• Investigative Magnetic Resonance Imaging
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2018

Purpose: This study was designed to optimize the flip angle (FA) and scan timing of the hepatobiliary phase (HBP) using the 3D T1-weighted, gradient-echo (GRE) imaging with controlled aliasing in parallel imaging results in higher acceleration (CAIPIRINHA) technique on gadoxetic acid-enhanced 3T liver MR imaging. Materials and Methods: Sixty-two patients who underwent gadoxetic acid-enhanced 3T liver MR imaging were included in this study. Four 3D T1-weighted GRE imaging studies using the CAIPIRINHA technique and FAs of $9^{\circ}$ and $13^{\circ}$ were acquired during HBP at 15 and 20 min after intravenous injection of gadoxetic acid. Two abdominal radiologists, who were blinded to the FA and the timing of image acquisition, assessed the sharpness of liver edge, hepatic vessel clarity, lesion conspicuity, artifact severity, and overall image quality using a five-point scale. Quantitative analysis was performed by another radiologist to estimate the relative liver enhancement (RLE) and the signal-to-noise ratio (SNR). Statistical analyses were performed using the Wilcoxon signed rank test and one-way analysis of variance. Results: The scores of the HBP with an FA of $13^{\circ}$ during the same delayed time were significantly higher than those of the HBP with an FA of $9^{\circ}$ in all the assessment items (P < 0.01). In terms of the delay time, images at the same FA obtained with a 20-min-HBP showed better quality than those obtained with a 15-min-HBP. There was no significant difference in qualitative scores between the 20-min-HBP and the 15-min-HBP images in the non-liver cirrhosis (LC) group except for the hepatic vessel clarity score with $9^{\circ}$ FA. In the quantitative analysis, a statistically significant difference was found in the degree of RLE in the four HBP images (P = 0.012). However, in the subgroup analysis, no significant difference in RLE was found in the four HBP images in either the LC or the non-LC groups. The SNR did not differ significantly in the four HBP images. In the subgroup analysis, 20-min-HBP imaging with a $13^{\circ}$ FA showed the highest SNR value in the LC-group, whereas 15-min-HBP imaging with a $13^{\circ}$ FA showed the best value of SNR in the non-LC group. Conclusion: The use of a moderately high FA improves the image quality and lesion conspicuity on 3D, T1-weighted GRE imaging using the CAIPIRINHA technique on gadoxetic acid, 3T liver MR imaging. In patients with normal liver function, the 15-min-HBP with a $13^{\circ}$ FA represents a feasible option without a significant decrease in image quality.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.217-237
• /
• 1998

The present research is to study the make-up culture of Korea and its neighboring countries such as China and Japan during the period from the prehistoric age to the 19th cen-tury. The research was made by documents analysis. The results are summerised as follows : (1) A man has a basic instinct to beautify himself. There was not a significant difference between the make-up behavior of men and women in its primal stage. It was by the start of farming and the division of labor that made the make-up behavior as a feminine culture. The difference of sexual role caused the con-ceptual difference between manly beauty and womanly beauty. It was very natural for women to regard the make-up as the best way for showing their feminine beauty. In Korea, China and Japan, there were vari-ous kinds of primal actions such as tattooing, body-painting, and tooth make-up which were used in the purpose of body protection, incantation, ornament, and so on. Ass their ornamental purpose was becoming more important, these primal actions became the basis of the feminine make-up culture. Nowadays make-up, having mental and emo-tional function, is helpful to increasing self-satisfaction, promoting good personal relation-ship, and attracting attention from the other sex. It also has other functions of showing social status, wealth, age, sex, courage, power, and so on. (2) The representative make-up product used widely in the three countries was Boon (powder) which decides the overall color of face. The key point in the production of Boon was to increase its power of adsorption. The invention of Yunboon (power mixed with lead) solved this major problem of Boon. Yeonji which decides the color of cheek was the mixture of Boon and the powder of Honghwa (a kind of red-colored flower or tree). Mimook (eyebrow pencil) was developed to match up with the various and changing currencies of penciling eyebrows in each nation and times, Yeonji and Joosa (red sand) were used as Jinji (lip stick). The predominant color of Jinji was red. As miscellaneous methods of partial make-up, there were Kon-ji used in a wedding cer-emony in korea, Aek-hwang, Hwa-jeon, Sa-hong, and Myun-yup in China, and Chi-heuk, a peculial method of partial make-up in japan. (3) There were various factors which decided the characteristics of make-up culture usually reflects international atmosphere, the form of government, economic situation, re-ligious and social ideology, aesthetic sense, symbolizing meanings of colors, and so on. The up and down of an influentian country was one of the major factors which decided the characteristics of the make-up culture of its neighboring countries. When a country took a liberal form of government, it had diverse and splendid tendencies in its make-up culture. The better a nation's economic situation is, the more abandant and various its make-up culture is, and sometimes, the more eccentric and decadents it was. In the field of make-up production, the three countries had their own characteristics. But, as a whole, China was the leading nation who spread the culture and products of make-up to Korea and Japan. Though the Chinese make-up culture and products were usually spread to Japan through Korean, there was some evidence of direct exchanges between China and Japan through its dispatches of Kyun-Tang-Sa(Japanese delegation to the Tang Dynasty). While religion had a positive influence on the development of make-up culture by introducing new methods of make-up, Confucianism exercised strict control over the make-up cul-ture. The currencies in arts and changes of esthetic sense introduced new methods and booms to the make-up culture. Literature made people pay increasing attentions to the countenances of women and changed the standards of esthetic sense. We can find out that the social status of woman was also reflected in the make-up culture. As the social status of women became higher, the feminine make-up culture also developed more then ever. As mentioned above, the make-up cultures of the three countries reflected their social values, esthetic senses, and emotional feelings. Through their cultural exchanges, the three countries could develop various make-up products and methods.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.37-44
• /
• 2013

Sodium hypochlorite and ethylene diamine tetra acetic acid are substances usually used during endodontic treatment. Several studies found that the bonding was negated with certain irrigants and some of the used irrigants have demineralizing and chealating effects, so it was advocated to omit the etching step in etch and rinse adhesive systems. The purpose of this in vitro study was to evaluate the influence of NaOCl & EDTA on the bonding strength of ethanol wet bonding. Thirty human molars were selected and mesiodistally sectioned into halves, thus providing sixty specimens. The specimens were randomly assigned to 4 groups(n=15) according to the irrigant regimen used : (1) irrigated with distilled water for 10min (control); (2) irrigated with 5.25% NaOCl(10min), flushed with 5.25% NaOCl(1min) (3) irrigated with 5.25% NaOCl, flushed with 17% EDTA (4) irrigated with 5.25% NaOCl, flushed with 17% EDTA. Each group was acid-etched with 37% phosphoric acid(except group 4) and had their dentin surfaces dehydrated with ethanol solutions : 50%, 70%, 80%, 95%, 3x100%, 30s for each application. After dehydration, a primer( 50% all bond 3 resin + 50% ethanol) was used, followed by the adhesive(ALL-BOND 3 RESIN) application. Resin composite build-ups were then prepared using an incremental technique. Specimens were sectioned into beams and submitted to a tensile load using a Micro Tensile Tester(Bisco Inc.). The data were statistically analyzed using one-way ANOVA and Tukey HSD at p<0.5 level. There was no significant difference on G1(control) and G2(irrigated with NaOCl only ). (p>0.05). G3(flushed with EDTA) showed significantly high tensile bonding strength compared to the G2 (p<0.05). G4( treated with EDTA but no acid-etching) was significantly lower value than G3. (p<0.05) Although there was no significant difference, 5.25% NaOCl seemed to have an adverse effect on the bonding strength of ethanol wet bonding. The flushing with EDTA after NaOCl irrigation prevents the decrease of bonding strength. The use of 17% EDTA as a final flush can enhance the bonding strength but EDTA flushing can't substitute for a acid-etching.

• Korean Security Journal
• /
• no.9
• /
• pp.99-131
• /
• 2005

Terrorism which became today's common phenomena over the world is one of the most serious threats the world confront. Although International society make and operate outstanding anti-terrorism system, terror would never end without solving fundamental problems. The main body of terrorism converts from nation to organization and from organization to cell, which makes it difficult for us to recognize the main body. Since the target of today's new terrorism is many and unspecified persons, terrorists will never hesitate to use mass destruction weapons such as nuclear, biological, chemical weapons, and also use cyber-technique or cyber-terrorism. So, effective counter-terrorism measures should be performed as follows. First, it must be better for international society should make long-time plan of solving fundamental problems of terrorism other than to operate directly on terror organization and its means. Second, preventive method should be made. The most effective method of eradicating terrorism is prevention. For this, it is necessary to remove environmental elements of terrorism and terrorist bases, and to stop inflow of money and mass destruction weapons to terrorists. Third, integrated anti-terror organization should be organized and operated for continuous counter-terrorism operations. Also international alliance for anti-terrorism should be maintained to share informations and measures. Fourth, concerned department in the government should prepare counter-terrorism plans in their own parts as follows and make efforts to integrate the plans. - Ministry of Government Administration and Home Affairs : conventional terror - Ministry of Health and Welfare : bio-terror - Ministry of Science and Technology : nuclear-terror Especially, they should convert their policy and operation from post-terror actions to pre-terror actions, designate terror as national disaster and organize integrated emergency response organization including civil, government, and military elements. In conclusion, pre-terror activities and remedy of fundamental causes is the best way to prevent terror. Also, strengthening of intelligence activities, international cooperations, and preventive and comprehensive counter-measures must not ignored.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.3
• /
• pp.249-257
• /
• 2007

State of problem : The use of zirconium oxide all-ceramic material provides several advantages, including a high flexural strength(>1000MPa) and desirable optical properties, such as shading adaptation to the basic shades and a reduction in the layer thickness. Along with the strength of the materials, the cementation technique is also important to the clinical success of a restoration. Nevertheless, little information is available on the effect of different surface treatments on the bonding of zirconium high-crystalline ceramics and resin luting agents. Purpose : The aim of this study was to test the effects of surface treatments of zirconium on shear bond strengths between bovine teeth and a zirconia ceramic and evaluate differences among cements Material and methods : 54 sound bovine teeth extracted within a 1 months, were used. They were frozen in distilled water. These were rinsed by tap water to confirm that no granulation tissues have left. These were kept refrigerated at $4^{\circ}C$ until tested. Each tooth was placed horizontally at a plastic cylinder (diameter 20mm), and embedded in epoxy resin. Teeth were sectioned with diamond burs to expose dentin and grinded with #600 silicon carbide paper. To make sure there was no enamel left, each was observed under an optical microscope. 54 prefabricated zirconium oxide ceramic copings(Lava, 3M ESPE, USA) were assigned into 3 groups ; control, airborne-abraded with $110{\mu}m$ $Al_2O_3$ and scratched with diamond burs at 4 directions. They were cemented with a seating force of 10 ㎏ per tooth, using resin luting cement(Panavia $F^{(R)}$), resin cement(Superbond $C&B^{(R)}$), and resin modified GI cement(Rely X $Luting^{(R)}$). Those were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 5000 cycles with a 30 second dwell time, and then shear bond strength was determined in a universal test machine(Model 4200, Instron Co., Canton, USA). The crosshead speed was 1 mm/min. The result was analyzed with one-way analysis of variance(ANOVA) and the Tukey test at a significance level of P<0.05. Results : Superbond $C&B^{(R)}$ at scratching with diamond burs showed the highest shear bond strength than others (p<.05). For Panavia $F^{(R)}$, groups of scratching and sandblasting showed significantly higher shear bond strength than control group(p<.05). For Rely X $Luting^{(R)}$, only between scratching & control group, significantly different shear bond strength was observed(p<.05). Conclusion : Within the limitation of this study, Superbond $C&B^{(R)}$ showed clinically acceptable shear bond between bovine teeth & zirconia ceramics regardless of surface treatments. For the surface treatment, scratching increased shear bond strength. Increase of shear bond strength by sandblasting with $110{\mu}m$ $Al_2O_3$ was not statistically different.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.231-242
• /
• 2008

Purpose: The purpose of this study was to investigate the bond strength of the core-veneer interface in all ceramic systems. Material and Methods: The all ceramic systems tested with their respective veneer were IPS Empress 2 with IPS Eris, IPS e.max Press with IPS e.max Ceram and IPS-e.max ZirCAD with IPS e.max Ceram. Cores (N=36, N=12/group, diameter: 10mm, thickness: 3mm) were fabricated according to the manufacturer's instruction and cleaned with ultrasonic cleaner. The veneer(diameter: 3mm, thickness: 2mm) were condensed in stainless steel mold and fired on to the core materials. After firing, they were again ultrasonically cleaned and embedded in acrylic resin. The specimens were stored in distilled water at $37^{\circ}C$ for 1 week. The specimens were placed in a mounting jig and subjected to shear force in a universal testing machine(Z020, Zwick, Germany). Load was applied at close to the core-veneer interface as possible with crosshead speed of 1.00mm/min until failure. Average shear bond strengths(MPa) were analyzed with a one-way analysis of variance and the Tukey test(${\alpha}=.05$). The failed specimens were examinated by scanning electron microscopy(JSM-6360, JEOL, Japan). The pattern of failure was classified as cohesive in core, cohesive in veneer, mixed or adhesive. Results: The mean shear bond strength($MPa{\pm}SD$) were IPS e.max Press $32.85{\pm}6.75MPa$, IPS Empress 2 $29.30{\pm}6.51MPa$, IPS e.max ZirCAD $28.10{\pm}4.28MPa$. IPS Empress 2, IPS e.max Press, IPS e.max ZirCAD were not significantly different from each others. Scanning electron microscopy examination revealed that adhesive failure did not occur in any all ceramic systems. IPS Empress 2 and IPS e.max Press exhibited cohesive failure in both the core and the veneer. IPS e.max ZirCAD exhibited cohesive failure in veneer and mixed failure.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.119-128
• /
• 2011

The Sensor technology and portable device capability able to collect recent user information and the information about the surrounding environment haven been highly developed. A user can be made use of various contents and the option is also extending with this technology development. In particular, the initial portable device had simply a call function, but now that has evolved into 'the 4th screen' which including movie, television, PC ability. also, in the past, a portable device to provided only the services of a SMS, in recent years, it provided to interactive video service, and it include technology which providing various contents. Also, it is rising as media which leading the consumption of contents, because it can be used anytime, anywhere. However, the contents available for the nature of user's handheld devices are limited. because it is very difficult for making the contents separately according to various device specification. To find a solution to this problem, the study on one contents from several device has been progressing. The contents conversion technology making use of the profile of device out of this study comes to the force and profile study has been progressing for this. Furthermore, Demand for a user is also increased and the study on the technology collecting, analyzing demands has been making active progress. And what is more, Grasping user's demands by making use of this technology and the study on the technology analyzing, providing contents has been making active progress as well. First of all, there is a method making good use of ZigBee, Bluetooth technology about the sensor for gathering user's information. ZigBee uses low-power digital radio for wireless headphone, wireless communication network, and being utilized for smart energy, automatic home system, wireless communication application and wireless sensor application. Bluetooth, as industry standards of PAN(Personal Area Networks), is being made of use of low power wireless device for the technology supporting data transmission such as drawing file, video file among Bluetooth device. With analyzing the collected information making use of this technology, it utilizes personalized service based on network knowledge developed by ETRI to service contents tailor-made for a user. Now that personalized service builds up network knowledge about user's various environments, the technology provides context friendly service constructed dynamically on the basis of this. The contents to service dynamically like this offer the contents that it converses with utilizing device profile to working well. Therefore, this paper suggests the system as follow. It collects the information, for example of user's sensitivity, context and location by using sensor technology, and generates the profile as a means of collected information as sensor. It collects the user's propensity to the information by user's input and event and generates profile in the same way besides the gathered information by sensor. Device transmits a generated profile and the profile about a device specification to proxy server. And proxy server transmits a profile to each profile management server. It analyzes profile in proxy server so that it selects the contents user demand and requests in contents server. Contents server receives a profile of user portable device from device profile server and converses the contents by using this. Original source code of contents convert into XML code using the device profile and XML code convert into source code available in user portable device. Thus, contents conversion process is terminated and user friendly system is completed as the user transmits optimal contents for user portable device.

• Journal of Life Science
• /
• v.15 no.3 s.70
• /
• pp.415-422
• /
• 2005

library of the mutants was prepared by transposon mutagenesis of the Mycobacterium bovis BCG. We screened this library for the resistance to an anti-tuberculosis antibiotic, PA-824. Most of the mutants resistant to the PA-824 were not able to synthesize the coenzyme $F_{420}$ which is normally produced by the wild type M. bovis BCG strains. HPLC analysis of the cellular extract showed that one of those mutants which lost the ability to synthesize $F_{420}$ still produced F0. The insertion site of the transposon in this mutant was determined by an inverse PCR and the transposon was found to be inserted in the Rv2435c open reading frame (ORF). Rv2435c ORF is predicted to encode an 80.3 kDa protein. Rv2435c protein appears to be bound to the cytoplasmic membrane, its N-terminal present in the periplasm and C-terminal in the cytoplasm. The C-terminal portion of this protein is highly homologous with the adenylyl cyclases of both prokaryotes and eukaryotes. There are 15 ORFs which have homology with the class III AC proteins in the genome of the M. tuberculosis and M. bovis. Two of those, Rv1625c and Rv2435c, are highly homologous with the mammalian ACs. We cloned the cytoplasmic domain of the Rv2435c ORF and expressed it with six histidine residues attached on its C-terminal in Escherichia coli to find out if this protein is a genuine AC. Production of that protein in E. coli was proved by purifying the histidine-tagged protein by using the Ni-NTA resin. This protein, however, failed to complement the cya mutation in E. coli, indicating that this protein lacks the AC activity. All of the further attempts to convert this protein to a functional AC by a mutagenesis with UV or hydroxylamine, or construction of several different fusion proteins with Rv1625c failed. It is, therefore, possible that Rv2435c protein might affect the conversion of F0 to $F_{420}$ not by synthesizing cAMP but by some other way.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.83-94
• /
• 2009

The aim of this study was to investigate the shear bond strength between zirconia ceramic and resin cement according to various surface treatments. The surface of each zirconia ceramic was subjected to one of the following treatments and then bonded Rely X Unicem or Rely X ARC resin cement; (1) Rocatec system and $50{\mu}m$ surface polishing, (2) No treatment and $50{\mu}m$ surface polishing, (3) Rocatec system and $1{\mu}m$ surface polishing, (4) No treatment and $1{\mu}m$ surface polishing. Each of eight bonding group was tested in shear bond strengths by universal testing machine(Z020, Zwick, Ulm, Germany) with crosshead speed of 1mm/min. The results were as follows; 1. Rocatec treatment groups showed greater bonding strengths than No Rocatec groups. There was significant difference of among groups(P<0.001) 2. For Rocatec groups, $50{\mu}m$ surface roughness groups showed greater bonding strengths than $1{\mu}m$ surface roughness groups.(P<0.001) But for No Rocatec groups, There was no significant difference of among groups(P>0.05) 3. Rely X Unicem groups showed greater bonding strengths than Rely X ARC groups. There was significant difference of among groups(P<0.01) Within the conditions of this study, Rocatec treatment was an effective way of increasing zirconia bonds to a resin cement, even in the case of self-adhesive resin cement.

• Journal of Acupuncture Research
• /
• v.22 no.3
• /
• pp.137-144
• /
• 2005

Objective : This study was designed to assess the heart rate variablitv of patients with Parkinson's disease according to Hoehn-Yahr stage. Methods : Subjects were voluntarily recruited by newspapers and internet. All the subjects are confirmed as idiopathic parkinson's disease by a neurologist. The patients were grouped by Hoehn-Yahr(H-Y) stage. Heart rate variability was measured for 5 minutes after 5 minutes' bed rest. Subjects were comprised of 3 groups which were H-Y stage I (n=14), H-Y stage H(n=9), H-Y stage III(n=7). We compared the heart rate variability of each groups by one-way ANOVA test. We also studied the relationship between UPDRS score and Heat rate variability components (SDNN, RMS-SD and TP) by pearson correlation analysis and simple linear regressin analysis Results: Age, duration was matched among groups. SDNN, RMS-SD, TP were significantly decreased as H-Y stage increased(p<0.05). Especially there was significant difference between H-Y stage I and III group(p<0.05). But other components(Heart rate, LF, HF, LF/HF ratio) were not showed significant difference. SDNN, RMS-SD and TP were significantly decreased as UPDRS scores increase(p<0.05). Conclusion : This study suggests that the function of the autonomic nervous system decreases as Parkinson`s disease progresses.