• Smart Structures and Systems
• /
• v.11 no.6
• /
• pp.589-604
• /
• 2013

Identification of damage has become an evolving area of research over the last few decades with increasing the need of online health monitoring of the large structures. The visual damage detection can be impractical, expensive and ineffective in case of large structures, e.g., offshore platforms, offshore pipelines, multi-storied buildings and bridges. Damage in a system causes a change in the dynamic properties of the system. The structural damage is typically a local phenomenon, which tends to be captured by higher frequency signals. Most of vibration-based damage detection methods require modal properties that are obtained from measured signals through the system identification techniques. However, the modal properties such as natural frequencies and mode shapes are not such good sensitive indication of structural damage. Identification of damaged jacket type offshore platform members, based on wavelet packet transform is presented in this paper. The jacket platform is excited by simple wave load. Response of actual jacket needs to be measured. Dynamic signals are measured by finite element analysis result. It is assumed that this is actual response of the platform measured in the field. The dynamic signals first decomposed into wavelet packet components. Then eliminating some of the component signals (eliminate approximation component of wavelet packet decomposition), component energies of remained signal (detail components) are calculated and used for damage assessment. This method is called Detail Signal Energy Rate Index (DSERI). The results show that reduced wavelet packet component energies are good candidate indices which are sensitive to structural damage. These component energies can be used for damage assessment including identifying damage occurrence and are applicable for finding damages' location.

• Korean Journal of Clinical Pharmacy
• /
• v.28 no.3
• /
• pp.188-193
• /
• 2018

Background: Previous studies have noted that the simultaneous use of sulfonylureas and antimicrobials, which is common, could increase the risk of hypoglycemia. In particular, an age of 65 years or older is a known risk factor for sulfonylurea-related hypoglycemia in hospitalized patients. Therefore, we performed this study to determine the potential risk of hypoglycemia from the concurrent use of antimicrobials and sulfonylureas. Methods: We performed a cross-sectional study on the National Health Insurance Service-National Sample Cohort from 2013. The eligibility criteria included patients of 65 years of age or older taking a sulfonylurea with 25 different antimicrobials. Different risk ratings of severity in drug-drug interactions (potential DDIs), level X, D, or C in Lexi-$Interact^{TM}$ online, and contraindicated, major, or moderate severity level in $Micromedex^{(R)}$ were included. SAS version 9.4 was used for data analysis. Results: A total of 6,006 elderly patients with 25,613 prescriptions were included. The largest age group was 70 to 74 (32.7%), and 39.7% of patients were men. The mean number of prescriptions was 4.3 per patient. The most frequently used antimicrobials were levofloxacin (6,583, 25.7%), ofloxacin (6,549, 25.6%), fluconazole (4,678, 18.0%), and ciprofloxacin (2,551, 9.8%). Among sulfonylureas, glimepiride was prescribed most frequently, followed by gliclazide, glibenclamide, and glipizide. Conclusion: Of the antimicrobials with a high potential of hypoglycemia, levofloxacin, ofloxacin, fluconazole, and ciprofloxacin were used frequently. Thus, the monitoring of clinically relevant interactions is required for patients concurrently administered sulfonylureas and antimicrobials.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.272-275
• /
• 2014

An improved fuzzy Kalman filtering speed estimation scheme was proposed by means of measuring stator side voltage and current value based on vector control state equation of induction motor. The designed fuzzy adaptive controller conducted recursive online correction of measurement noise covariance matrix by monitoring the ratio of theory residuals and actual residuals to make it approach real noise level gradually, allowing the filter to perform optimal estimation to improve estimation accuracy of EKF. Meanwhile, co-simulation scheme based on MATLAB and Ansoft was proposed in order to improve simulation accuracy. Field-circuit coupling problems of induction motor under the action of vector control were solved and the parameter optimization accuracy was improved dramatically. The simulation and experimental results show that this algorithm has a strong ability to inhibit the random measurement noise. It is able to estimate motor speed accurately, and has superior static and dynamic characteristics.

• The Korea Journal of Herbology
• /
• v.31 no.4
• /
• pp.93-100
• /
• 2016

Objectives : The internet is the most common method to investigate information. It is showed that 75.2% of Internet users of 20s had health information search experience. So this study is aim to understanding of interest of public about the herbal medicine using internet search query volume data.Methods : The Naver that is the top internet portal web service of the Republic of Korea has provided an Internet search query volume data from January 2007 to the current through the Naver data lab (http://datalab.naver.com) service. We have collected search query volume data which was provided by the Naver in 606 herbal medicine names and sorted the data by peak and total search volume.Results : The most frequently searched herbal medicines which has less bias and sorted by peak search volume is 'wasong (와송)'. And the most frequently searched herbal medicines which has less bias and sorted by total search volume is 'hasuo (하수오)'.Conclustions : This study is showed that the rank of interest of public about herbal medicines. Among the above herbal medicines, some herbal medicines had supply issue. And there are some other herbal medicines that had very little demand in Korean medicine market, but highly interested public. So it is necessary to monitor for these herbal medicines which is highly interested of the public. Furthermore if the reliability of the data obtained on the basis of these studies, it is possible to be utilizing herbal medicine monitoring service.

• Quality Improvement in Health Care
• /
• v.22 no.2
• /
• pp.43-73
• /
• 2016

Purpose: The aims of this study were to assess the presence of core patient safety practices in Korean hospitals and assess the differences in reporting and learning systems of patient safety, infrastructure, and safe practices by hospital characteristics. Methods: The authors developed a questionnaire including 39 items of patient safety staffing, health information system, reporting system, and event-specific prevention practices. The survey was conducted online or e-mail with 407 tertiary, general and specialty hospitals. Results: About 90% of hospitals answered the self-reporting system of patient safety related events is established. More than 90% of hospitals applied incidence monitoring or root cause analysis on healthcare-associated infection, in-facility pressure ulcers and falls, but only 60% did on surgery/procedure related events. More than 50% of the hospitals did not adopted present on admission (POA) indicators. One hundred (80.0%) hospitals had a department of patient safety and/or quality and only 52.8% of hospitals had a patient safety officer (PSO). While 82.4% of hospitals used electronic medical records (EMRs), only 53% of these hospitals adopted clinical decision support function. Infrastructure for patient safety except EMRs was well established in training, high-level and large hospitals. Most hospitals implemented prevention practices of adverse drug events, in-facility pressure ulcers and falls (94.4-100.0%). But prevention practices of surgery/procedure related events had relatively low adoption rate (59.2-92.8%). Majority of prevention practices for patient safety events were also implemented with a relatively modest increase in resources allocated. Conclusion: The hospital-based reporting and learning system, EMRs, and core evidence-based prevention practices were implemented well in high-level and large hospitals. But POA indicator and PSO were not adopted in more than half of surveyed hospitals and implementation of prevention practices for specific event had low. To support and monitor progress in hospital's patient safety effort, national-level safety practices set is needed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.517-524
• /
• 2017

The objective of this research is to improve the efficiency of data collection from many machine components on smart factory floors using IoT(Internet of things) techniques and cloud platform, and to make it easy to update outdated diagnostic schemes through online deployment methods from cloud resources. The short-term analysis is implemented by a micro-controller, and it includes machine-learning algorithms for inferring snapshot information of the machine components. For long-term analysis, time-series and high-dimension data are used for root cause analysis by combining a cloud platform and multivariate analysis techniques. The diagnostic results are visualized in a web-based display dashboard for an unconstrained user access. The implementation is demonstrated to identify its performance in data acquisition and analysis for rotating machinery.

• Journal of Korean Society of Archives and Records Management
• /
• v.17 no.4
• /
• pp.87-107
• /
• 2017

Because of the creation and transfer of born-digital records, file unit-based record description practices have changed fundamentally. In this study, we analyzed the archival description practices of The National Archives (TNA) to maintain intellectual control in the digital records management environment and to support the access to records of users. TNA has created an archival description based on ISAD(G) but, for describing born-digital records, it changed the guideline for descriptive cataloging practices. As the method of ISAD(G) cannot adhere to born-digital records, the next-generation descriptive standard, Records in Contexts (RiC), is still being developed by ICA. In addition to international efforts, we need to build an archival description system that fits our environment, especially because since the year 2000, TNA's online cataloging system has changed and ISAD(G) has been modified in this process. This study also proposed continuous monitoring of digital archival descriptions, provides an integrated approach to analog records and digital content and strengthens experimentation and cooperation toward an uncertain digital future.

• Journal of the Korean Geographical Society
• /
• v.44 no.6
• /
• pp.706-722
• /
• 2009

This study aims to find the ways to correct and fix the errors in transcription by analyzing Romanization of Korean geographical names in foreign countries. The gazetteers from many countries, place name databases, and map-providing websites are the main source of research. Common error types found in this study are variant name posting, subordinated marking, double posting, spelling errors, and location errors. In fact, transcription of geographical names exhibits more diverse forms and types. The counter measures to fix these errors are as follows, firstly, consistent efforts with regular monitoring to fix errors are essential. Secondly, the one and only standardized Romanization principle is urgent. Thirdly, prompt update and publication in case of place name and/or boundary change is necessary. Fourthly, efforts to register unregistered geographical names are necessary. Lastly, the establishment of central agency solely for the management of geographical names is required.

• The Journal of Information Systems
• /
• v.14 no.3
• /
• pp.63-70
• /
• 2005

Compared with land logistics and sea logistics, air logistics takes not only less transportation time, but also makes just-in-time delivery possible. Because of this, in spite of high freight rates, many shippers make good use of airlines. To cope with borderless competition in this global age, most shippers using air logistics want to receive diverse information including just-in-time cargo delivery and dangerous situation as well as convenience and speed in job handling. Nevertheless, most domestic forwarders, who perform many kinds of important businesses for air logistics, mainly put emphasis on demanding information from overseas partners through their business agreements, that is, focusing on horizontal integration, instead of sharing information or improving job performance among air logistics participants. As a result, it is almost impossible to satisfy the needs of shippers. Airline users want to remove the uncertainties over their cargo movement. And in time of emergency, they want to take immediate measures through speedy information sharing and decision-making. In order to satisfy shipper's needs, all the organizations participating in the air logistics supply chain-cargo senders, cargo receivers, forwarders, transporters, licensed customs brokers, airlines as well as foreign partners-have to set up a vertical cooperation system. For effective air logistics SCM, it is very important to remove overlapping jobs, strengthen the efficiency of job handling, and provide online monitoring on cargo information in order to support decision-making. To this end, this paper has applied the concept of RTE (Real Time Enterprise), a new business management system, which tries to maximize competitiveness by removing many hindrance factors on an ongoing basis in managing and fulfilling core business processes based on up-to-the-minute information. In order to realize RTE-based information system for air logistics SCM, this paper has analyzed the information required by business process and by air logistics participant, and suggested the method for information sharing, point of time for information input and output, and its means.

• 전자공학회논문지 IE
• /
• v.48 no.1
• /
• pp.36-44
• /
• 2011

The purpose of this study was to develop the basic design principles for the engineering mathematics teaching model that supported college students to become collaborative problem solvers. For this purpose, the following four design principles were drawn from the steps of systems approach, especially with consideration of needs of engineering students, professors, curriculum and relevant research on mathematical education. As a result, the four design principles for the engineeering mathematics teaching model were drawn as follows: (1) Improve students' basic mathematical learning abilities through repetition and elaborative practice of the basic mathematical concepts and principles, (2) Develop students' problem solving abilities through collaborative projects or learning activities with peers, (3) Facilitate students' reflection and provide teacher's monitoring and prompt feedback during their learning process, and (4) Build up online learning environments that enable students to become self-regulated learners.