• Environmental Engineering Research
• /
• v.20 no.3
• /
• pp.298-305
• /
• 2015

The Standards for Water Works issued by the Korean government prescribed the insertion of inclined plates in a clarifier to enhance the settling of the suspended solids. In this study, in order to verify the role of the inclined plates, two identical laboratory-scale rectangular clarifiers were constructed and eight inclined plates were inserted into one of the clarifiers and inflow from same source was treated in both the clarifiers. Dye tests revealed that only the front three of the seven slots received the inflow at $0.57m^3/m^2{\cdot}h$, which was the highest SOR (surface overflow rate). Three different SORs, with 12 different SS (suspended solid) concentrations at each overflow rate, were fed to both clarifiers. However, the clarifier with the inclined plates failed to show an improved removal rate for the SS. In order to enable the Boycott effect within the slot, it is suggested that each slot created by the inclined plates receives equalized inflow. Moreover, collision of the inflow with the settled sludge at the bottom of the clarifier has to be avoided. These provisions, which can maximize the Boycott effect, should be added to the Standards for Water Works endorsed by Korean government.

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.524-530
• /
• 2010

Chloramphenicol is one of the most effective antibiotics for treatment of food-producing animals for typhoid fever. However, it has been reported that it caused severe side effects such as aplastic anemia in human, therefore the use of chloramphenicol for food-producing animal is prohibited by European Union and other countries. In this study, the analytical method using isotope dilution liquid chromatography-mass spectrometry (ID-LC/MS) was established for accurate determination of chloramphenicol in meat. Chloramphenicol was extracted with ethylacetate from porcine and solid phase extraction cartridge was used for enhancing the recovery. The residue of chloramphenicol in porcine was analyzed using the liquid chromatography mass spectrometer (LC/MS) interfaced with electrospray ionization source. Analysis was performed in negative mode with selected reaction mornitoring mode at m/z 321${\rightarrow}$257 of $[M-H]^-$ ${\rightarrow}$ $[M-H-(HCOCl)]^-$ and m/z 326 ${\rightarrow}$ 262 channels for its isotope. The established method was tested using fortified samples at the level of 0.2 1, 10, $25\;{\mu}g$/kg and analytical results agreed with the gravimetrically fortified values within their uncertainties. This method was validated by analyzing a certified reference material, BCR 445, from IRMM (Institute for Reference Materials and Measurement). Our measurement values agreed with the certified value within their uncertainties. The uncertainty of our measured value was much lower than that the certified value from IRMM.

• Wind and Structures
• /
• v.1 no.4
• /
• pp.303-315
• /
• 1998

Full-scale measurements have been made to determine the increase in wind speed over two exposed embankments, one of $23^{\circ}$ slope and 4.7 m in height, the other of $24^{\circ}$ slope and 7.3 m in height. Measurements were made at heights of 5, 10 and 15 m above the upper edge of each embankment and at the same heights approximately 100 m upwind in the lower-level approach fetch. Despite the modest sizes of the embankments, the maximum recorded increase in mean wind speed was 28% and the minimum was 13%; these increase relate to increases in wind loads on structures erected at the top of the embankments of 64% and 28% respectively. The associated increases in gust speeds are estimated at 33% and 18%, which imply increases in gust loading of 77% and 39% respectively. These experimental results are compared with predictions obtained from a computational fluid dynamics (CFD) analysis, using three high Reynolds number eddy-viscosity models and estimates from the UK wind loading code, BS 6399: Part 2. The CFD results are generally in agreement with the experimental data, although near-ground effects on the embankment crest are poorly reproduced.

• Journal of Environmental Health Sciences
• /
• v.38 no.3
• /
• pp.233-240
• /
• 2012

Objectives: The changes in atmospheric $PM_{2.5}$ concentrations were extensively studied in one metropolitan city (Incheon), two small and medium sized cities (Gunsan, Cheonan), and a rural area (Gosan in Jeju). The concentrations of heavy metals (Cr, Mn, Fe, Ni, Cu, Zn, Al, Pb) and the component features of $PM_{2.5}$ were determined for these areas. Methods: This study sampled $PM_{2.5}$ at the designated locations in the metropolitan (Incheon), small and medium sized cities (Gunsan in Jeonbuk and Cheonan in Chungnam), and rural area (Gosan in Jeju) to investigate concentrations with a sampling device (Sequential sampler, APM Eng., Korea). Sampling was undertaken over months, from June 26 to November 26, 2009. Sampling was conducted a total of 44 times, with routine sampling at intervals of six days (24 total times) and intensive sampling (20 total times) during the summer and fall. Mass concentration of $PM_{2.5}$ was evaluated and the concentrations of heavy metals (Cr, Mn, Fe, Ni, Cu, Zn, Al, Pb) were analyzed. Results: The geometric average of concentrations of $PM_{2.5}$ per district was $35.289{\mu}g/m^3$ for Cheonan, $29.955{\mu}g/m^3$ for Incheon, $24.119{\mu}g/m^3$ for Gunsan, and $18.773{\mu}g/m^3$ for Jeju, respectively. The average concentration of $PM_{2.5}$ in Cheonan was the highest. The seasonal concentration distributions per district showed Cheonan $33.387{\mu}g/m^3$, Incheon at $31.550{\mu}g/m^3$, Gunsan $22.900{\mu}g/m^3$, and Jeju $18.900{\mu}g/m^3$ in the summer. For the autumn, the concentrations were $36.873{\mu}g/m^3$ in Cheonan, $28.625{\mu}g/m^3$ in Incheon, $25.227{\mu}g/m^3$ in Gunsan, and $18.667{\mu}g/m^3$ in Jeju. According to the collected data, the concentration showed a tendency to rise during the autumn in all of these regions with the exception of Incheon. For heavy metal distribution per district, Fe showed an elevated concentration during the summer while high concentrations of Pb and Zn occurred during the autumn. Conclusion: These results demonstrated that atmospheric factors affected the concentrations of heavy metals. The results of this study could be used as foundational data for setting environmental air standards focusing on a $PM_{2.5}$ receptor.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.369-375
• /
• 2017

In this paper, we present a self-adaptive software platform that enables an IoT gateway to perform autonomous operation considering IoT devices connected each other in resource-constrained environments. Based on the oneM2M device software platform publicly available, we have designed an additional part, called SAS (self-adaptive software) consisting of MAM (memory-aware module), NAM (network-aware module), BAM (battery-aware module), DAM (data-aware module), and DH (decision handler). A prototype system is implemented to show the feasibility of the proposed self-adaptive software architecture. Our proposed system demonstrates that it can adaptively adjust the operation of gateway and connected devices to their resource conditions under the desired service scenarios.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.247-248
• /
• 2019

본 논문에서는 블루투스 비콘을 이용해 고소 작업장 등의 위험지역에서 작업자 추적 및 확인과 안전 벨트고리를 체결했는지 여부와 작업자의 행동에 따른 데이터를 추가로 수집하여 작업자의 행동 패턴을 분석하였다. IoT 국제 표준인 oneM2M을 기반으로 IoT Device와 Application을 연결하는 중간 매개체로 모비우스 플랫폼을 사용해 시스템을 구축하였다. 또한, 본 연구팀의 선행 연구에서 작업자 위험 행동분류 시스템을 개선할 수 있는 연구 결과를 비교하였다.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.153-160
• /
• 2010

We modified the optical system of 500 mm wide-field telescope of which point spread function showed an irregularity. The telescope has been operated for Near Earth Space Survey (NESS) located at Siding Spring Observatory (SSO) in Australia, and the optical system was brought back to Korea in January 2008. After performing a numerical simulation with the tested value of surface figure error of the primary mirror using optical design program, we found that the surface figure error of the mirror should be fabricated less than root mean square (RMS) $\lambda$/10 in order to obtain a stellar full width at half maximum (FWHM) below $28\;{\mu}m$. However, we started to figure the mirror for the target value of RMS $\lambda$/20, because system surface figure error would be increased by the error induced by the optical axis adjustment, mirror cell installation, and others. The radius of curvature of the primary mirror was 1,946 mm after the correction. Its measured surface figure error was less than RMS $\lambda$/20 on the table of polishing machine, and RMS $\lambda$/15 after installation in the primary mirror cell. A test observation performed at Daeduk Observatory at Korea Astronomy and Space Science Institute by utilizing the exiting mount, and resulted in $39.8\;{\mu}m$ of stellar FWHM. It was larger than the value from numerical simulation, and showed wing-shaped stellar image. It turned out that the measured-curvature of the secondary mirror, 1,820 mm, was not the same as the designed one, 1,795.977 mm. We fabricated the secondary mirror to the designed value, and finally obtained a stellar FWHM of $27\;{\mu}m$ after re-installation of the optical system into SSO NESS Observatory in Australia.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.351-356
• /
• 2014

Generally, although securing the condition and location of container freights or normal freights, which load a fresh goods, has been a very important issue in the cold-chain system implementations, it has not gotten out of the traditional methods in the related business world yet. To solve this problem, we propose the designing method and architecture which can be used to implement a smart cold-chain monitoring automation systems. The proposed system architecture is based on the oneM2M standards, and it has 3 layers and entities, which can be implemented to S/W and H/W, network services layer and entity, common services layer and entity, application layer and entity. Based on this architecture, we will not only expect an innovative retrenchment of distribution cost, but also automatically secure the freight condition and location.

• The KIPS Transactions:PartC
• /
• v.17C no.2
• /
• pp.145-152
• /
• 2010

In this paper, we first propose a fast division algorithm in GF($2^{163}$) using standard basis representation, and then it is mapped into divider for GF($2^{163}$) with iterative hardware structure. The proposed algorithm is based on the binary ExtendedGCD algorithm, and the arithmetic operations for modular reduction are performed within only one "while-statement" unlike conventional approach which uses two "while-statement". In this paper, we use reduction polynomial $f(x)=x^{163}+x^7+x^6+x^3+1$ that is recommended in SEC2(Standards for Efficient Cryptography) using standard basis representation, where degree m = 163. We also have implemented the proposed iterative architecture in FPGA using Verilog HDL, and it operates at a clock frequency of 85 MHz on Xilinx-VirtexII XC2V8000 FPGA device. From implementation results, we will show that computation speed of the proposed scheme is significantly improved than the existing two approaches.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.2
• /
• pp.331-341
• /
• 2018

Hazardous air pollutants(HAPs) in the atmosphere are regulated as major air pollutants in Korea by the Air Pollution Control Act. In order to manage and control HAPs, accurate standards, which are traceable to the International System of Units(SI), are required. In this study, primary standard gas mixtures(PSMs) of volatile organic compounds(VOCs) which are specified as HAPs were developed at $1{\mu}mol/mol$ levels. The selected fourteen VOCs include Benzene, Toluene, Ethylbenzene, m-Xylene, Styrene, o-Xylene, Chloroform, 1,1,2-Trichloroethane, Trichloroethylene, Tetrachloroethylene, 1,1-Dichloroethane, Carbon tetrachloride, 1,3-Butadiene, and Dichloromethane. The HAPs PSMs were gravimetrically prepared in aluminum cylinders and their consistency was verified within the relative expanded uncertainty of 0.71% (k=2). Potential adsorption loss onto the internal surface of cylinders was estimated by cylinder-to-cylinder division method. No adsorption loss was observed within the uncerainty of 0.53%. The long-term stability of the HAPs PSMs was evaluated comparing with freshly prepared HAPs PSMs. The HAPs PSMs were stable for one year within the uncertainty of 0.38%. The final uncertainty of the PSMs was determined by combining the preparation uncertainty, verification uncertainty, and stability uncertainty. Finally, traceable and stable HAPs PSMs at $1{\mu}mol/mol$ levels were developed with the uncertainty of less than 0.76% in high-pressure aluminum cylinders.