guessed to disturb the entrance of fish school into the net and also caused the net to get caught by obstacles in the sea bed and to be broken largely. 3. Hydrodynamic resistance R of the actual net may be deduced as R(kg)=29.2$\times$103 v1.65. It is also expressed as R(kg)=5.9$\times$d/l$\times$ab v1.65. depending on the formula deduced by Koyama to estimate the resistance of trawl nets, where d/l denote the ratio between diameter of netting twine and length of mesh leg in every part of side panel, a and b, the stretched circumference of the mouth and the stretched length of the net, respectively.

• Journal of Chest Surgery
• /
• v.36 no.9
• /
• pp.638-645
• /
• 2003

The purposes of this study were to evaluate the effect of myocardial protection with our cold blood cardioplegic solution and to observe the relationship between ultrastructural study and other evaluation methods and its effectiveness. Material and Method: We evaluated the changes of myocardial ultrastructure using semi-quantitative scoring system, CK-MB fraction, SGOT and LDH1/LDH2, and EKG in 18 patients undergoing valvular heart surgery and coronary artery bypass grafting (CABG). Right atrial auricular biopsies were taken before the cardiopulmonary bypass (CPB) and shortly after the end of CPB. Myocardium-related serum enzymes ＆ EKG were checked for 3 days of postoperative period and their postoperative peak enzyme value and observed new Q wave ＆ ST segment elevation in EKG were choosen. Result: There were 8 males and 10 females, and their mean age was 55.6$\pm$13. Eight patients underwent valvular heart surgery and ten coronary artery bypass grafting, The mean CPB time was 119$\pm$29 minutes and the mean aortic cross-clamp (ACC) time was 75.4$\pm$24 minutes. Before the start of CPB, the mean mitochondrial score was 4.28$\pm$0.53 and after the end of CPB, it significantly increased to 2.35$\pm$0.79. There was no evidence of perioperative myocardial infarction in terms of myocardiumrelated serum enzyme value and Q wave and ST change in EKG. There was no significant relationship between pre-CPB and post-CPB mitochondrial score and the mean time of CPB and ACC, and the mean value of postoperative peak CK-MB, SGOT and LDH1/LDH2, but there was relatively positive correlation of CPB time with peak LDH1/LDH2. Conclusion: Despite the apparent satisfactory results in myocardium-related serum enzymes ＆ EKG, with this study using the cold blood cardioplegic solution, there were many changes in myocardial ultrastructures, and more studies are needed to obtain further information.

• Journal of Chest Surgery
• /
• v.40 no.12
• /
• pp.825-830
• /
• 2007

Background: Minimally invasive cardiac surgery appears to offer certain advantages such as earlier postoperative recovery and a greater cosmetic effect than that achieved through conventional sternotomy. However, this approach has not yet been widely adopted in Korea to replace complex open heart surgery such as mitral valve reconstruction. This study compared the results of robot assisted minimally invasive mitral valve repair with those results of conventional sternotomy. Material and Method: From December 1993 to December 2005, 520 consecutive patients underwent mitral valve reconstruction for mitral regurgitation in our institution. These patients were subdivided according to those whose surgery used the conventional sternotomy approach (Group S, n=432) and those who underwent minimally invasive right anterior thoracotomy (Group M, n=88); we then compared the clinical results of both groups. When we performed minimally invasive right thoracotomy, we used a robot (AESOP 3000) and made an incision less than 5 cm. Result: Our study patients in both groups were similar for their age, gender and preoperative ejection fraction. There were two hospital mortalities in group S. but there was no mortality in the group M patients. Significant reductions in the ICU stay and the postoperative hospital stay were observed in the group M patients compared with the group S patients. However, both the bypass time and the aortic cross-clamp time were significantly longer in the group M patients. In spite of the confined incision in the group M patients, there were no limitations on the mitral valve repair techniques. There was a similar frequency of postoperative significant residual mitral regurgitation in both groups. Conclusion: In this study, the minimally invasive mitral valve repair showed comparable early results with the conventional sternotomy patients. We will now need long-term follow-up of these patients who underwent minimally invasive mitral valve repair, but we anticipate that based on the results of this study, we will begin to routinely perform minimally invasive cardiac surgery as out primary approach for mitral valve reconstruction.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.49-67
• /
• 2013

The purpose of this study is to analyze the external systems and the units 'problem solving and invention' of the middle school technology and home economics 1 textbooks of the revised 2011 national curriculum in an effort to provide some information on the content system of invention education in technology class, as invention education was provided as part of a regular subject for the first time. The findings of the study were as follows: First, 'Technology and Inventions' chapter of Technology and Home Economics 1 Textbooks occupied 10-18% share, with the subchapter of 'Problem Solving and Invention' unit taking up 6.7-29% of the textbooks. Second, for most textbooks, 'Technological Problem Solving', 'Idea Generation' 'Multi-dimensional Projection Method', 'Expansive Thought-Processing Methodology', 'Converging Thought Methodology' and 'Invention in Everyday Lives' were included as main contents based on the accomplishment criteria presented in education process interpretation documents. Third, the detailed structures were generally made up as follows: Introduction (Broad Chapter Title, Subchapter Table of Contents, Introduction, Subchapter Title, Study Objectives, Open Thinking); Development (Unit Title, Thinking Ahead, Core Terms, Main Text, Study Helper, Activities, Research Exercises, Supplemental Readings, In-depth Study Topics, Technology in Everyday Lives, Reading Topics, Discussion Topics, and Career Helpers); and Summary (Subchapter Summary, Study Summary, Terms Summary, Writing Follow-up, Self Review, Broad Chapter Evaluation). Fourth, based on the analysis of figures included, photographs had the largest share, followed by figures, tables, and graphs. The photos were used to illustrate various inventions, invention methodologies, and exercise activities, while figures were included to depict the contents included in the main text, and the tables to assist to preparation of process diagrams or materials lists. Fifth, based on the analysis of content weights, greater weights were placed on 'Inventions and Thoughts', and 'Invention Experiment Activities,' while 'Understanding Inventions' and 'Invention and Patents' chapters did not have a lot of texts involved. Sixth, based on the analysis of content presentation methods, most textbooks combined figures, tables, illustrations and texts to discuss the topics. Based on the above study results, we suggest the following: First, a consistent education curriculum should be developed over the topic of invention; and second, more precise and systematic analysis of textbooks would need to be performed.

• Economic and Environmental Geology
• /
• v.45 no.1
• /
• pp.31-40
• /
• 2012

This paper examined the characteristics of ductile and brittle structural elements with detailed mapping by lithofacies classification to clarify the relationship between the geological structure and the geochemical high-grade uranium anormal zone and to provide the basic information on the flow of groundwater in the eastern area of Shinbo mine, Jinan-gun, Jeollabuk-do, Korea. It indicates that this area is mainly composed of Precambrian quartzite, metapelite, metapsammite, which show a zonal distribution of mainly ENE-WSW trend, and age unknown pegmatite and Cretaceous porphyry which intrude them. But the Cretaceous Jinan Group which unconformably covers them, contrary to assumption, could not be observed. The main ductile deformation structures of Precambrian metasedimentary rocks were formed at least through three phases of deformation [ENE striking regional foliation (D1) -> ENE or EW striking crenulation foliation (D2) -> WNW or EW trending open, tight, kink folds (D3)]. The predominant orientation of S1 regional foliation strikes ENE and dips south, being similar to the zonal distribution of Precambrian metasedimentary rocks. Most predominant orientation of high-angled brittle fracture (dip angle ${\geq}45^{\circ}$) [ENE (frequency: 24.3%) > NS (23.9%) > (N)NW (18.8%) > WNW (16.9%) > NE (16.1%) fracture sets in descending frequency order], which is closely related to the flow of groundwater, strikes ENE and dips south. It also agrees with the zonal distribution of metasedimentary rocks and the predominant orientation of S1 regional foliation. The next one strikes NS and dips east or west. Considering the controlling factor of the geochemical uranium anormal zone in the Shinbo mine and its eastern areas from the above structural data. the uranium source rock in these areas might be pegmatite and the geochemical uranium anormal zone in the Sinbo mine area could be formed by an secondary enrichment through the flow of pegmatite aquifer's groundwater into the Sinbo mine area like the previous research's result.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.3
• /
• pp.320-330
• /
• 2018

This study analyzed the curriculum and clinical practicum of the department of clinical laboratory science in Korea. The 2017 educational curricula of all 3-year and 4-year universities were analyzed. Clinical practice was conducted by a questionnaire. As a result of curriculum analysis, the 3-year curriculum was able to grasp the curriculum that focused on the national examinations of medical technologists, and the 4-year curriculum was open to a variety of subjects reflecting the changes in the future, but only at a few universities. In addition, the autonomous enrollment application made it possible to take a national examination without enrolling in courses that students find difficult in major courses. In the case of clinical practice, it was difficult to standardize in various practical institutes, practice periods, and practice credits. Therefore, it will be necessary to standardize the composition of the credits according to the duration of clinical practice and the duration of education. Moreover, is necessary to revise the curriculum in consideration of medical technologist job analysis and clinical field, and it will be necessary to standardize the curriculum and clinical practice model through the Medical Technologist Evaluation Center.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.19
• /
• pp.224-242
• /
• 2003

The author believes that the main task of study in international trade usage and practice is the management of transactional risks involved in international sale of goods. They are foreign exchange risks, transportation risks, credit risk, risk of miscommunication, etc. In most cases, these risks are more serious and enormous than those involved in domestic sales. Historically, the merchant adventurers organized the voyage abroad, secured trade finance, and went around the ocean with their own or consigned cargo until around the $mid-19^{th}$ century. They did business faceto-face at the trade fair or the open port where they maintained the local offices, so-called "Trading House"(商館). Thererfore, the transactional risks might have been one-sided either with the seller or the buyer. The bottomry seemed a typical arrangement for risk sharing among the interested parties to the adventure. In this way, such organizational arrangements coped with or bore the transactional risks. With the advent of ocean liner services and wireless communication across the national border in the $19^{th}$ century, the business of merchant adventurers developed toward the clear division of labor; sales by mercantile agents, and ocean transportation by the steam ship companies. The international banking helped the process to be accelerated. Then, bills of lading backed up by the statute made it possible to conduct documentary sales with a foreign partner in different country. Thus, FOB terms including ocean freight and CIF terms emerged gradually as standard trade terms in which transactional risks were allocated through negotiation between the seller and the buyer located in different countries. Both of them did not have to go abroad with their cargo. Instead, documentation in compliance with the terms of the contract(plus an L/C in some cases) must by 'strictly' fulfilled. In other words, the set of contractual documents must be tendered in advance of the arrival of the goods at port of discharge. Trust or reliance is placed on such contractual paper documents. However, the container transport services introduced as international intermodal transport since the late 1960s frequently caused the earlier arrival of the goods at the destination before the presentation of the set of paper documents, which may take 5 to 10% of the amount of transaction. In addition, the size of the container vessel required the speedy transport documentation before sailing from the port of loading. In these circumstances, computerized processing of transport related documents became essential for inexpensive transaction cost and uninterrupted distribution of the goods. Such computerization does not stop at the phase of transportation but extends to cover the whole process of international trade, transforming the documentary sales into less-paper trade and further into paperless trade, i.e., EDI or E-Commerce. Now we face the other side of the coin, which is data security and paperless transfer of legal rights and obligations. Unfortunately, these issues are not effectively covered by a set of contracts only. Obviously, EDI or E-Commerce is based on the common business process and harmonized system of various data codes as well as the standard message formats. This essential feature of E-Commerce needs effective coordination of different divisions of business and tight control over credit arrangements in addition to the standard contract of sales. In a few word, information does not alway invite "trust". Credit flows from people, or close organizational tie-ups. It is our common understanding that, without well-orchestrated organizational arrangements made by leading companies, E-Commerce does not work well for paperless trade. With such arrangements well in place, participating E-business members do not need to seriously care for credit risk. Finally, it is also clear that E-International Commerce must be linked up with a set of government EDIs such as NACCS, Port EDI, JETRAS, etc, in Japan. Therefore, there is still a long way before us to go for E-Commerce in practice, not on the top of information manager's desk.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.23-30
• /
• 2007

The ultimate objective of this study is to develop oxygen-enriched combustion techniques applicable to the system of practical industrial boiler. To this end the combustion characteristics of lab-scale LNG combustor were investigated as a first step using the method of numerical simulation by analyzing the flame characteristics and pollutant emission behaviour as a function of oxygen enrichment level. Several useful conclusions could be drawn based on this study. First of all, the increase of oxygen enrichment level instead of air caused long and thin flame called laminar flame feature. This was in good agreement with experimental results appeared in open literature and explained by the effect of the decrease of turbulent mixing due to the decrease of absolute amount of oxidizer flow rate by the absence of the nitrogen species. Further, as expected, oxygen enrichment increased the flame temperatures to a significant level together with concentrations of $CO_2$ and $H_2O$ species because of the elimination of the heat sink and dilution effects by the presence of $N_2$ inert gas. However, the increased flame temperature with $O_2$ enriched air showed the high possibility of the generation of thermal $NO_x$ if nitrogen species were present. In order to remedy the problem caused by the oxygen-enriched combustion, the appropriate amount of recirculation $CO_2$ gas was desirable to enhance the turbulent mixing and thereby flame stability and further optimum determination of operational conditions were necessary. For example, the adjustment of burner with swirl angle of $30\sim45^{\circ}$ increased the combustion efficiency of LNG fuel and simultaneously dropped the $NO_x$ formation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.3
• /
• pp.138-149
• /
• 2008

Rapid accumulation of carbon dioxide in the atmosphere for the past century leads to acidify the surface ocean and contributes to the global warming as it forms acid in the ocean and it is a green house gas. In order to curb the green house gas emissions, in particular carbon dioxide, various multilateral agreements and programs have been established including UN Convention of Climate Change and its Kyoto Protocol for the last decades. Also a number of geo-engineering projects to manipulate the radiation balance of the earth have been proposed both from the science and industrial community worldwide. One of them is ocean fertilization to sequester carbon dioxide from the atmosphere through the photosynthesis of phytoplankton in the sea. Deliberate fertilization of the ocean with iron or nitrogen to large areas of the ocean has been proposed by commercial sector recently. Unfortunately the environmental consequences of the large scale ocean iron fertilization are not known and the current scientific information is still not sufcient to predict. In 2007, the joint meeting of parties of the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter, 1972 and 1996 Protocol (London Convention/Protocol) has started considering the purposes and circumstances of proposed large-scale ocean iron fertilization operations and examined whether these activities are compatible with the aims of the Convention and Protocol and explore the need, and the potential mechanisms for regulation of such operations. The aim of this paper is to review the current development on the commercial ocean fertilization activities and management regimes in the potential ocean fertilization activities in the territorial sea, exclusive economic zone, and high seas, respectively, and further to have a view on the emerging international management regime to be London Convention/Protocol in conjunction with a support from the United Nations General Assembly through The United Nations Open-ended Informal Consultative Process on Oceans and the Law of the Sea.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.243-251
• /
• 2015

This study aimed to determine the effects of root zone cooling using air duct on air temperature distribution and root zone and leaf temperatures of sweet pepper (Capsicum annum L. 'Veyron') grown on coir substrate hydroponic system in a greenhouse. When the air duct was laid at the passage adjacent the slab, the direction of air blowing was upstream at $45^{\circ}$. The cooling temperature was set at $20^{\circ}C$ for day and $18^{\circ}C$ for night. For cooing timing treatments, the cooling air was applied at all day (All-day), only night time (5 p.m. to 1 a.m.; Night), or no cooling (Control). The air temperature inside the greenhouse at a height of 40 and 80cm above the floor, and substrate and leaf temperatures, fruit characteristics, and fruit ratio were measured. Under the All-day treatment, the air temperature was decreased about $4.4{\sim}5.1^{\circ}C$ at the height of 40cm and $2.1{\sim}3.1^{\circ}C$ at the height of 80cm. Under the Night treatment, the air temperature was decreased about $3.4{\sim}3.8^{\circ}C$ at the height of 40cm and $2.2{\sim}2.7^{\circ}C$ at the height of 80cm. The daily average temperature in the substrate was in the order of the Control ($27.7^{\circ}C$) > Night ($24.1^{\circ}C$) > All-day ($22.8^{\circ}C$) treatment. Cooling the passage with either upstream blowing at $45^{\circ}$ or horizontal blowing at $180^{\circ}$ was effective in lowering the air temperature at a height of 50cm; however, no difference at a height of 100cm. Cooling the passage with perpendicular direction at $90^{\circ}$ was effective in lowering the air temperature at the height between 100 and 200cm above the floor; however, no effect on the temperature at the height of 50cm. A greater decrease in leaf temperature was found at 7 p.m. than that at 9. a.m. under both All-day and Night treatments. Fresh weight partitioning of fruit was in the order of the All-day (48.6%) > Night (45.6%) > Control (24.4%) treatment. A higher fruit production was observed under the All-day treatment, in which the accumulated average temperature was the lowest, and it may have been led to a higher proportion of photosynthate distributed to fruit than other treatments.