• Earthquakes and Structures
• /
• v.17 no.1
• /
• pp.49-61
• /
• 2019

A novel asymmetrical resistance friction damper (ARFD) was proposed in this study to be applied on a rocking column base. The damper comprises multiple steel plates and was fastened using high-strength bolts. The sliding surfaces can be switched into one another and can cause strength to be higher in the loading direction than in the unloading direction. By combining the asymmetrical resistance with the restoring resistance that is generated due to an axial load on the column, the rocking column base can develop a self-centering behavior and achieve high connection strength. Cyclic tests on the ARFD proved that the damper performs a stable asymmetrical hysteretic loop. The desired hysteretic behavior was achieved by tuning the bolt pretension force and the diameter of the round bolt hole. In this study, full-scale, flexural tests were conducted to evaluate the performance of the column base and to verify the analytical model. The results indicated that the column base exhibits a stable self-centering behavior up to a drift angle of 4%. The decompression moment and maximum strength reached 42% and 88% of the full plastic moment of the section, respectively, under a column axial force ratio of approximately 0.2. The strengths and self-centering capacity can be obtained by determining the bolt pretension force. The analytical model results revealed good agreement with the experimental results.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.1
• /
• pp.57-66
• /
• 2005

SHACAL-2 is a 256-bit block cipher with various key sizes based on the hash function SHA-2. Recently, it was recommended as one of the NESSIE selections. This paper presents differential-linear type attacks on SHACAL-2 with 512-bit keys up to 32 out of its 64 rounds. Our 32-round attack on the 512-bit keys variants is the best efficient attack on this cipher in published literatures.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.5
• /
• pp.143-149
• /
• 2009

The hash function ARIRANG is one of the 1st round SHA-3 candidates. In this paper, we present preimage attacks on ARIRANG with step-reduced compression functions. Our attack finds a preimage of the 33-step OFF(Original FeedForward1) variants of ARIRANG, and a preimage of the 31-step MFF(Middle FeedForward1) variants of ARIRANG. Its time complexity is about $2^{241}$ for ARIRANG-256 and $2^{481}$ for ARIRANG-512, respectively.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.6
• /
• pp.59-65
• /
• 2010

Since an attacker can occur an error in cryptographic device during encryption process and extract secret key, the fault injection attack has become a serious threat in chip security. In this paper, we show that an attacker can retrieve the 128-bits secret key using fault injection attack on the for statement of final round key addition in AES implementation. To verify possibility of our proposal, we implement the AES system on ATmega128 microcontroller and try to inject a fault using laser beam. As a result, we can extract 128-bits secret key through just one success of fault injection.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.11
• /
• pp.4502-4521
• /
• 2020

At EUROCRYPT 2015, Todo proposed a new technique named division property, and it is a powerful technique to find integral distinguishers. The original division property is also named word-based division property. Later, Todo and Morii once again proposed a new technique named the bit-based division property at FSE 2016 and find more rounds integral distinguisher for SIMON-32. There are two basic approaches currently being adopted in researches under the bit-based division property. One is conventional bit-based division property (CBDP), the other is bit-based division property using three-subset (BDPT). Particularly, BDPT is more powerful than CBDP. In this paper, we use Boolean Satisfiability Problem (SAT)-aided cryptanalysis to search integral distinguishers. We conduct experiments on SIMON-32/-48/-64/-96, SIMON (102)-32/-48/-64, SIMECK-32/-48/-64, LBlock, GIFT and Khudra to prove the efficiency of our method. For SIMON (102)-32/-48/-64, we can determine some bits are odd, while these bits can only be determined as constant in the previous result. For GIFT, more balanced (zero-sum) bits can be found. For LBlock, we can find some other new integral distinguishers. For Khudra, we obtain two 9-round integral distinguishers. For other ciphers, we can find the same integral distinguishers as before.

• Acta Via Serica
• /
• v.6 no.2
• /
• pp.1-20
• /
• 2021

The Taq-i Bustan reliefs are representative works from the Sassanian dynasty of the 4th to 7th centuries. This study analyzes the costumes depicted in the Taq-i Bustan reliefs to gain understanding of the phenomena of cultural exchange between the East and West by observing the foreign cultural elements appearing in the Sassanian costumes of that time. Literature study and artifacts analysis were conducted in parallel. External elements appearing in Taq-i Bustan's costume were Greek-Roman and Central Asian. The tunics and trousers of the gods and the trousers of kings (Ardashir II, Shapur II and Shapur III) were made of thin fabric and showed many wrinkles, a characteristic of Greek and Roman clothing. On the spandrel above the arch of the great grotto of Khusrau II are depicted the goddesses of Victory, in a Greco-Bactrian style. Among the costume elements of Taq-i Bustan, there were also Central Asian elements observed. One Central Asian costume element was the round clasp ornament for tying the trousers. The side slits and hem of the tunic were presented in the style of the Sogd clothing of Central Asia in the 6th and 7th centuries, while the pearl rounded pattern was activated in Sogd, Kucha and Kizyl in the 7th and 8th centuries. These reliefs are considered important evidence of eastern influences in Sassanian culture.

• Journal of Distribution Science
• /
• v.20 no.11
• /
• pp.89-98
• /
• 2022

Purpose: Increasing competition in the higher education sector has prompted universities to enhance their marketing efforts and understand their potential customers. The study aims to explore how information sources are used and changed among prospective Vietnamese students during the decision-making process. Research Design, Data, and Methodology: This study undertakes a longitudinal study involving multiple rounds of data collection to better understand the decision-making process of prospective students. Data was collected from 12th -grade students in Vietnam through two rounds of quantitative surveys with 251 students and one round of qualitative interviews, spanning the duration of their senior year. The three stages of the decision-making process correspond to the three stages of pre-purchase period. Results: Most students decide that attending open days, taking career assessments, and looking up information online are the most important information sources to consider. The WOM sources are more important in the early stages, while university-generated sources and events are important in the later stages. Conclusion: Implications from this study may contribute to the design of more effective marketing communications campaigns as university marketers gain a better understanding of the distribution of information sources utilized for each specific stage of the decision-making process.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.2
• /
• pp.19-24
• /
• 2023

Recently, interest in renewable energy such as solar and wind power has increased as an alternative to fossil fuels. Renewable energy sources such as large wind farms require long-distance power transmission because they are located inland or offshore, far from the city where power is required. High-Temperature Superconducting (HTS) power cables have more than 5 times the transmission capacity and less than one-tenth the transmission loss compared to the existing cables of the same size, enabling large-capacity transmission at low voltage. For commercialization of HTS power cables, unmanned operation and long-distance cooling technology of several kilometers is essential, and pressure drop characteristic is important. The cryostat's spiral corrugation tube is easier to bend, but unlike the round tube, the pressure drop cannot be calculated using the Moody chart. In addition, it is more difficult to predict the pressure drop characteristics due to the irregular surface roughness of the binder wound around the cable core. In this paper, a CFD model of a spiral corrugation tube with a core was designed by referring to the water experiments from previous studies. In the four cases geometry, when the surface roughness of the core was 10mm, most errors were 15% and the maximum errors were 23%. These results will be used as a reference for the design of long-distance HTS power cables.

• Ocean Systems Engineering
• /
• v.14 no.3
• /
• pp.211-235
• /
• 2024

Th COP28 has emphasized the governments to speed up the transition away from fossil fuels to renewables such as wind and solar power in their next round of climate commitments. The steady and less turbulent wind over the ocean draws increased attention of governments, industries and researchers on exploring advanced technologies to extract energy from offshore wind. The present study numerically investigates the hydrodynamic behavior of a SPAR-type Floating Offshore Wind Turbine (FOWT) under various wave conditions and mooring line configurations. One of the major focuses of this study is investigating a freak wave's impact on a FOWT and determining its extreme responses. The study investigates the structural response under various wave impact for different configurations of mooring lines. The present study examines the wave-structure interaction under regular and freak wave conditions using numerical modelling approach. During the study, it is ensured that the natural frequency and wave induced motions of SPAR are inline with the experimental studies; thereby increasing the confidence in using the numerical model and domain for this investigation. The study considers the behaviour of slack and taut mooring arrangements under these wave conditions. The study observed that a taut mooring configuration can be efficient in restraining the FOWT motions, especially under a freak wave scenario. The Froude-Krylov force shows a non-linearity due to the non-uniform profile of the platform under all wave conditions. Overall, the study contributes to determining the performance of the mooring configurations under different wave conditions.

• Korean Journal of Human Ecology
• /
• v.12 no.1
• /
• pp.75-84
• /
• 2003

The objective of this paper was to analyse the foot type of female university students by the direct and indirect measure of foot and the measures of foot outline. The results were as follow: 1. The length and the width of foot were small and ankle slender and the modification of the big toe slight. 2. The analysis on the 16 measure items revealed five factors; the first factor was related to the width and girth of foot, the second one to the length of foot, the third one to the transformation of the little toe, the fourth one to the height of foot, the fifth one to transformation of the big toe. 3. The grouping on the shape of foot revealed three types. The inline angle of foot was the smallest in average in the type 1, while it appeared to be middle in the other types. The wider foot shapes were grouped as type 2 because their inline and outline angles of foot were the biggest in average. In the type 3, the big toe was curved a lot, since it was the largest in average. 4. From the naked eye measuring method, classification from which toe was popped-out told that Egyptian foot was 30.9%, Greek foot 27.9%. On the other hand, the instrumental method showed that Egyptian foot was 57.3%, Squared foot 35.3% and Greek foot 7.4%. 5. The result from the analysis about the traits of foot shape by the degree of the arch formation of bottom foot, showed that 33.8% had the normal foot, 66.2% slightly flat foot or middle one. There was no one with rigid flat foot. 6. The shoes size they declared were that 240cm was 33.3%, 235cm 18.1% and 245cm 18.1%. The shape of their shoe heel were flat heel(34.8%), cuban heel(25.5%), and narrow straight heel(19.9%); and that of the shoe toe were round toe(25.4%), oval toe(20.4%) and squared toe(20.4%). 7. The discomforting parts when they wear shoes were the little toe(35.4%), the rear of foot(13.9%), and the width of foot(13.9%), which was related to their dislike of shoe with the pointed toe.