• 제목/요약/키워드: one-way measurement

검색결과 533건 처리시간 0.03초

수온 모니터링 기능을 탑재한 심장마비 방지용 목욕 보조 시스템 (Development of a Bath Assistive System with Water Temperature Monitoring to Prevent Heart Attack)

  • 강소명;웨이췬
    • 한국멀티미디어학회논문지
    • /
    • 제22권2호
    • /
    • pp.242-249
    • /
    • 2019
  • Old people and patients with cardiovascular disease could die of a heart attack in the bath with heated water for a long time. Various researches have been studied to prevent these accidents from happening such as measuring the ECG signal when taking bath. However, these devices are hard to use and the higher price is not easily accepted by the public. In this paper, a low-cost and use-friendly, real time high precision water temperature monitoring device to prevent heart attack in the bath was developed. The device with waterproof design that lets the device can float on the surface of the water, and an accurate way to make water temperature measurement method was proposed by this paper that is immerging the sensor into water with 4cm depth to measure the temperature of underwater. The manufactured device was conducted to two experiments; one was to verify the basic functions of the device, and another one was for compare the proposed device with commercial products for monitoring the water temperature in the bathtub. As the experimental results shown, the proposed device has stable performance for the water temperature measurement and communicating with laptop in wireless.

OpenRISC 코어의 성능향상을 위한 캐쉬 구조 설계 (Cache Architecture Design for the Performance Improvement of OpenRISC Core)

  • 정홍균;류광기
    • 대한전자공학회논문지SD
    • /
    • 제46권1호
    • /
    • pp.68-75
    • /
    • 2009
  • 최근 마이크로프로세서의 성능이 빠르게 향상됨에 따라 주 메모리의 접근 시간이 증가하고 있어 캐쉬의 필요성이 증대되고 있다. 직접사상 캐쉬는 주 메모리의 각각의 블록이 하나의 캐쉬 라인에 사상되는 구조로서 사상되는 규칙이 간단하지만 서로 다른 블록이 하나의 캐쉬 라인에 사상될 경우 블록의 충돌에 의한 접근 실패율이 집합연관 캐쉬에 비해 높아진다. 본 논문에서는 OpenRISC 코어의 직접사상의 단점을 개선하기 위해 사원 집합연관 캐쉬 구조를 제시한다. 제시한 캐쉬는 주 메모리의 네 개의 블록이 하나의 캐쉬 라인에 사상되는 구조로서 직접사상 캐쉬에 비해 접근 실패율이 감소한다. 또한 라인 교체 방식으로 Pseudo-LRU 방식을 채택하여 LRU 정보를 저장하는 비트 수를 감소시켰다. FPGA 에뮬레이션을 이용하여 사원 집합연관 캐쉬를 포함한 OpenRISC 코어를 검증하였고, 테스트 프로그램을 이용하여 성능을 측정한 결과, 사원 집합연관 캐쉬를 포함한 OpenRISC 코어의 성능이 기존의 OpenRISC 코어의 성능에 비해 약 50% 향상되었고, 미스율은 15%이상 감소하였다.

교통 정체 예방을 위한 자동 신호등 제어시스템 개발 (Development of Auto Traffic Light Control System for Prevention of Traffic Jam)

  • 백광무;신지환;박무훈
    • 융합신호처리학회논문지
    • /
    • 제15권4호
    • /
    • pp.148-154
    • /
    • 2014
  • 본 논문에서는 교차로에 설치된 한 대의 카메라를 활용하여 각 도로로 유입, 유출 되는 교통량을 동시에 측정할 수 있도록 하였으며 그 데이터를 기반으로 영상처리를 통해 신호등을 자동으로 제어하는 새로운 시스템을 제안한다. 또한 왕복 8차선 교차로의 교통량을 한 대의 카메라로 모니터링 가능하게 하여 차선 1개당 1대의 카메라 또는 루프 코일을 사용하던 기존 방식보다 효율적으로 광범위한 교통량 흐름을 통계적으로 모니터링 할 수 있도록 고안하였다. 실시간으로 배경영상이 업데이트되므로 불규칙적인 조건을 갖는 실 상황에서도 자동차 객체가 효율적으로 검지되도록 하였으며 관심영역 설정으로 보다 정확도 높은 교통량 측정을 가능하게 하였다. 본 논문에서 제안한 신호등 자동제어 알고리즘을 이용하여 정체가 일어나기 전에 각 도로간 교통량을 조절함으로써 교통 정체로 발생하는 운전자의 시간 낭비 및 에너지 낭비를 예방할 수 있다.

제조방법을 달리한 수삼 정과의 품질 특성 (Quality Characteristics of JungKwa Made with Ginseng by Different Manufacturing Methods)

  • 조은희;김명희
    • 한국조리학회지
    • /
    • 제20권3호
    • /
    • pp.161-170
    • /
    • 2014
  • 본 연구는 정과를 전통적인 방법보다 간편하게 제조하고자 전기밥솥을 이용하여 수삼 정과를 제조하고자 하였다. 전기밥솥에 수삼 정과를 제조할 경우 졸임 시간이 길어질수록 수분 함량은 줄고 당도는 높아졌다. 또한 졸임 시간이 길어질수록 명도는 낮아지고 적색도와 황색도는 유의적으로 높아졌고 205분 졸인 정과가 전통적인 방법으로 제조한 정과와 색이 가장 비슷하였다. 텍스처 측정 결과 졸임 시간이 길수록 경도는 높아 졌고, 경도와 씹힘성은 205분 졸인 정과가 전통적인 방법으로 제조한 정과와 가장 비슷한 수치를 보였다. 관능검사 결과 정과의 외관, 향, 맛, 텍스처, 종합적인 기호도에서 전기밥솥에 205분 졸인 것이 가장 선호 되었으며, 전통적인 방법을 대신하여 전기밥솥에 정과를 제조함이 가능함을 알 수 있었다.

Keyform Analysis of Rasch Measurement Accessible to Clinicians in Rehabilitation Clinics

  • Choi, Bong-Sam
    • 한국전문물리치료학회지
    • /
    • 제21권2호
    • /
    • pp.74-81
    • /
    • 2014
  • The versions of the Oswestry disability questionnaire (ODQ) is regarded as one of the most extensively used condition-specific instruments measuring disability resulting from low back pain. It has been shown to have adequate psychometrics, reliability, validity, and responsiveness as a whole, yet the summated total score of the instrument often provide little information to rehabilitation clinicians. A keyform analysis based on Rasch measurement model is an innovative way of illustrating the specific test items that an individual may or may not perform. By applying the keyform of the Rasch measurement model to the ODQ, rehabilitation clinicians may able to select more challenging ODQ items matching an individual's ability and document them as attainable treatment goals. The results demonstrated how a keyform analysis assist to setting possible goals for the treatment of individuals with low back pain. Forty-two individuals with low back pain were recruited from rehabilitation clinics in Gainesville, Florida. A series of Rasch analyses on the 10 items of the ODQ were performed using Winsteps software. The performance of two individuals on those 10 items was illustrated on the keyform. The keyform analysis of the Rasch measurement model may be translated into a useful tool for making clinical judgements.

고속 3차원 측정 및 칼라 이미징을 위한 다중 광탐침 공초점 주사 현미경 (Confocal Scanning Microscopy with Multiple Optical Probes for High Speed 3D Measurements and Color Imaging)

  • 천완희;이승우;안진우;권대갑
    • 반도체디스플레이기술학회지
    • /
    • 제7권1호
    • /
    • pp.11-16
    • /
    • 2008
  • Confocal scanning microscopy is a widely used technique for three dimensional measurements because it is characterized by high resolution, high SNR and depth discrimination. Generally an image is generated by moving one optical probe that satisfies the confocal condition on the specimen. Measurement speed is limited by movement speed of the optical probe; scanning speed. To improve measurement speed we increase the number of optical probes. Specimen region to scan is divided by optical probes. Multi-point information each optical probe points to can be obtained simultaneously. Therefore image acquisition speed is increased in proportion to the number of optical probes. And multiple optical probes from red, green and blue laser sources can be used for color imaging and image quality, i.e., contrast, is improved by adding color information by this way. To conclude, this technique contributes to the improvement of measurement speed and image quality.

  • PDF

Experimental Approach to Equalizing the Orifice Method with the Throughput One for the Measurement of TMP Pumping Speed

  • Lim, J.Y.;Kang, S.B.;Shin, J.H.;Koh, D.Y.;Cheung, W.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.18-18
    • /
    • 2010
  • Methods of the characteristics evaluation of turbo-molecular pumps (TMP) are well-defined in the international measurement standards such as ISO, PNEUROP, DIN, JIS, and AVS. The Vacuum Center in the Korea Research Institute of Standards and Science has recently designed, constructed, and established the integrated characteristics evaluation system of TMPs based on the international documents by continuously pursuing and acquiring the reliable international credibility through measurement perfection. The measurement of TMP pumping speed is normally performed with the throughput and orifice methods dependent on the mass flow regions. However, in the UHV range of the molecular flow region, the high uncertainties of the gauges, mass flow rates, and conductance are too critical to precisely accumulate reliable data. With UHV gauges of uncertainties less than 15% and a calculated conductance of the orifice, about 35% of pumping speed uncertainties are experimentally derived in the pressure range of less than $10^{-6}$ mbar. In order to solve the uncertainty problems of pumping speeds in the UHV range, we introduced an SRG with 1% accuracy and a constant volume flow meter (CVFM) to measure the finite mass flow rates down to $10^{-3}$ mbar-L/s with 3% uncertainty for the throughput method. In this way we have performed the measurement of pumping speed down to less than $10^{-6}$ mbar with an uncertainty of 6% for a 1000 L/s TMP. In this article we suggest that the CVFM has an ability to measure the conductance of the orifice experimentally with flowing the known mass through the orifice chambers, so that we may overcome the discontinuity problem encountering during introducing two measurement methods in one pumping speed evaluation sequence.

  • PDF

성장호르몬요법이 삶의 질, 우울, 자아존중감에 미치는 영향 (The Effects of Growth Hormone Therapy on the Quality of Life, Depression and Self-esteem)

  • 오정미;김경희
    • 한국간호교육학회지
    • /
    • 제12권1호
    • /
    • pp.52-59
    • /
    • 2006
  • Purpose: The study was attempted to provide basic materials for development of nursing-intervention programs by examining effects of growth hormone therapy on the quality of life, depression and self-esteem. Method: A survey was conducted for 31 adult outpatients as experimental group who have received growth hormone therapy more than 6 months and for 29 adults as control group who have not. A scale developed by Hilditch was used to measure their quality of life and also, the Zung's Self-rating Depression Scale and the Rosenberg's Self-esteem Scale were adopted to measure their depression and self-esteem each. Data were analyzed using one-way and two-way ANOVA Result: 1) there were differences between the two groups in the overall measurement of the quality of life. the growth hormone therapy group was higher in sub-factors 2) There were clear-cut differences between the two groups in depression, so that the control group marked higher score in the measurement of depression. 3) Self-esteem was not identical across the two groups, so that it was more higher for the growth hormone treatment group. Conclusion: Those findings suggest that development of education programs related to growth hormone and nursing-intervention is promising.

  • PDF

한국 농업인의 앉은자세 체형 특성 (Anthropometric Characteristics of Korean Farmers in a Sitting Posture)

  • 김도희;이경숙;김효철
    • 한국지역사회생활과학회지
    • /
    • 제22권1호
    • /
    • pp.63-76
    • /
    • 2011
  • The aim of this study was to establish the basic data on anthropometric characteristics of Korean farmers in a sitting posture. 533 Korean farmers(Male: 236persons, Female: 297persons) volunteered for this study from 8 different provinces nationwide in 2010. Subjects were classified according to their sex and categorized into 4 age groups from 40s to 70s and over. Statistical tests such as descriptive analysis, independent t-test, one-way and two-way ANOVA were conducted to analyze the data. The results were as follows: Korean farmers generally edged toward obesity. The older the farmers were, the smaller their body sizes were, but fatter in the abdominal areas. There were significant differences on the waist-related measurement items between farmers and the public. The farmers' waist-related sizes were larger than that of the public of all age groups in the male group, but only the forties age group in the female group. It tended to differ according to sex and age groups that we analyzed from the measurement values on other items between farmers and the public.

근관 성형 전후의 네 가지 전자근관장측정기의 측정 정확성의 비교 (In vitro comparison of measurement accuracy In pre-enlarged and enlarged canals with four apex locators)

  • 성상엽;박정길;허복;김현철
    • Restorative Dentistry and Endodontics
    • /
    • 제31권5호
    • /
    • pp.371-377
    • /
    • 2006
  • 이 연구의 목적은 확대하기 전 근관에서 전자근관장 측정 시의 정확성을 평가하고 확대된 근관에서 파일의 크기에 따른 네 가지 전자근관장 측정기의 정확성을 비교하기 위한 것이다. 발치된 치아 10개를 #10파일을 이용하여 치아의 실제길이를 측정하였다 현미경에서 25배 확대 하에 #10 파일이 치근단공을 넘어 해부학적 치근단공에 이를 때까지 전진하여 디지털 캘리퍼로 측정하였다. Root ZX, Bingo 1020, SmarPex, e-Magic Finder를 알지네이트를 이용한 인체 재현 모델을 이용하여 #10 파일로 apex 표시등에서 측정하였다 (S10). #45까지 핸드 파일로 확대한 다음 #10, #40 파일을 이용하여 전자근관장을 측정하였다. 실제 길이와 각각 측정값의 차이를 계산하여 L10, L40으로 정의하고 기계간의 비교는 one-way ANOVA통계처리하고, Scheffe's multiple range test로 사후 검증하였고, 같은 기계 안의 L10, L40은 Student's t-test로 비교하였다. 본 연구의 실험 조건 하에서, 측정값의 정확도가 기계간에 차이를 보였고, 파일의 크기는 측정값의 정확도에 영향을 주지 못하며, e-Magic Finder는 이 실험 조건하에서 다른 기계에 비해 가장 정확하였다.