• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.271-278
• /
• 2001

Many workers in the garlic peeling factory are separating the sound peeled garlics from the unpeeled and defective ones in a manual way. In order to reduce the seasonal labor requirement and operating cost, the mechanized garlic sorting system such as the vision-based garlic sorter should be developed. This study was conducted as one of basic studies on developing quality evaluation technique for peeled garlics, especially to developed the system for acquiring the whole surface images of garlics with a CCD camera. The following results were obtained from this study. 1. The belt-type garlic rotation system was devised to apply for the vision-based garlic sorter and was tested to decide the criteria of design and optimum conveying speed. 2. To evaluate the performance of the developed garlic rotation system, feeding rate and rotating rate were measured under the conditions of four experimental factors such as the inclined angle of rotating belt, the inclined angle of feeding belt, the height of plate arrays on feeding belt and the conveying speed of belts. And the capacity of the system according to mixture ratios of peeled garlics and unpeeled garlics was analyzed as a feasibility test. 3. For the inclined angle of rotating belt 20°and height of plate array on feeding belt 22㎜, the maximum rotating rate for garlic samples including unpeeled ones was 81.1% at the conveying speed of 4.2 garlic/sec. And under these condition, the maximum feeding rate was 85% at the inclined angle of feeding belt 6.5°. 4. The capacity of the developed garlic rotation system was almost constant regardless of mixture ratio of peeled garlics and unpeeled garlics and its range was 2.95∼3.92 garlic/sec. At the conveying speed of 4.2 garlic/sec, the capacity of the garlic rotation system was calculated ad 58∼64 kg/hr. 5. To improve performance of the garlic rotation system, it is recommended to develop a device to slide garlics into feeding belt.

• The Journal of Korean Physical Therapy
• /
• v.29 no.1
• /
• pp.33-38
• /
• 2017

Purpose: This study was conducted to investigate the effects of variations in arm swing during gait on movement of the trunk and pelvis. During the gait task, the angle of the trunk and pelvic rotation were analyzed according to arm swing conditions. Methods: Seventeen healthy males participated in this study. All subjects were analyzed for gait on a treadmill three times each under three different types of arm swing conditions - natural arm swing, restricted arm swing using a phone, restricted swing in both arms. 3-D motion analysis systems were used to collect and analyze the kinematic data of trunk and pelvic movements, and repeated one-way ANOVA was used to compare the trunk and pelvic kinematic data and symmetry index. The level of significance was ${\alpha}=0.05$. Results: The results showed kinematic differences in trunk and pelvic during gait based on the arm swing conditions. Specifically, there were significant differences in trunk rotation, left and right trunk rotation and symmetry index of trunk rotation during gait among the three arm swing conditions. ROM was used to calculate a symmetry index (SI) based on the average left and right trunk rotation in which a value closer to zero indicated better balance. The SI obtained for arm swing restricted with the phone was closer to -1 than the other conditions. Conclusion: Restricted arm swing due to use of a phone had the possibility to induce instability of postural control while walking, which could be seen to suggest a risk of falling during gait.

• PNF and Movement
• /
• v.18 no.2
• /
• pp.255-263
• /
• 2020

Purpose: The purpose of this study was to investigate the effect of proprioceptive neuromuscular facilitation (PNF) lower extremity pattern on the dominant leg on muscle activity of the lower extremity supported by the ground. Methods: The subjects were 20 healthy males living in Busan. All subjects performed four direction PNF lower extremity patterns, and data were collected by surface electromyography from the gluteus medius (GM), tensor fascia latae (TFL), vastus medialis oblique (VMO), vastus lateralis oblique (VLO), and semitendinosus (STD) muscles of the opposite lower extremity during PNF lower extremity pattern. The PNF lower extremity pattern applied to the dominant leg was (1) flexion/adduction/external rotation with knee flexion; (2) extension/abduction/internal rotation with knee extension; (3) flexion/abduction/internal rotation with knee flexion; and (4) extension/adduction/external rotation with knee extension pattern, repeated 3 times per pattern and using the average value of the collected results. Collected muscle activity values were analyzed by one-way ANOVA, and post-hoc Tukey testing was performed to check between-group differences. The statistical significance level was set at α = 0.05. Results: GM and TFL flexion/abduction/internal rotation pattern with knee flexion was significantly higher than other patterns. VMO and VLO extension/adduction/external rotation pattern with knee extension was significantly higher than other patterns. STD flexion/adduction/external rotation pattern with knee flexion was significantly higher than other patterns. Conclusion: The study confirms differences in lower extremity muscle activity for the PNF lower extremity pattern, indicating that selective muscle contraction induction is possible using a pattern appropriate to the purpose of treatment.

• International Journal of Aerospace System Engineering
• /
• v.8 no.1
• /
• pp.1-13
• /
• 2021

Contra-rotating fan is comprised of two rotors which are rotating in the opposite direction. The fan stages are named rotor-1 and rotor-2. Benefits from the use of contra rotation are in terms of better efficiency and improved thrust to weight ratio. Failure of contra-rotating fan stage blade in-service results in safety risks, repair costs, and revenue losses. This paper focuses on the vibration analysis and one way fluid-structure interaction of high aspect ratio, low speed contrarotating fan rotors. Modal analysis and modal pre-stress analysis of contra-rotating fan rotors were carried out to calculate the natural frequencies, One way fluid-structure interaction (FSI) was carried out where the computational analysis of the blades was performed using ANSYS CFX. The boundary conditions for CFD analysis were considered from the actual experimental velocity flow field at the inlet and pressure outlet. Based on the results obtained from the CFD analysis, the structural analysis such as deformation and Von-Misses stresses was carried out by using the finite element method (FEM) with ANSYS. The results provide necessary guidelines for the safe running of the contra-rotating fan. The analysis also will be helpful to understand the change of flow behavior due to a rotor deformation.

• Physical Therapy Korea
• /
• v.24 no.4
• /
• pp.29-37
• /
• 2017

Background: The serratus anterior (SA) muscle is one of the important muscles in the upward rotation of the scapula when the arm is raised. Insufficient muscle activity of the SA can cause deformation of the shoulder rhythm resulting in shoulder pathology. Objects: This study intends to compare SA and upper trapezius (UT) activity during the conventional wall-slide and push-up plus exercises for SA muscle strengthening and the scapular upward rotation (SUR) exercise. Methods: A total of 30 subjects participated in this study, and we measured the muscle activity of the SA and UT muscles during the wall-slide, push-up plus and SUR exercises. The one-way repeated ANOVA was used to compare SA and UT muscle activities during the 3 exercises. Results: During the SUR exercise, SA muscle activity was 79.88% maximum voluntary isometric contraction (MVIC), which was significantly higher than its activity during the other 2 exercises. The UT muscle activity was 47.53 %MVIC during the SUR exercise, indicating a significantly higher UT muscle activity than during the other 2 exercises. Conclusion: These findings suggest that the SUR exercise can maximize SA muscle activity to strengthen the SA while keeping UT muscle activity at an appropriate level.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1089-1103
• /
• 2000

A Problem of relevant interest to some industries is that of obtaining optimum two-dimensional layout. To solve this provlem, one is given a number of rectangular sheets and an order for a specified number of each of certain types of two-dimensional regular and irregular shapes. The aim is to cut the the shapes out of the sheets in such a way as to minimize the amount of waste produced. A DCS (Distributed Control System) is an integrated system which applies the decentralization concept to a control system handling both sequential and analog control. A DCS performs many operations such as data gathering, data processing, data storing and monitoring the operatin conditions for the operator. IN this paper, we propose a genetic algorithm based on rotation parameters from which the best pattern of layout is found as well as a layout method for better performance time. A DCS for the plate cutting process system, which is performed by a virtual system, is also identified.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.86.1-86.1
• /
• 2011

Most astrophysical systems are turbulent and magnetized. Magnetic field plays an important role in the dynamics of ISM and influence all of properties of astrophysical system. Information of magnetic field is very important to understand properties of astrophysical systems. For example, one way to obtain information of magnetic field is to use Rotation Measure. Mean strength of the magnetic field along the line of sight can be estimated from RM/DM. (where RM is rotation measure, DM is dispersion measure) For the estimation of magnetic field strength using RM/DM, the correlation between density and magnetic field is very important. When there is no correlation between density and magnetic field the relation gives exact mean magnetic field strength. But, if the correlation is positive, it overestimates the magnetic field strength, while if the correlation is negative, it underestimate the strength. We calculate correlation between density and magnetic field in compressible MHD turbulence.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.481-488
• /
• 1998

Elastomeric bearing is used as one of the most useful way for isolation structures, because the horizontal stiffness is much lower than the vertical stiffness. In the design criteria of Elastomeric bearing, the stability of the bearings is evaluated by shear strain due to compression, lateral displacement, and rotation. The question how soft rubber can sustain heavy structure is now able to be solved by Ultimate capacity test of Laminated Elastomeric Bearings, which results 1,200kg/$\textrm{cm}^2$ of the max. compressive stress and this shows what a sufficient safety factor Elastomeric bearing has !

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.107.2-107.2
• /
• 2011

Most astrophysical systems are turbulent and magnetized. Magnetic field plays an important role in the dynamics of astrophysical system and influence all of properties of astrophysical system. Therefore, information of magnetic field is very important to understand properties of astrophysical system. One way to obtain information of magnetic field is to use rotation measure. Mean strength of the magnetic field along the line of sight can be estimated from RM/DM, where RM is rotation measure and DM is dispersion measure. For the estimation of magnetic field strength using RM/DM, the correlation between density and magnetic field. When there is no correlation between density and magnetic field the relation gives exact mean magnetic strength. But if the positive correlation, it overestimates the magnetic field strength, while if the correlation is negative, it underestimate the magnetic field strength. In general, the ICM (intracluter medium) and the ISM (interstellar medium) cases, viscosity has a value greater than magnetic diffusion. We performed compressible MHD turbulence simulations and we studied correlation between density and magnetic field in different values of viscosity and magnetic diffusion. In most cases, we found weak or negative relations between the density and magnetic fields. We discuss implication of our results.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.3
• /
• pp.80-86
• /
• 2022

Objective: The purpose of this study was to investigate the effects of three rotational jump conditions (standing jump, left rotational jump and right rotational jump) on stability through center of pressure (COP) and EMG variables analysis. Method: A total of 16 college students (age: 24.13 ± 7.17 years, height: 169.24 ± 8.23 cm, weight: 65.65 ± 13.88 kg) participated in this study. The study used wireless two COP plates and wireless eight channel EMG. The analyized variables were 11 variables for COP and RMS for EMG, which were analyzed using one-way analysis of variance with repeated measures according to three rotational jump conditions. Results: Among the COP variables, left rotational jump (LRJ) and right rotational jump (RRJ) were larger than standing jump (SJ) for left and right amplitude, area, total displacement, and average velocity for both feet among the variables of COP, and for area of the left foot, RRJ was larger than that of SJ. Among the EMG variables, there was no statistical difference between the muscle activations, but the muscle activity was significantly higher in the order of RRJ, LRJ, and SJ according to direction of rotation. Conclusion: Although the results of COP and EMG were not consistent through this study, it can be expected that the differences in COP was due to the amount of rotation during rotational jump-landing in the left and right directions, and that the EMG is determined by the lateral movements required for rotation.