• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.21-30
• /
• 2011

As well known, dowel bars are used to transfer traffic load acting on one edge to another edge of concrete slab in concrete pavement system. The dowel bars widely used in South Korea are round shape steel bar and they shows satisfactory performance under bending stress which is developed by repetitive traffic loading and environment loading. However, they are not invulnerable to erosion that may be caused by moisture from masonry joint or bottom of the pavement system. Especially, the erosion could rapidly progress with saline to prevent frost of snow in winter time. The problem under this circumstance is that the erosion not only drops strength of the steel dower bar but also comes with volume expansion of the steel dowel bar which can reduce load transferring efficiency of the steel dowel bar. To avoid this erosion problem in reasonable expenses, dowers bars with various materials are being developed. Fiber reinforced plastic(FRP) dower that is presented in this paper is suggested as an alternative of the steel dowel bar and it shows competitive resistance against erosion and tensile stress. The FRP dowel bar is developed in tube shape and is filled with high strength no shrinkage. Several slab thickness designs with the FRP dowel bars are performed by evaluating bearing stress between the dowel bar and concrete slab. To calculated the bearing stresses, theoretical formulation and finite element method(FEM) are utilized with material properties measured from laboratory tests. The results show that both FRP tube dowel bars with diameters of 32mm and 40mm satisfy bearing stress requirement for dowel bars. Also, with consideration that lean concrete is typical material to support concrete slab in South Korea, which means low load transfer efficiency and, therefore, low bearing stress, the FRP tube dowel bar can be used as a replacement of round shape steel bar.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.613-623
• /
• 2000

The purpose of this study was to amount of the frictional forces with the brackets and wires, ligation methods, dry/wet, offsets, interbracket distances, velocity and to compare them each other by different conditions. This study tested 0.018'x0.025' slot sized 8 types of orthodontic bracket systems and 0.016', 0.016'x0.022' sized stainless steel, NiTi, Cu-NiTi orthodontic wires. One cuspid bracket were positioned on the slide glass and archwire was engaged into bracket and ligated with elastomeric modules. The values of frictional forces were measured with the instron universal testing machine. The results were as follows; 1. Polycrystalline ceramic bracket had the highest mean frictional forces and followed and by ceramic reinforced plastic bracket, metal bracket, plastic bracket with metal slot, monocrystalline ceramic bracket, single bracket, self-ligating bracket, friction free bracket in descending order. The self-ligating bracket showed low frictional forces in the round wires and high frictional forces in the rectangular wires. 2. Stainless steel wires had the least frictional forces and followed by NiTi, Cu-NiTi wires in descending order. Round wires had lower frictional forces then that of rectangular wires. 3. The stainless steel ligation method had significantly greater mean frictional forces them the elastomeric module ligation method. 4. Artificial saliva statistically increased the frictional forces in stainless steel wire, NiTi wire and Cu-NiTi wire. 5. There was a statistically significant difference with offset change 6. There was no statistically significant difference with interbracket distance in stainless steel wires but a significant difference in NiTi wires as the interbracket was decreased. 7 There was no statistically significant difference with velocity change. From the above findings, self-ligating bracket, stainless steel wires and the elastomeric module ligation method might be effective than any other materials to reduce the frictional forces in the orthodontic treatment and can be correlated to clinical situations seen in orthodontic patient care.

• Korean Journal Plant Pathology
• /
• v.2 no.2
• /
• pp.107-113
• /
• 1986

Each of 48 monoconidial isolates of Colletotrichum gloeosporioides Penz. obtained from diseased fruits of pepper was classified into strain G or strain R based upon pathogenicity to green and red fruits, morphology of conidia, and cultural characteristics in potato dextrose agar. The strain G was designated for isolates to cause anthracnose symptoms both on green and red fruits. All isolates of the strain G produced conidia abundantly. but produced no perithecia and setae in PDA. Conidia of all isolates in the strain G were attenuated or round at one end. The optimum temperature for mycelial growth of strain G was $26-28^{\circ}C$. The mycelia of strain G in PDA appeared to be whitish when young, and turned to be dark in old culture. Symptoms on pepper fruits caused by the strain G were somewhat sunken to be circular to elliptical lesions. Yellowish conidial masse were observed at the center of lesions, and the lesions turned to irregular shape and to reddish brown color in the later stage of disease development. No setae were visible on the acervuli. The strain R was designated for isolates to cause anthracnose symptoms only on red fruits of pepper. All isolates of the strain R produce conidia, and perithecia of Glomerella cingulata (Stonem.) Spauld. & v. Sch. in PDA. Some isolates of the strain R produced setae in culture under fluorescent light. Conidia of all isolates in the strain R were round and blunt at the ends. The optimum temperature for mycelial growth of strain R was the same as that of strain G. The mycelial growth of strain R was faster than that of strain G in PDA. The mycelia of strain R in PDA appeared to be gray to dark. Symptoms on pepper fruits caused by the strain R were circular to irregular black ring-spots Short setae or no setae were visible on the acervuli.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.3
• /
• pp.157-165
• /
• 1975

This experiment was carried out to evaluate the sanitary quality of commercially frozen sea foods. One hundred and sixteen samples in six different items from several refrigeration plant in Busan city were examined from March to December in 1974. In addition, the changes in bacterial density through the process from thawing, round or semifilleted frozen alaska pollack to the finishing as frozen fillet blocks were observed. To evaluate the sanitary quality, sanitary indicative bacteria such as total coliform, fecal coliform, fecal streptococci and enterococci as well as plate counts were determined. From the results, the median value of fecal coliform MPN was 20 per 100 grams of the samples and that of enterococci was 790. The median value of plate counts was $2.2\times10^4$ per gram. The plate counts were not correlated with the number of sanitary indicative bacteria. The results suggest that enterococci could be used advantageously in preference to coliform organisms as indicative bacteria for the evaluation of sanitary quality of frozen sea foods. The plate counts at $20^{\circ}C$ of the samples were 14 times higher than that at $35^{\circ}C$. Geometric mean of total coliform MPN was 310 and that of enterococci was 143. Bacterial density was reduced by fleering. Morethan 50 percent for total coliform MPN and $35^{\circ}C$ plate counts, and about 35 percent for enterococci MPN and $20^{\circ}C$ plate counts were reduced under the contact freezing unit which was generally operated at $-40^{\circ}C$. About fifty-five percent of the samples were negative in fecal coliform test and 10 percent of those were exceeded $1.0\times10^5$ per gram in $35^{\circ}C$ plate counts.

• Korean Journal of Veterinary Service
• /
• v.29 no.3
• /
• pp.347-364
• /
• 2006

This study is concerned with assessment of diethylnitrosamine (DEN 0.01 %) induced liver cell carcinogenesis by measurement of changes preceding the development of neoplasms. Therefore, it was undertaken to investigate changes of liver-specific enzyme activities in Sprague-Dawley (SD) rats by ad libitum feeding of DEN. And also. the changes of hepatic morphology in SD rats were detected by haematoxylineosin stain and immunohistochemistry (PCNA). 5- Fluorouracil (5- FU) is one of the most widely used anticancer agents for digestive cancers including hepatocellular carcinoma, and is known to affect the cell cycle and induce apoptosis of cancer cells. In the present study, SD rats were given drinking water containing 0.01% diethylnitrosamine (DEN) for 8 weeks. Minor behavioral change, brittleness of hair and decreased amount of water and diet intake were observed in rats 4 weeks after DEN administration. The body and liver weights were significantly (p < 0.05) decreased in rats 11 weeks after DEN administration. The liver weight ratio to body weight was rather stable and not significantly decreased in the all treatment groups. The liver specific enzyme activities (AST, ALT, ${\gamma}$-GTP) were significantly increased in all treatment groups compared to control group (p < 0.05). Variable size of liver tumor and hepatomegaly were observed in rats treated with DEN after 10 weeks. Numerous vacuoles were seen on the midzonal and or peripheral areas of hepatic lobules. The large and polymorphological hepatocytes with eosinophilic cytoplasm or densely basophilic mitotic nucleoli were seen. Several proliferative small round cells were seen on vacuolated and necrotic areas in peripheral hepatic lobules or portal areas. PCNA-positive cells were seen on the vacuolated portal areas and peripheral areas of hepatic lobules in the areas of small round cells. We examined functional and morphological changes of livers by 5 - FU treatments on DEN -treated rat. The DEN -treated rats compared to 5 - FU -treated rats after DEN treatment for 8 weeks. The serum total protein and triglyceride were significantly (p < 0.05) decreased, and the liver enzyme activities of AST and ALT were significantly(p < 0.05) increased. After 8 weeks, in the non-5-FU -treated group, the size of liver tumor were varied and hepatomegaly were observed, hepatocellular vacuolization, necrosis and steatosis were observed on the midzonal and peripheral areas of hepatic lobules. The large and polymorphological hepatocytes were seen, the interlobular connective tissues were proliferated. PCNA positive cells were seen in the portal areas and peripheral areas of hepatic lobules in the non-5-FU-treated group. In hepatocytes, condensation of nuclear chromatin and vacuolization were observed, shape of the nuclei were irregular, the degraded nuclei and organelles were observed. The livers of rats in the 5 - FU treatment group were seen grossly brilliant, red-brown color, and the vacuolated and degenerated regions, hyperplastic nodules were not nearly observed. In the electron microscope, the cytoplasm of the hepatocytes contained a large number of mitochondria, rough endoplasmic reticulum, developed organelles surrounding nuclei. The above findings suggest that 5 - FU will be effective as anti -liver tumor drug.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.467-477
• /
• 2001

This investigation was designed to determine the effects of wire size, bracket width and the number of bracket on bracket-wire dynamic frictional resistance during simulating arch wire-guided tooth movement in vitro. For simulation of an arch wire-guided tooth movement, we simulated tooth, periodontal ligament and cancellous bone. Maxillary premolar and 1st molar were simulated as real sized resin teeth, the simulated resin teeth which its root was coated by polyether impression material which its elastic modulus is similar to periodontal ligament were embedded in steel housing with inlay wax which its elastic modulus is similar to cancellous bone. Stainless steel wires in four wire size (0.016, 0.018, $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$ inch) were examined with respect to three (stainless steel) bracket widths (2.4, 3.0, 4.3mm) and the number of medium bracket(one, two, three) included in the experimental assembly under dry condition. The wires were ligated into the brackets with elastomeric module. The results were as follows : 1. In all the brackets, frictional resistance increased with increase in wire size. But, statistically similar levels of frictional resistance were observed between 0.018 inch and $0.016\;{\times}\;0.022$ inch wires in narrow bracket and also between 0.016 inch and 0.018 inch wire in wide backet. 2. The frictional forces produced by 0.016 inch wire were statistically similar levels in all the brackets. In 0.018 inch round wire, wide bracket was associated with lower amounts of friction than both narrow and medium brackets. In $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$ inch rectangular wire, wide bracket produced target friction than both narrow and medium brackets. In all the wirer, narrow and medium bracket demonstrated no statistical difference in levels of frictional resistance. 3. Frictional resistance increased with increase In number of medium bracket. 0.016 inch round wire demonstrated the greatest increment in frictional resistance, followed by $0.019\;{\times}\;0.025,\;0.016\;{\times}\;0.022$ inch rectangular wire which were similar level in increment of frictional resistance, 0.018 inch wire demonstrated the least increment. The increments of frictional resistance were not constantly direct proportion to number of bracket.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.10 no.2
• /
• pp.157-165
• /
• 2007

Purpose: Ingested foreign bodies are removed by endoscopy, surgery or spontaneous passage, however, the decision of therapeutic modality chosen depends on the type, size, shape and location of the ingested foreign bodies. Therefore, this study was conducted to investigate the rate and characteristics of foreign bodies that were passed spontaneously out of the intestine. Methods: One hundred and sixty patients who visited Samsung Medical Center for treatment of gastrointestinal foreign bodies between January 2001 to July 2007 were enrolled in this study. Related data was colleted by reviewing the medical records of patients with proven foreign bodies retrospectively, as well as by conducting phone interviews with the parents of the patients. All cases were classified based on the nature and location of the ingested foreign body, as well as whether it was treated by spontaneous passage. Results: Of the 160 cases involving the passage of foreign bodies in children were included in this study (95 boys and 65 girls), endoscopic removals, operative removals or spontaneous passages were conducted in 80, 3 and 77 patients, respectively. The spontaneous passage rates for each type of object were as follows; coins (36.5%), bead and baduk stones (83.3%), long and sharp materials (52.6%), magnets (69.2%) and disc batteries (50.0%). In cases involving round-shaped foreign bodies, such as coins, the diverse spontaneous passage rates were more diverse. When foreign bodies were stuck below esophagus, similar sized coins and baduk stones had spontaneous passage rates greater than 80% regardless of age. Conclusion: It is better for clinicians to wait for spontaneous passage to occur in cases involving coins or round-shaped foreign bodies that are located at or below the stomach.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.318-332
• /
• 2000

The purpose of this study was to investigate the effects of demineralized freeze-dried bone (DFDB) on mechanically exposed pulp of dog by evaluating the pulpal inflammation and healing process, formation of dental hard tissue, and structural changes of fibroblasts of the remaining pulp tissue. Teeth of 4 dogs, weighing 10kg, were used in this study. Class V cavities were prepared followed by exposed the pulp tissue mechanically by sterilized round bur. In control group, exposed pulps were capped with calcium hydroxide paste followed by sealed with IRM. In experimental groups, the exposed pulps of one group were capped with the collagen and those of the other group were capped with DFDB. All cavities were sealed with same manor as control group. The animals were sacrificed at the intervals of 3, 7, 14, and 28 days for histopathlogic evaluation. The specimens were observed by the light microscope and trans-electron microscope. The results were as follows: 1. Pulp necrosis was not observed in all groups. Inflammatory response was disappeared from 1 week in control group and group 2. But it was not disappeared until 2 weeks and also irregular arrangement of odontoblasts was showed at the lateral walls of root canal just beneath the amputated site of the pulp in group 1. 2. Dentinal bridge was formed incompletely at 2 weeks but it was formed completely at 4 weeks in control group. Odontoid tissue was also found in control group at 4 weeks from treatment. Amputated site of pulp was encapsulated with fibrous tissue and odontoblast and dentinal bridge was not found in group 1. Preodontoid tissue and reparative dentin which were formed by odontoblast differentiated around DFDB were found, but dentinal bridge was not found in group 2. 3. Cell with large basophillic-stained nuclei infiltrated to amputated site and DFDB at 1 week from treatment in control group and group 2. They were found more in group 2 than in control group. Odontoblasts arranged more regularly and reparative dentin was found more as time elapsed. 4. Dentin-formative odontoblasts which showed ultramicrostructure of cytoplasm with polarized nucleus, rEM, Golgi complex, secretory granules, secretion of organic matrix in control of group and group 2. In regards to above results, the demineralized freeze-dried bone(DFDB) induce odontoblastic differentiation and further come up to the dentin formation in amputated pulp.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.1-9
• /
• 2014

This article is the results of excavation data and it aims to interpret the composition facilities of the Royal garden at the Wanggung-ri site. The base of research was prepared through excavation and study on the royal garden at the Wanggung-ri site, which was constructed in Sa-bi period of Baek-je. The elements for the royal garden at the Wanggung-ri site were divided in 3 parts. - 1) Stonework facility 2) Installation for conveyance of water : Large moat-shaped ditch and Winding waterway(1~6 and water catchment) 3) Square cornerstone building. In this article, I arrange the basic data about facilities and function of the royal garden for making recovery of original form. First of all, I reason that stonework facilities were in charge to make space for catchment and boundary. Especially the Round angel rectangular stonework facility took charge of complex roles as catchment and water conveyance, and water can be transferred to the large moat-shaped ditch through joint between them. I confirmed that the round angel rectangular stonework facility and the large moat-shaped ditch which were connected by joint are one of the facilities in the royal garden. The large moat-shaped ditch protected the eastern, the northern walls and workshop site under the inclined plane to minimize the damage. Also, the large moat-shaped ditch took several roles, especially water catchments and landscaping. The large moat-shaped ditch was continually used from the period of Baek-je to the unified Silla, as a result it was completely deposited inside. After that, the 6 winding waterway were built in the western inclined plane with similar needs with the large moat-shaped ditch, and the square cornerstone building was built in same time. I noticed that the square cornerstone building was built as a part of the royal garden in Sa-bi period of Baek-je through the remains of Baek-je tiles around the building. After that, the square cornerstone building was built in same place as reconstruction.

• Journal of Veterinary Clinics
• /
• v.32 no.2
• /
• pp.141-147
• /
• 2015

Based on the results of previous studies, endoscopic biopsy sample's quality has a major impact on its adequacy for histopathology, and that the nature of the biopsy forceps can influence the specimen quality. The present study compared the effects of three different types of endoscopic biopsy forceps and two different operators on sample quality and adequacy for histopathology in three healthy cats. Every biopsy was performed between the major papilla and caudal duodenal flexure, and each operator performed five biopsies with each type of forceps on each cat, for a total of 90 biopsies. One pathologist evaluated the quality and adequacy of the obtained samples. Biopsies performed with large-cup forceps provided heavier and longer samples than the standard round forceps. With the same size forceps, the presence of alligator teeth had no effect on sample quality or adequacy for histopathological examination and assessment. Based on the results of the present study, although the standard round forceps could be used to obtain adequate samples for histopathology, large-cup forceps such as the standard oval and alligator jaw type have the advantage of obtaining high quality endoscopic samples.