• 한국정보전자통신기술학회논문지
• /
• 제15권2호
• /
• pp.117-123
• /
• 2022

현재 코로나19 확진자는 전 세계적으로 빠르게 증가하고 있다. 감염 확산을 억제할 수 있는 방법으로 신속한 코로나19 검사를 통한 확진자를 찾아내는 것이다. 본 논문에서는 코로나19 진단을 위한 잡음 그룹검사(Noisy Group Testing) 문제를 살펴본다. 기존에 제안한 그룹검사 문제는 측정잡음을 무시하였지만, 최근 들어 코로나19 검사시에 위 양성(false positive)과 위음성(false negative) 사례가 발생하고 있다. 이에 대해 본 논문에서는 잡음 그룹검사 문제를 정의하고 측정잡음이 성능에 얼마나 영향을 미치는지 분석한다. 본 연구를 통해 우리는 코로나19 검사 양성률이 낮은 그룹검사를 수행할수록 측정잡음(measurement noise)에 덜 민감하도록 그룹검사 시스템이 설계되어야 함을 제시한다. 또한 최근 발표한 다른 복원 알고리즘들과 비교하여 본 연구에서 제안하는 신호 복원 알고리즘이 잡음 그룹검사에서 좋은 성능을 보여준다.

• 대한지역사회작업치료학회지
• /
• 제10권1호
• /
• pp.51-61
• /
• 2020

목적 : 정상인을 대상으로 팔뻗기 수행 시 물체 크기와 뻗기 거리가 상지의 운동형상학적 요소에 미치는 영향을 알아보고자 하였다. 연구 방법 : 대상자는 부산시 D대학교에 재학 중인 대학생 30명이며 측정 도구는 삼차원 동작 분석기인 CMS-70P(Zebris Medizintechnik Gmbh, Germany)를 사용하였다. 과제는 6가지 조건이다. 팔뻗기 수행시 물체 크기(2cm, 10cm)와 뻗기 거리(15%, 37.5%, 60%)의 변화에 따른 움직임의 평균 속도, 평균 가속도, 최대 속도, 속도의 정점수를 측정하였다. 대상자의 일반적 특성은 기술통계를 사용하였다. 두 가지 물체 크기에서 세 가지 뻗기 거리로 팔뻗기 과제를 수행했을 때 변수를 비교하기 위해 일원분산분석(One-way ANOVA measure)으로 분석하였고, 사후검정은 Tukey 검정을 실시하였다. 또한 세 가지 뻗기 거리에서 두 가지 물체 크기에 따른 운동형상학적 차이를 분석하기 위해서 독립 t검정(Independent t-test)을 사용하였다. 팔뻗기 거리(15%, 37.5%, 60%)와 물체 크기(2cm, 10cm)에 따른 상호작용효과를 확인하기 위해 이원분산분석(3×2 Two-way ANOVA measure)을 실시하였다. 통계적 유의수준 α는 .05로 설정하였다. 결과 : 정상인은 물체 크기와 뻗기 거리의 변화에 따라 상지 움직임에 유의한 차이가 있었다. 물체 크기가 동일한 경우 뻗기 거리가 길어질수록 평균 속도, 최대속도가 증가하였고, 속도의 정점 수는 감소하였다. 뻗기 거리가 동일한 경우 물체 크기가 커질수록 평균 속도, 최대 속도가 증가하였고 속도의 정점 수는 감소하였다. 물체 크기와 뻗기 거리의 변화는 평균 가속도에 영향을 미치지 않았으며 유의한 차이가 없었다. 결론 : 과제를 시간적, 공간적 특성으로 제한하는 것은 대상자의 상지 움직임에도 영향을 미치게 된다. 따라서 본 연구의 결과를 토대로 신경학적 기능수준에 따라 세밀하게 등급화된 과제제공에 도움이 될 것으로 사료된다.

• 한국전문물리치료학회지
• /
• 제11권3호
• /
• pp.11-18
• /
• 2004

This study is aimed at investigating the influence of different quantitative knowledge of results on the measurement error during lumbar proprioceptive sensation training. Twenty-eight healthy adult men participated and subjects were randomly assigned into four different feedback groups(100% relative frequency with an angle feedback, 50% relative frequency with an angle feedback, 100% relative frequency with a length feedback, 50% relative frequency with a length feedback). An electrogoniometer was used to determine performance error in an angle, and the Schober test with measurement tape was used to determine performance error in a length. Each subject was asked to maintain an upright position with both eyes closed and both upper limbs stabilized on their pelvis. Lumbar vertebrae flexion was maintained at $30^{\circ}$ for three seconds. Different verbal knowledge of results was provided in four groups. After lumbar flexion was performed, knowledge of results was offered immediately. The resting period between the sessions per block was five seconds. Training consisted of 6 blocks, 10 sessions per one block, with a resting period of one minute. A resting period of five minutes was provided between 3 blocks and 4 blocks. A retention test was performed between 10 minutes and 24 hours later following the training block without providing knowledge of results. To determine the training effects, a two-way analysis of variance and a one-way analysis of variance were used with SPSS Ver. 10.0. A level of significance was set at .05. A significant block effect was shown for the acquisition phase (p<.05), and a significant feedback effect was shown in the immediate retention phase (p>.05). There was a significant feedback effect in the delayed retention phase (p<.05), and a significant block effect in the first acquisition phase and the last retention phase (p<.05). In conclusion, it is determined that a 50% relative frequency with a length feedback is the most efficient feedback among different feedback types.

• Journal of Hospice and Palliative Care
• /
• 제19권2호
• /
• pp.136-144
• /
• 2016

목적: 본 연구는 간호사들을 대상으로 좋은 죽음에 대한 인식, 연명치료 중단과 안락사에 대한 태도수준과 변인 간의 관련성을 확인하여 생명윤리교육의 근거를 마련하는데 실제적인 자료로 활용하고자 이루어졌다. 방법: 연구 대상은 서울, 부산경남, 및 경북지역에 소재한 500병상 이상의 6개 종합병원에서 6개월 이상 근무한 간호사 중 본 연구의 목적을 이해하고 연구 참여를 허락한 자 218명을 대상으로 편의표집 하였다. 연구도구는 좋은 죽음 인식 측정도구(The Concept of Good Death Measure), 연명치료 중단 측정도구와 안락사 측정도구(Attitudes toward Euthanasia)를 사용하였다. 수집된 자료는 SPSS 21 WIN 프로그램을 이용 서술통계, Independent t-test와 one-way ANOVA 및 Pearson's correlation coefficient로 분석하였다. 결과: 간호사의 좋은 죽음에 대한 인식, 연명치료 중단과 안락사에 대한 태도는 보통 수준이었다. 간호사의 일반적 특성에 따른 좋은 죽음에 대한 인식, 연명치료 중단과 안락사에 대한 태도차이는 교육수준, 근무경력 및 신앙의 중요성에서 유의하게 나타났다. 좋은 죽음과 연명치료 중단에 대한 태도는 역 상관관계가 있었고, 연명치료 중단과 안락사에 대한 태도는 순 상관관계가 있었다. 결론: 말기환자를 돌보는 과정에서 발생하는 윤리적 문제를 다루는데 간호사들은 숙련되어야 한다. 좋은 죽음에 대한 간호사의 인식확립과 연명치료 중단과 안락사와 같은 존엄사와 관련된 개념에 대한 이해와 윤리적 갈등 상황에서의 판단과 해결능력에 관한 생명윤리교육의 활성화가 필요하다고 본다.

• 한국의류학회지
• /
• 제12권1호
• /
• pp.53-68
• /
• 1988

The purpose of this study was to investigate the clothing buying behaviorial pattern and the differences of clothing buying behaviors by the demographic variables. For the measurement of clothing buying behavior, the researcher developed a questionnaire. This questionnaire was adjusted by preliminary test. Data were collected from 494 women dwelling in Seoul, Busan, Daegu. For statistical analysis, frequency, percentage, average, standard deviation, paired t-test, $X^2-test$, one way analysis of variance, Duncan's multiple range test were used. The results were as follows: 1. The $57\%$ of the subject group planned their clothing purchase in advance, ana their friends affected clothing buying behaviors more than other fashion information sources. The store in which the subject group purchased clothing most frequently was a department store. In clothing selection, hygienic factor and aesthetic factor were shown as important factors. 2, There were significant differences in clothing buying behaviors according to demographic variables.

• Agricultural and Biosystems Engineering
• /
• 제3권1호
• /
• pp.1-9
• /
• 2002

Garlic is one of the major seasoning vegetables in Korea and consumed mostly in a form of peeled cloves. Conventional Korean standards for garlic grading consist of four classes according to the size of bulb and its shape. Sorting and grading of garlic are manually done but could be in the process of automated mechanization using machine vision system in the near future. The proportion of mass of cloves in a garlic bulb to the volume of the bulb (g/ml) was determined to find out the best way of representing both the quantity and quality of cloves in each bulb. Garlic bulb was assumed as an ellipsoid and its major and minor axis and its height were measured to calculate its volume. The mass proportions and density of a garlic bulb and cloves were measured for four domestic varieties of garlic to propose it as a standard for Korean garlic grading machine.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.65.1-65.1
• /
• 2010

Thermal performance tests of solar thermal collectors include determination of coefficient parameters in an efficiency equation. The parameters can be estimated using regression method to minimize an objective function as sum of differences between measured efficiency data and regressed efficiency equation. However, this conventional approach doesn't consider measurement uncertainties. In this presentation, a method to determine regression parameters in the efficiency equation and uncertainties of the parameters is described with mainly mathematical expressions based on literature reviews. In the method, parameters in the equation for collector efficiency can be determined using regression analysis with a weighting factor in the objective function. The weighting factor can be uncertainties of the differences between measured and fitted efficiencies. To evaluate the approach, performance estimation of a solar collector using the efficiency equation with uncertainties is compared to the result using the conventional efficiency equation by a simulated way for a case in one of previous studies.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.426-439
• /
• 1996

In this paper, we propose a simple algorithm to calculate the numbers of the passing cars by using an image processing sensor for the digital black and white images with 256 tone level. Shadow is one of the most troublesome factor in image processing. By differencing the tone level, we cannot discriminate between the body of the car and its shadow. In our proposed algorithm, the area of the shadow is excluded by recognizing the position of each traffic lane. For real-time operation and simple calculation, two lines of the tone level are extracted and the existences of cars are recognized. In the experimental application on a high-way, the recognition rate of the real-time operation is more than 94%.

• 간호행정학회지
• /
• 제18권4호
• /
• pp.452-459
• /
• 2012

Purpose: This study was a descriptive study conducted to investigate the effects of intellectual capital on organizational performance of nurses in medium and small hospitals. Methods: Data were collected from 241 nurses working in medium and/or small hospitals located in G City from August 10 to September 17, 2011. The measurement tools were the Intellectual Capital scale and Organizational Performance scale. Data were analyzed using frequency, percentage, mean, standard deviation, t-test, one way ANOVA, Pearson correlation, and hierarchical regression with SPSS WIN 18.0 PC. Results: Intellectual capital composed of human, customer, and structure capital had significant effects on organizational performance of nurses working in medium and small hospitals and explained 50.4% of the variance. Conclusion: In order to promote organizational performance of nurses, nursing managers and administrators need to invest more resources into the intellectual capital of the system including human, customer, and structure capital.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.885-890
• /
• 2007

Fast Fourier Transformation(FFT) is one of the most useful way to analyze response signal for the purpose of grasping the dynamic characteristics of system. Vibration test using impact hammer is typical and simple experimental method widely used for catching hold of dynamic peculiar characters and modal behaviors of system. In this thesis, impact testing module for NI-PXI equipment is developed. The analyzing and visualizing module are developed with LabVIEW tool. A user can see quickly and easily modal shape of system after analyzing acquired data. This developed module will be expected to build up more convenient and serviceable measurement system.