• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.6
• /
• pp.765-781
• /
• 2000

The purpose of this study was to compare the screw loosening characteristics of three avail-able cementation type abutments: one-piece cementation type abutment; two-piece cementation type abutment using titanium abutment screw; two-piece cementation type abutment using gold abutment screw. Two implant supported three-unit superstructures were fabricated using a pair of 3 kinds of abutments for each experimental model. Cyclic loading was applied on the specimen, and made to stop when the superstructure showed movement over threshold range. The loaded cycle was counted until the machine stopped. Frequency analysis was done to measure the change of natural frequency before and after the application of cyclic load and to find the effect of screw loosening on the change of natural frequency. The specimen assembly was modeled to perform the finite element analysis to see the distribution of the stress induced by the application of preload over the screw joint and to compare the pattern of the distribution of stress induced by the external force with the change of the preload condition. The following results were obtained: 1. The failure loading cycle of two-piece cementation type abutment using gold screw was significantly greater than those of the other groups. 2. One-piece cementation type abutment applied to multi-unit restoration case did not show greater resistance to screw loosening compared to two-piece cementation type abutments. 3. Frequency analysis showed decrease in natural frequency when screw loosening occured.

• Journal of the Korean Statistical Society
• /
• v.17 no.1
• /
• pp.46-55
• /
• 1988

Two-piece double exponential distribution (TPDE) with one piece $(X \leq 0)$ having the scale parameter $\theta_1$ while the other piece (X>0) having $\theta_2$ is considered here. Distribution of the sum of n-independent variables from such a distribution is obtained. Special cases of this distribution are also treated. Next, distribution of the ratio of two independent (TPDE) variables is derived. As an extension, distribution of $x_1/x_2x_3$ is expressed terms of hypergeometric functions. A small table gives the power of the test regarding double exponential against (TPDE).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.101-113
• /
• 2016

This study was conducted in order to analyze draping and flat pattern according to jacket design, and provide basic materials for developing a jacket pattern that can enhance fitness, functionality, and aesthetic expression of clothes by reflecting esthetic expression of draping and efficiency of flat pattern at the same time. For the experimental jacket designs of a one-piece sleeve jacket and a two-piece sleeve jacket were selected among the entries of the designer Rubina for 2014 F/W Seoul Fashion Week. Designer brand Rubina usually produced clothes using draping and the designer brand company provided the experimental patterns for the study. We also had flat patterns of the same design and size specifications designed by a flat patternmaker who has 30 year-experience in flat pattern like Rubina. The test apparel jacket was made of 20's cotton yarns. Three models wore the jackets and evaluation on appearance fitness was conducted by 7 members in an expert panel group from August 10, 2015 to September 10, 2015. As a result of appearance fitness analysis on one-piece sleeve jacket, there were significant difference in 4 items among 17 items in terms of overall appearance. The appearance of jackets by draping had higher score than those using flat pattern. As for two-piece sleeve jacket, there were significant differences in 7 items among 17 items related to overall appearance. As for the items related to sleeve, 5 items out of 13 showed significant differences. Except for one item, appearance of jackets using draping had higher score than flat pattern. As for motion fitness, draping was evaluated to be more comfortable. Applying the items with high scores in appearance and motion fitness in draping to flat pattern, The study suggests a new jacket pattern development that would increase the satisfaction of consumers for future research.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.2
• /
• pp.89-92
• /
• 2012

PURPOSE. Adequate passive-fitting of one-piece cast 3-element implant-supported frameworks is hard to achieve. This short communication aims to present an alternative method for section of one-piece cast frameworks and for casting implant-supported frameworks. MATERIALS AND METHODS. Three-unit implant-supported nickel-chromium (Ni-Cr) frameworks were tested for vertical misfit (n = 6). The frameworks were cast as one-piece (Group A) and later transversally sectioned through a diagonal axis (Group B) and compared to frameworks that were cast diagonally separated (Group C). All separated frameworks were laser welded. Only one side of the frameworks was screwed. RESULTS. The results on the tightened side were significantly lower in Group C ($6.43{\pm}3.24{\mu}m$) when compared to Groups A ($16.50{\pm}7.55{\mu}m$) and B ($16.27{\pm}1.71{\mu}m$) ($P$ <.05). On the opposite side, the diagonal section of the one-piece castings for laser welding showed significant improvement in the levels of misfit of the frameworks (Group A, $58.66{\pm}14.30{\mu}m$; Group B, $39.48{\pm}12.03{\mu}m$; Group C, $23.13{\pm}8.24{\mu}m$) ($P$ <.05). CONCLUSION. Casting diagonally sectioned frameworks lowers the misfit levels. Lower misfit levels for the frameworks can be achieved by diagonally sectioning one-piece frameworks.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.125-137
• /
• 2021

This study was intended to develop a prototype of new Hanbok Cheollik one-piece based on design extracted through a preference survey on new Hanbok Cheollik one-piece. Through this, it was intended to provide information on patterns that are fundamental to the production of new Hanbok Cheollik one piece. The pattern of the experiment was produced by modifying D pattern, which was selected as excellent in the comparison of commercial Cheollik one-piece patterns. The SPSS 26.0 program was used to analyze the appearance evaluation of patterns. As a result of the 1^st evaluation of appearance and garment pressure, the shoulder, sleeve length, skirt length and sleeve width required modification, reducing the sleeve length by 8.0cm and the sleeve width by 1.0cm in total. The length of the skirt was reduced by 5.0cm and the shoulder end point was reduced by 0.5cm on both sides to modify the shoulder width. As a result of the 2^nd evaluation, the waist area, sleeve width, and skirt wrinkles were required to be corrected, reducing 2.0 cm waist width and 1.0 cm sleeve width and removing wrinkles on the front center and side area. The final pattern was highly appreciated. In future studies, it is thought that research should be conducted through study of Cheollik one-piece pattern according to material and age and the actual wearing experiment according to fabric and age.

• Journal of Fashion Business
• /
• v.14 no.1
• /
• pp.106-115
• /
• 2010

This study's purpose is to, first survey the traditional children clothing, clothing which doesn't get studied mostly. Second, to choose the factor that can modernize. Third, to design the present one-piece dress. Fourth, to gather an understanding about traditional children clothing and make a chance for children to wear the clothing that has a traditional factor. Traditional children clothes have a same shape with adults' clothes they use five primary color and use a pattern of a symbolic meaning which means healthy and long life. For ordinary wears there are Chimajogori and Bajijogori and for ceremonial dresses they wore Durumagi, Sagyusam which are Po and Dangui and headdress was added. The shape was considered by the children growth condition so the Gorum got longer. The dragon, cicadas, butterfly, phoenix and lots of flower pattern was used by the difference with the class. 5 one-piece design adapted Jogori, skirt, Dangui, Sagyusam, Magoja and used the traditional fabric by mixing the five primary color and the five secondary color was used to make traditional color. This study expects for a chance of children to wear traditional Hanbok or Hanbok-adapted clothes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.8
• /
• pp.1110-1118
• /
• 1999

This study was to examine the effects of garment types on thermal insulation using a thermal manikin. cotton polyester wool silk and rayon were selected as outer wears like a blouse a skirt slacks and one-piece for this study Acetate was chosen as a lining. Brief and upper innerwear with long sleeves(cotton) were also chosen as the innerwear. The results were as follows: 1. The thermal insulation of the garment of single layer was in proportion to the covering area of garment in all types of clothing. 2. On adding the innerwear or the lining or both the thermal insulation of the each garment of single layer were showed a different trends by garment types. The thermal manikin insulations of one-piece dress adding the innerwear was higher than those of blouse-skirt suits. The thermal insulation of one-piece dress adding the innerwear and lining was lower than those of blouse-skirt suits. 3. The increasing rates of thermal insulation of multi-layered garments had different value by garment types but garment made of rayon and silk were showed very high increasing rates of thermal insulation. 4. The increasing rates of the thermal insulation of one-piece dress added the lining the innerwear or both except polyester showed the highest value and then blouse-slacks suits' turn came ound Blouse-skirt suits had the lowest the increasing rates of thermal insualition value.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.31 no.2
• /
• pp.56-63
• /
• 2022

The mandibular 4 anterior incisor restoration has small teeth and a small space, so the choice of abutment is always a concern. The mandibular 4 anterior incisor extraction is caused by periodontal disease, interdental embrasure greatly open is advantageous of oral hygiene management. Try to make it small diameter with custom abutment, it is limited to the space for the screw. Rather than setting the post site of one body implant to a horizontal cross-section, it is advantageous to set it to a longitudinal cross-section, for interdental embrasure formation. When using an internal bone level implant, rather than using a two-piece abutment, using a one-piece abutment can more effectively secure space for interdental embrasure.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.613-618
• /
• 2008

As one way of cost innovation and weight saving of the automobile, the one-piece typed lower control arm was developed for the purpose of replacing the box typed lower control arm. In order to overcome less buckling strength of the one-piece typed lower control arm, the design parameters such as the high strength steel grade, the thickness and the shape of main panel were optimized based on Taguchi method.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.34-41
• /
• 2005

For assessing residual lift of the steam pipe in fossil power plants, inspections and analysis are usually focused on the critical locations such as butt welds, elbows, Y-piece and T-piece of the steam pipes. In predicting the residual life of T-piece, determination of local stress near welds considering system load as well as internal pressure is not a simple problem. In this study, stress analysis of a T-piece pipe was conducted using a three-dimensional model which represents the T-piece of a domestic fossil power station. Elastic and elastic-creep analysis showed the maximum stress level and its location. Residual creep rupture life was also calculated using the stress analysis results. It was argued that the calculated life is reasonably same as the measured one. The stress analysis results also support life prediction methodology based on in-field replication technique.