• 제목/요약/키워드: one-way function.

검색결과 879건 처리시간 0.027초

ProTaper Universal에 축적된 내부 응력이 피로 파절에 미치는 영향 (Effect of Internal Stress on Cyclic Fatigue Failure in ProTaper Universal)

  • 조윤성;김진우;조경모;박세희
    • 구강회복응용과학지
    • /
    • 제28권1호
    • /
    • pp.57-66
    • /
    • 2012
  • 본 연구는 ProTaper Universal에 의도적으로 부여한 내부 응력이 피로 파절에 미치는 영향을 평가하였다. 25 mm 길이의 S1, S2, F1, F2, F3, F4 그리고 F5 파일을 내부 응력을 부여하기 위해서 Endo-Training-Bloc (Dentsply Maillefer)에 auto-stop 될 때까지 속도 300 rpm, 토크 1.0 Ncm의 값으로 밀어 넣었다. 부여한 내부 응력의 횟수에 따라 각각 Stress 0 군(대조군), Stress 1 군, Stress 2 군 그리고 Stress 3 군으로 분류하였다. 경사진 유리판을 사용하였고 파일 파절 시간을 측정하였다. 모든 파일에서는 Stress 3 군은 대조군에 비해 Ni-Ti 파일의 파절 시간이 감소하였고 F2와 F3에서 모든 실험군은 대조군에 비해 파절 시간이 감소하였다. F4와 F5에서 Stress 2 군과 Stress 3 군이 대조군에 비해 파절 시간이 감소하였다. ProTaper Universal의 피로 파절은 파일에 축적된 내부 응력에 의해 영향을 받는다.

유도계획과 QM 도구들을 활용한 신제품 개발과정의 혁신 전략 (Innovation Strategy For New Product Development Process by Indicative Planning & QM Tools)

  • 유지현;정태욱;송인철;오현승;이세재;조진형
    • 산업경영시스템학회지
    • /
    • 제40권4호
    • /
    • pp.78-86
    • /
    • 2017
  • The new businesses started by the companies usually results in being unsuccessful. The main reasons for that are either aiming targeting wrong customers, unsatisfaction of customers' requesting quality standards, or taking wrong actions against the competitors in the market. Therefore, companies should aim the targets for the newly developing products based on the fulfilling values for the customers when they start the new businesses, and should take good cares for risk managements at the each step of the new business to prevent the failure in advance. In addition to that, the companies starting new businesses not only need to take the customers attributes (CA) into account, but they also should apply the new technologies as one system to initiate a new business to satisfy the basic wants of the customers. This article suggests the New Product Development Pursuing Model using the Indicative Planning methodology and the Quality Management tools. The New Product Development Pursuing Model would be completed by the following steps as below; 1. Drawing the CTQ (Critical To Quality) for setting up the new product development objectives by : i) using the VOC (Voice Of Customers) obtained by the QFD (Quality Function Deploypment) if the market is mature, ii) applying AHP (Analytic Hierarchy Process) to information in the QIS (Quality Information System) if the market is unmature to get enough need information of the customers. 2. Risk Management in NPD : The NPD pursuing model consisted of the IP (indicative planning) is suggested not by the process of top-down-way mandatory planning process, but by the tools used in the administrative science and economic fields, namely by governance. The companies could apply innovative methodology for new products development processes to fulfil the customers satisfaction in the fields, through the CA (Contingency Approach) of the NPD (New Product Development) process.

THE EFFECT OF MONOMER TO POWDER RATIO ON POLYMERIZATION SHRINKAGE-STRAIN KINETICS OF POLYMER-BASED PROVISIONAL CROWN AND FIXED PARTIAL DENTURE MATERIALS

  • Kim, Sung-Hun
    • 대한치과보철학회지
    • /
    • 제45권6호
    • /
    • pp.735-742
    • /
    • 2007
  • Statement of problem. Although a number of previous investigations have been carried out on the polymerization shrinkage-strain kinetics of provisional crown and fixed partial denture (FPD) materials, the effect of the changes of liquid monomer to powder ratio on its polymerization shrinkage-strain kinetics has not been reported. Purpose. The purpose of this study was to investigate the influence of liquid monomer to powder ratio of polymer-based provisional crown and FPD materials on the polymerization shrinkage-strain kinetics. Material and methods. Chemically activated acrylic provisional materials (Alike, Jet, Snap) were investigated. Each material was mixed with different liquid monomer to powder ratios by volume (1.0:3.0, 1.0:2.5, 1.0:2.0, 1.0:1.5, 1.0:1.0). Time dependent polymerization shrinkage- strain kinetics of all materials was measured by the bonded-disk method as a function of time at $23^{\circ}C$. Five recordings were taken for each ratio. The results were statistically analyzed using one-way ANOVA and the multiple comparison Scheffe test at the significance level of 0.05. Trends were also examined by linear regression. Results. At 5 minutes after mixing, the polymerization shrinkage-strains of all materials ranged from only 0.01% to 0.49%. At 10 minutes, the shrinkage-strain of Alike was the highest, 3.45% (liquid monomer to powder ratio=1.0:3.0). Jet and Snap were 2.69% (1.0:2.0) and 1.58% (1.0:3.0), respectively (P>0.05). Most shrinkage (94.3%-96.5%) occurred at 30 minutes after mixing for liquid monomer to powder ratio, ranging from 1.0:3.0 to 1.0:1.0. The highest polymerization shrinkage-strain values were observed for the liquid monomer to powder ratio of 1.0:3.0. At 120 minutes after mixing, the shrinkage-strain values were 4.67%, 4.18%, and 3.07% for Jet, Alike, and Snap, respectively. As the liquid monomer to powder ratio increased, the shrinkage-strain values tend to be decreased linearly (r=-0.769 for Alike, -0.717 for Jet, -0.435 for Snap, $r^2=0.592$ for Alike, 0.515 for Jet, 0.189 for Snap; P<0.05). Conclusion. The increase of the liquid monomer to powder ratio from 1.0:3.0 to 1.0:1.0 had a significant effect on the shrinkage-strain kinetics of polymer-based crown and FPD materials investigated. This increased the working time and decreased the shrinkage-strain during polymerization.

Lithium Disilicate Glass-ceramic과 상아질 간의 접착성 레진 시멘트의 결합강도에 대한 임시 수복재와 임시 충전재의 영향 (Effect of Provisional Restorative and Filling Materials on Bond Strength of Adhesive Resin Cement between Lithium Disilicate Glass-Ceramic and Dentin)

  • 오상천;심헌보
    • 구강회복응용과학지
    • /
    • 제29권4호
    • /
    • pp.359-365
    • /
    • 2013
  • 본 연구는 lithium disilicate glass-ceramic과 상아질 간의 결합력에 대한 임시 수복재와 임시 충전재의 효과를 평가하기 위함이 목적이었다. 60개의 발치된 치아를 자가중합형 레진에 포매한 후 교합1/3 부위를 절단하였고, 무작위로 15개씩 4그룹으로 나누었다. 그런 후 lithium disilicate glass-ceramic을 다음과 같이 그룹으로 나누어 상아질에 접착시켰다: 아무 처리도 하지 않은 그룹(그룹A), ALIKETM (GC America Inc.)를 적용한 그룹(그룹 B), Luxatemp$^{(R)}$ Automix plus (DMG, Germany)를 적용한 그룹(그룹 C), Fermit$^{(R)}$ (Ivoclar Vivadent, Leichtenstein)를 적용한 그룹(그룹 D). 모든 시편들을 24시간 증류수에 담가 보관한 후, 1 mm/min의 crosshead speed로 만능시험기(Zwick 1456 41, Zwick, Germany) 상에서 전단 결합 강도를 측정하였다. 모든 그룹 간에 결합력의 통계학적 유의성은 없었으며, 파절양상은 대부분 시편에서 접착성(adhesive)과 응집성(cohesive)이 복합적으로 보이는 혼합형(mixed type)을 보였다. 본 실험의 제한된 조건 하에서는 임상에서 lithium disilicate glass-ceramic을 상아질에 접착시, 임시 수복재나 임시 충전재의 영향이 그리 크지 않을 것으로 판단되었다.

뇌졸중 환자가 지각하는 사회적 지지와 희망과의 관계 (The Correlation between Perceived Social Support and Hope of Stroke Survivors)

  • 김경옥;조복희
    • 재활간호학회지
    • /
    • 제4권1호
    • /
    • pp.58-72
    • /
    • 2001
  • A Cerebrovascular accident(CVA), or Stroke is a medical emergency that occurred when the blood supply to the brain is interrupted or blocked. The stroke causes physical function disorder due to hemiparalysis and emotional disorder. Also the stroke patients experience helplessness, powerlessness, sense of alienation and loss of hope. These feelings make the rehabilitation difficult because they lose the will of life. The purpose of this study is to identify the correlation between perceived social support and hope of stroke survivors. The subjects for this study were 100 out-patients with stroke in one general hospital and oriental medicine hospital located in Mokpo. The data were analysed by frequency, t-test, ANOVA. Duncan test, Pearson's correlation, using the SPSS WIN 9.0 program. Data were collected from July 11 to September 9, 2000, using a structured questionnaire. The instruments used for this study : The social support scale developed by Park, Ji-won(1985) and the hope scale developed by Miller(1988). The results were as follows. 1. It was found that the higher the degree of perceived social support, the higher the degree of hope(r=.726, p=.000). Therefore hypothesis was supported. 2. The mean score of perceived social support was 77.8(SD=21.0) with a score range from 27.0 to 104.0. 3. The mean score of perceived hope was 117.0(SD=25.7) with a score range from 57.0 to 160.0. 4. The level of social support depending on general characteristics were significantly different in variables such as marital status(t=3.131, p=.010). degree of income satisfaction(F=16.027, p=.000). 5. The level of hope depending on general characteristics were significantly different in variables such as marital status(t=2.681, p=.040). current job(t=-2.055, p=.043) degree of income, satisfaction(F=11.363, p=.000). For these subjects, there was a significant relationship between social support and hope. The stroke survivors need social support to inspire their hope. Nurses should plan interventions to enhance social support for patients with stroke. The above results may be used as the basic data to seek more efficient way of elevating nursing practice and rehabilitation for the patients with stroke.

  • PDF

임플란트 보철방식에 따른 임플란트 주위염 자각증상 및 만족도 (Subjective Symptoms of Peri-Implantitis and Satisfaction according to Prosthesis Methods)

  • 차지애;한경순
    • 치위생과학회지
    • /
    • 제17권2호
    • /
    • pp.175-182
    • /
    • 2017
  • 본 연구는 성인 375명을 대상으로 임플란트 주위염 자각증상과 만족도를 파악하여 다음과 같은 결과를 얻었다. 임플란트 주위염 자각자율은 식편압입이 40.5%, 출혈 49.1%, 통증 61.1%, 입냄새 61.9%였고, 만족도는 3.95점이었다. 보철방식에서 임플란트-자연치 연결군이 식편 압입(21.3%), 통증(35.5%), 입냄새(36.6%) 모두 가장 낮았고(p<0.001), 출혈은 임플란트 단일군(33.8%)이 가장 낮았다(p<0.05). 만족도는 임플란트-자연치 연결군(4.06점)과 골 이식을 하지 않은 군(4.03점)이 높았다(p<0.01). 요인분석 결과 임플란트 만족도는 임플란트-자연치 연결군에 비해 단일 임플란트군은 0.43배, 임플란트-임플란트 연결군은 0.44배 낮을 가능성을 나타냈다. 이상의 결과를 통해 인접한 자연치의 수명을 최대한 연장하면서 치아결손 부위의 기능을 회복할 수 있는 방법은 임플란트-자연치 연결방식이므로 다각적 검토를 통해 적극 활용할 수 있기를 기대한다.

옴니채널에서 식품쇼핑의 사용자 경험 디자인 연구 (A Study on Food Shopping User Experience Design of Omni-channel)

  • 김지해;김승인
    • 디지털융복합연구
    • /
    • 제14권7호
    • /
    • pp.403-409
    • /
    • 2016
  • 본 연구는 옴니채널 환경의 식품쇼핑 경험연구이다. 안전한 먹거리에 대한 관심은 IT의 발전에 따라 소비자의 다양한 요구에 합리적 방식으로 진화하며 이를 충족한 다양한 채널 증가로 이어졌다. 옴니채널은 소비자의 필요와 욕구를 채우는 것뿐 아니라 고객 행동 이해와 경험 가치를 부여한 실증적 사용자 유형 고찰이 필요했다. 온라인 설문 결과, (1)오프라인 식품쇼핑은 대 소형 마트, 1개월에 2~3회, 품질상태 고려, 신선식품을 직접 구매하기 위해 방문 (2)온라인 식품쇼핑은 온라인 커머스, 1개월에 2~3회, 가격/혜택을 고려, 과일/견과를 주로 구매로 나타났다. 이후 고관여자 8인의 심층면접에서 식품구매여정 4단계를 통해 식품쇼핑 경험을 파악하였다. '건강'과 '식단'을 식품쇼핑 핵심 가치로 한 퍼소나는 가족과 건강을 중요시하고 '절약'을 우선하는 프라이머리 퍼소나와 일과 개인을 중시하며 '자동수급'을 하는 원하는 세컨더리 퍼소나로 세분된 방안을 제시하였다. 본 연구를 통해 옴니채널 식품쇼핑 경험을 위해서는 건강하고 균형 잡힌 식생활의 맥락에서 기능과 서비스 방안을 모색하는 데 도움이 될 것으로 기대한다.

기능적인 가족의 커뮤니케이션에 관한 이론적 접근 (A Study on the Communication of the Functional Family)

  • 조윤경
    • 가정과삶의질연구
    • /
    • 제2권1호
    • /
    • pp.131-150
    • /
    • 1984
  • The purpose of this study is to explore the family as an interaction system, concentrating on the mutual influences between communication and family development; (1) how Communication patterns affect family relationships, and (2) how relationships among family members affect communication. In order to do this Galvin, Brommel used the following frame work; family is a system in which communication regulates cohesion and adaptability by a flow of message patterns through a defined network of evolving interdependent relationships. A family system consists of members, the relationships among them, the family attributes, the members attributes and an environment in which family functions. Within the framework of common cultural communication patterns, each family has the capacity to develop its own communication code based on the experiences of individual members and the collective family experience. Most of us develop our communication skills within the family context learning both the general cultural language and the specific familial communication code. Communication may be viewed as a symbolic, transactional process as the process of creating and sharing meanings. To say that communication is a process implies a continuous interaction of an indefinite large numbers of variables with a concomitant,. continuous change in the values taken by these variables. Finally the process implies change, Family functions include the primary functions of cohesion and adaptability, and supporting functions of family images, themes, boundaries, and biosocial issues. The primary functions reveal concepts integrated family interaction and supporting function, along with those of cohesion and adaptability, give shape to family life. the characteristics of developed relationships of richness, uniqueness efficiency, substitutability, pacing , openness spontaneity, and evaluation are reflected in the verbal and nonverbal behaviors with which family members negotiated a set of common meanings and develop thier own unique message system. The message system is the major element of communication process and influences both the form and the content of thier relationship and in create and share meanings. Family systems need to provide order and predictability for thier members, specifically focusing on communication rules and the networks by which messages are transmitted. Most rules emerge as a result of multiful interactions. There are basic rules and rules about rules, or metarules. Perceiving the rules of family system is very difficult because often family members don't think about the basic rules, much less the metarules. Breaking the rule may result in the creation of a new set because the system may recalibrate itself to accept more variety of behavior. Families develop communication networks to deal with the general issue. Family adaptability may be seen through the degree of flexibility in forming and reforming networks and networks become a vital part of the decision- making process and relate to the power dynamics operating within the family. Networks also play an integral part in maintaining the roles and rules operating with the family system. Thus networks and rules have mutual influence. The family -of -origin issues influence all aspects of family communication and account for many of the communication patterns, rules and networks and the role of the family -of-origin influences as a primary force for communication on behavior of newly forming systems. Each family system develops its own communication meanings. There is not one right way to communicate within a family but may be indefinitly large change of family life and communication behavior. Study on functional family communication helps to gain a better understanding of dynamics of family communication and ability of a new insight into the family.

  • PDF

네트워크 보안 환경에서의 현장적용 중심 암호품질 만족도 평가 메트릭스 설계 프로세스 (A Study of Quality Metrics Process Design Methodology for Field Application Encryption under Network Security Environment)

  • 노시춘;김점구
    • 융합보안논문지
    • /
    • 제15권5호
    • /
    • pp.29-35
    • /
    • 2015
  • 네트워크 보안 암호화 방식은 단대단 암호화 방식과 링크간 암호화 방식으로 구분된다. 네트워크 환경에서 보안 품질요구사항 이란 시스템이 제공해야 할 보안품질 속성의 수준이다. 품질속성은 관찰할 수 있고 측정할 수 있어야 하기 때문에 품질 요구사항도 가능하면 정확한 수치로 제시되어야 한다. 품질 요구사항이 정의되어야 구체적 품질 관리 목표가 설정된다. 품질속성에서 기능적 요구사항은 암호화를 통해 얻을 수 있는 서비스 기능에 대한 요구조건이다. 비 기능적 요구사항은 암호화를 통해 얻을 수 있는 서비스의 품질 요구조건이다. 본 연구에서 제안하는 암호화 품질 평가체계는 기능적 요구사항과 비 기능적 요구사항 2개영역으로 도출한다. 평가지표의 동일 분류내 척도를 산출한 후 각 지표의 품질 측정값에 대한 연계지표를 작성한다. 품질평가 매트릭스는 품질측정 값에 대한 연계지표 분석용 2-factor 평가로서 기능적 요구사항과 비기능적 요구사항 두 가지 기준으로 평균치를 산출 한다. 산출결과는 추세를 분석하여 종합 평가가 가능하도록 한다. 이와같은 방식을 적용할 경우 네트워크 보안 암호화 품질평가의 기반을 구성할 수 있다.

변화와 변용으로 본 근대기 서울 남산의 공원 (The Change and Transformation of Namsan(Mt.) Parks in Early Modern Seoul)

  • 박희성
    • 한국조경학회지
    • /
    • 제43권4호
    • /
    • pp.124-139
    • /
    • 2015
  • 남산은 수도 서울의 대표적인 랜드마크로, 여타의 다른 산과 달리 도심의 공원으로 인식되고 있다. 본 연구는 남산이 공원으로 인식되는 시점인 대한제국기와 식민지기를 주요 배경으로 변화와 변용의 과정 및 내용을 살폈다. 남산이 공원이 되고 공원이 다시 종교시설로 변용되는 일련의 과정이, 실은 일본의 도시 식민지화 과정과 식민지적 공간 통치와 연관되어 있음을 밝혔다. 일본이 왜성대공원(矮城臺公園)을 시작으로 경성공원(京城公園), 한양공원(漢陽公園)에 이르기까지 도성 안 남산을 모두 공원화한 것은 한성부에 대한 일본의 세력 확장과 관련한 것으로, 여기서 공원은 일본이 한성부를 점거하는 전략적 도구가 되었다. 그러므로 남산의 공원화는 단순히 위락과 여가시설의 확보가 아니라 공원 조성을 명분으로 한 타자의 공간 점유로 보아야 한다. 이 시기 남산의 공원 가운데 왜성대공원과 한양공원은 각각 경성신사(京城神社)와 조선신궁(朝鮮神宮)으로 변용되는데, 주체와 목적에 따라 그 양상은 점진적이기도 하고 폭력적이기도 하였다. 공원에 일본의 문화가 이식되고 공원이 지배자의 공간으로 치환되는 이러한 사실은 일본이 공원을 이용해 남산을 물리적으로 점거한 것과는 또 다른 공간 지배 양상을 의미한다. 즉 남산의 공원화가 한성부 내 일본의 세력을 확보하기 위한 수단이었다면 이후의 변용은 식민지 지배를 공간의 양태로 보여주는 것이다. 한편 남산은 공원이라 불렸지만 실제로 공원으로 이용된 시간은 매우 짧았다. 그나마 남산이 공원으로 인식될 수 있었던 것은 경성공원 일대의 산림자원 덕분인데, 그 배경에는 신사와 신궁을 위한 신원의 보존과 관리가 있다. 이 또한 식민 공간 통치의 결과로 이해할 수 있다.