• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1976

One of the most common needle leaf species used in planting in Korea is korean pine (Pinus koraiensis S. et Z.), and jack pine (Pinus banksiana Lamb.) is one of the test species for suitability. The relation of nursery bed density of 2-1 korean pine and 1-1 jack pine was studied at the Kwang Nung Nursery, Central Branch Station of Forest Research Institute, and about 40km north of Seoul. Nursery bed density of 2-1 korean pine, which ranged from 36 to 324 trees per square meters and of 1-1 jack pine, which ranged from 25 to 169 trees per square meters, had a marked effect on caliper, height, dry weight and percent and amount of plantable stock. The soil physical and chemical properties is silt plus clay, 50.55 percent; organic matter, 2.09 percent; total nitrogen, 0.13 percent; available phosphorus, 253.25 ppm; exchangeable potash, 0.46 m.e/100g; and pH, 5.58. As the density of the nursery seedling stand of 2-1 korean pine increases, the average tree height increases (Fig. 1A), but in 1-1 jack pine density do not affect to increase or decrease the average tree height. As the density of nursery bed increases, the average stem caliper (at 2cm above ground line) and dry weight decrease (Fig. 1B), but the decreasing rate is more seriously in 1-1 jack pine than 2-1 korean pine (Fig.5). As increasing the density of nursery bed, the T/R ratio of trees of the test species increase. Also the dry weight of leaf, stem and root parts are decreasing in proportion to the increase of stand density, but the drop rate of jack pine is more rapid than korean pine (table. 1) The patent facts of difference of growth characteristics between 2-1 korean pine and 1-1 jack pine were studied. These facts should be used to select the scale of stand density at the nursery bed or the plantable site. Korean pine is demanded high density, on the other hand in jack pine low density are more suitable to manage the stand density. Stands of comparatively low density had the greatest percentage of high-quality stock, and the stands of high density had less than the high quality trees of low density. An important criterion of the best density is percent and number of high-quality trees produced per square meter of bed area. Stem caliper and stem height of seedling is used in most public nurseries to sort seedling into plantable grades. The stock grade standard has set at 4.5mm caliper and 16cm height of 2-1 korean pine as the minimum desired stem caliper and height. By the result studies, the plantable stock grade standards of 2-1 korean pine used at stem height 16cm and stem caliper 4.5mm from public nurseries should be reformed to stem height 18cm and stem caliper 4.0mm by the growth characteristics and the tree distribution of stem height and caliper of relation to density. For the 2-1 korean pine, best density should be about 160 to 200 trees per square meter according to soil fertility. For the 1-1 jack pine, the suitable standard of plantable stock should be at stem height 25cm and caliper 6mm (at 2cm above ground line) and best density was about 100 to 120 trees.

• Journal of Preventive Medicine and Public Health
• /
• v.46 no.4
• /
• pp.192-200
• /
• 2013

Objectives: To measure the prevalence of behavioural risk factors for obesity among urban adolescent school children in Chennai, India. Methods: This study was performed as a cross-sectional study using a World Health Organization-designed Global School-based Student Health Survey questionnaire (modified for India) among adolescent school children studying in 30 randomly selected secondary and higher secondary schools in Chennai city. 1842 adolescents studying in the VIII to XII standards were randomly selected for the study. Results: In the present study, 40.7% of the students ate fruit one or more times per day and 74.5% of the students ate vegetables one or more times per day. Nearly 20% of the students ate fast food items on 4 to 7 days during the previous week. Among the students, 30.4% watched television for more than two hours per day. Nearly 68% of the girls and 22% of the boys did not participate in outdoor sports activities. When the pattern of physical activity of the students was assessed, it was observed that 15.6% were inactive, 43.4% were minimally active, and the remaining 41.0% belonged to the category of health enhancing physical activity. Among the students, 6.2% were overweight and 5.2% were obese. Conclusions: The prevalence of risk factors for obesity was quite high among the adolescents. This study also showed that a great proportion of overweight/obese adolescents had a correct perception of their body weight and they were making efforts to modify risk factors such as television viewing, computer use, a sedentary lifestyle, and unhealthy dietary habits.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.4 no.1
• /
• pp.10-17
• /
• 2001

Purpose: We measured anti-H. pylori IgG in Korean elementary school children living in Shinchon area of Seoul, Korea to evaluate the influence of environmental living standards on H. pylori infection. Methods: IgG antibodies to H. pylori were measured in plasma using a commercial ELISA kit (GAP IgG Helicobacter pylori, Bio-Rad Laboratories Inc., Hercules, CA, USA). Information on environmental status such as place of birth, parental income, type of housing, number of persons in the household, parents' occupation, family history of peptic ulcer disease and gastric cancer was obtained. Statistical analysis was done by Chi-square and logistic regression test using SPSS $7.0^{TM}$ for Windows. Results: Study subjects consisted of 571 children, and the age distribution ranged from 6.0 to 13.6 years with a mean of $9.6{\pm}1.8$ years. Male-to-female ratio was 1.1:1. The seropositive rates of H. pylori infection ranged from 10.4% in children aged 6 years to 30.9% in 12 year-old group, overall 16.8%. The prevalence of H. pylori infection progressively increased with age, but there was no significant difference in seropositive rates among children in different age groups (p=0.06). Seropositive rates of anti-H. pylori IgG on the basis of gender, place of birth, parental income, type of housing, parents' occupation, family history of peptic ulcer disease and gastric cancer showed no statistically significant difference. Interestingly, however, seropositive rate of anti-H. pylori IgG showed statistical significance in relation to number of persons in the household (p=0.003; Odds ratio 1.50 by logistic regression test). Conclusion: These results suggest that number of persons in the household is the most important factor among environmental living standards, and that risk of H. pylori infection increases by increment of 1.5 times as the number of persons in the household increases by one.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.196-208
• /
• 1998

To improve the quality of environmental measurements and evaluation of the workplace air in the pigment manufacturing industries, we analyzed metal(chromium, cadmium, lead, iron, cobalt, manganese, antimony, titanium, arsenic, and selenium) concentrations by ICP-AES in sixty seven samples of inorganic bulk pigments which are produced and/or used in Korea. We also collected MSDS which has to be supplied by manufacturer and/or supplier and posted in the workplace according to the Hazard Communication Standards, and compared the number of metals listed in each MSDS with the number of metals determined by ICP-AES. Results were as followed; 1. Among seventeen yellowish-colored samples, chromium(2~19%) and lead(0.1~61%) were the two major metals. In thirteen reddish-colored samples, iron was the major component with 37~81%. Cobalt and manganese were detected in blue-colored samples with less than 1%, while antimony and titanium were the major two metals in white-colored pigments with 178~300 ppm and with 36~65%, respectively. 2. In area samples collected in workplace air(one pigments producing factory and five retailer stores), iron and manganese were detected but the concentrations not exceeded the TLVs(1 and $5mg/m^3$, respectively). In three of fifteen samples, the concentrations of lead exceeded the TLV ($0.05mg/m^3$). 3. Two out of seven companies provided MSDS, and the average provision rate was 22.4%. And the coincidence rate of the number of metals referenced in MSDS and determined by ICP-AES mostly accorded, but in one sample, different metal was detected from MSDS. In summary, metals have to be concerned in evaluation of the workplace air dealing with compounds of inorganic pigments dust are cobalt, chromium, iron, manganese, lead and antimony, and these are simultaneously determined by ICP-AES. Taking this opportunity, it is needed to reinforce that the personnel is to be concerned about prevention of workers' ill health regarding to provision of MSDS.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.33-43
• /
• 2022

The number of car crashes increases along with the increasing number of vehicles. Hence, diverse initiatives on traffic accidents have been implemented, targeting zero crash fatalities. According to the 3rd Traffic Safety Master Plan of 2016, the current standard selecting road accident black spots prioritizes locations with the high cumulative death toll. While this standard is suitable for roads that a city government manages to some extent, it is not suitable for roads less than 20 meters that a borough (Gu) handles. The roads under the supervision of a borough do not have enough death toll, and thus improvements on its road accident black spots are highly limited. In addition, discovering the causes of traffic accidents is not easy when the number of car accidents is obtained by considering only fatal accidents, which are relatively low in number. Therefore, including all traffic accidents might identify causes of accidents and result in better advancements. Therefore, this research follows rational decision-making and suggests new National Traffic Safety Master Plan standards. These new standards are obtained by comparing accident costs between the location of fatal crashes and road accident black spots. The analysis result shows that considering all types of accidents yields better results. For example, a Three-way Intersection in front of Zion Day Care Center, one of the selected spots under the current standard, has lower road crash costs than Sinchon Intersection, a selected spot under a new standard. Therefore, the study concludes that the standards to select road accident black spots need to include traffic accident severity and road crash costs.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.399-404
• /
• 2018

The purpose of this study was to evaluate the accuracy of a mobile wireless digital automatic blood pressure monitor for clinical use and mobile health (mHealth). In this study, a manual sphygmomanometer and a digital blood pressure monitor were tested in 100 participants in a repetitive and sequential manner to measure blood pressure. The guidelines for measurement used the Korea Food & Drug Administration protocol, which reflects international standards, such as the American National Standard Institution/Association for the Advancement of Medical Instrumentation SP 10: 1992 and the British Hypertension Society protocol. Measurements were generally consistent across observers according to the measured mean ${\pm}SD$, which ranged in $0.1{\pm}2.6mmHg$ for systolic blood pressure (SBP) and $0.5{\pm}2.2mmHg$ for diastolic blood pressure (DBP). For the device and the observer, the difference in average blood pressure (mean${\pm}$SD) was $2.3{\pm}4.7mmHg$ for SBP and $2.0{\pm}4.2mmHg$ for DBP. The SBP and DBP measured in this study showed accurate measurements that satisfied all criteria, including an average difference that did not exceed 5 mmHg and a standard deviation that did not exceed 8 mmHg. The mobile wireless digital blood pressure monitor has the potential for clinical use and managing one's own health.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of Biomedical and Translational Research
• /
• v.19 no.4
• /
• pp.79-85
• /
• 2018

Echocardiography is one of the most useful diagnostic techniques for differentiating heart disease as well as mitral valve lesion. Forty client-owned small breed dogs (weight, 2.3-13.2 kg) aged between 8-17 years with myxomatous mitral valve degeneration (MMVD) were included in the present study. The diagnosis of MMVD in dogs was made based on the clinical signs, chest radiography data, and echocardiographic findings. Echocardiographic examinations were conducted in accordance with recommended standards for dogs. M-mode, Doppler, and 2D echocardiography were performed in left and right lateral recumbency. 2D echocardiography was used to measure LA and Ao diameter from 2D short axis at the level of the aortic valve. In the comparison of conventional echocardiography indices in dogs with different stages of heart failure with MMVD, significant differences were observed in E/A ratio (p=0.005), EDV (p<0.001), EDVI (p<0.001), E-peak velocity (p= 0.001), ESV (p=0.028), ESVI (p=0.004), LA (p<0.001), LA/Ao Ratio (p<0.001), LVIDd (p<0.001), LVIDd/Ao Ratio (p<0.001), LVIDs (p=0.036), LVIDs/Ao Ratio (p=0.002), and MR Velocity (p=0.026). In addition, distinct correlations were found in EDV (r=0.712), LA/Ao ration (r=0.830), LVIDd (r=0.724), and LVIDd/Ao ratio (r=0.759). This study found that known conventional echocardiographic indices, including EDV, LA/Ao ratio, LVIDd dimension, and LVIDd/Ao ratio correlated with the severity of MMVD in point of significant differences and distinct correlations.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.3 no.1
• /
• pp.86-93
• /
• 2003

Background : The SCL began screening of newborns and high risk group blood spots with tandem mass spectrometry (MS/MS) in April 2001. Our goal was to determine approximate prevalence of metabolic disorders, optimization of decision criteria for estimation of preventive effect with early diagnosis. This report describes the ongoing effort to identify more than 30 metabolic disorders by MS/MS in South Korea. Methods : Blood spot was collected from day 2 to 30 (mostly from day 2 to 10) after birth for newborn. Blood spot of high risk group was from the pediatric patients in NICU, developmental delay, mental retardation, strong family history of metabolic disorders. One punch (3.2 mm ID) of dried blood spots was extracted with $150{\mu}L$ of methanol containing isotopically labelled amino acids (AA) and acylcarnitines (AC) internal standards. Butanolic HCl was added and incubated at $65^{\circ}C$ for 15 min. The butylated extract was introduced into the inlet of MS/MS. Neutral loss of m/z 102 and parent ion mode of m/z 85 were set for the analyses of AA and AC, respectively. Diagnosis was confirmed by repeating acylcarnitine profile, urine organic acid and plasma amino acid analysis, direct enzyme assay, or molecular testing. Results : Approximately 31,000 neonates and children were screened and the estimated prevalence (newborn/high risk group), sensitivity, specificity and recall rate amounted to 1:2384/1:2066, 96.55%, 99.98%, and 0.73%, respectively. Confirmed 28 (0.09%) multiple metabolic disorders (newborn/high risk) were as follows; 13 amino acid disorders [classical PKU (3/4), BH4 deficient-hyperphenylalaninemia (0/1), Citrullinemia (1/0), Homocystinuria (0/2), Hypermethioninemia (0/1), Tyrosinemia (1/0)], 8 organic acidurias [Propionic aciduria (2/1), Methylmalonic aciduria (0/1), Isovaleric aciduria (1/1), 3-methylcrotonylglycineuria (1/0), Glutaric aciduria type1 (1/0)], 7 fatty acid oxidation disorders [LCHAD def. (2/2), Mitochondrial TFP def. (0/1), VLCAD def. (1/0), LC3KT def. (0/1). Conclnsion : The relatively normal development of 10 patients with metabolic disorders among newborns (except for the expired) demonstrates the usefulness of newborn screening by MS/MS for early diagnosis and medical intervention. However, close coordination between the MS/MS screening laboratory and the metabolic clinic/biochmical geneticists is needed to determine proper decision of screening parameters, confirmation diagnosis, follow-up scheme and additional tests.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.35-43
• /
• 2012

The Government is implementing the safety measures for pedestrian in living zone to decrease the traffic accident casualties in half. It is urgently to study the guideline because it contains to make the guideline of a median strip in City to prevent the violation of central line and jaywalking on the main contents. So, this study analyzed the pedestrian accidents and the violation of central line, and studied the type of a median strip, the installation guideline through studying the minimum crossing. Consequently, this study found out that a median strip which revised the attention inducement stick to decrease jaywalking could not have the strong prevention function of a crash barrier, so if it happens separation after the collision between vehicles, it induced the secondary accidents, and could take negative effects on traffic safety. In consideration of driving safety, this study analyzed that if it installs a median stirp, it has to ensure one meter, and such a thing could prevent the separation of lane or damage of facilities. However, if it is hard to ensure the space because of narrow road width, it could install a median strip in case of installing the road surface mark 0.5m. And the installation of the attention inducement stick or a median strip on the central line could be possible to induce the violation of central line, thus it is desirable not to install only anythings but also raised pavement markers.