• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.46-53
• /
• 1996

Micro drilling is one of the most important machining types and its necessity becomes more and more increasing in the whole field of industry. Micro drilling, however, has few the case of practical application, because it requests high techniques : manufacturing micro drill, treating chip, producting precise hole shape and progressing machining effeciency. Micro drilling has a technical problem: drill breakage from the lack of drill rigdity and the interuption of chip. It is, therefore, essential to select the proper cutting conditions and the step fed for the method solving the lack of rigidity and the interruption of chip. Especially, step feed is very efficient to avoid the breakage of drill, but bring about reducing of cutting efficiency. The study on step feed must be requested more than the present in the near future. The purpose of this paper is to investigate experimentally about cutting conditions which affect on tools and round errors and to estimate about the effect of step feed as well as optimal step feed size to solve the breakage of drill.

• Korean Journal of Veterinary Research
• /
• v.37 no.4
• /
• pp.817-823
• /
• 1997

Suckling piglets and weaned pigs showed anorexia, dehydration, severe abdominal breathing, emaciation and paresis from Oct. 1993. to Nov. 1993. Five 2-week-old piglets were submitted for diagnosis in Kangwon National University. At necropsy, the pin-point well demarcated yellowish white foci were scattered on the surface of the lung, heart, liver, spleen and kidney. Histologically, multifocal areas of necrosis with mononuclear cells infiltration were found in the lung, heart, liver, lymph node, spleen, kidney and small intestine. These lesions tended to be associated with blood vessels. Variable round to ovoid tachyzoites were located at the periphery of the lesions. The organisms were demonstrated as Toxoplasma gondii by immunohistochemical staining method. Ultrastructurally, this parasite was surrounded with parasitophorous vacuole in alveolar macrophage. The parasite was crescent-shaped and $6{\sim}8{\times}1{\sim}2{\mu}m$ in size. It was enclosed by an thick outer membrane and an underlying thin inner membrane. Several club-shaped paired organelles and conoids lay in the cytoplasm at the anterior. Numerous round body and one to several mitochondria were presented in the cytoplasm. Based on the gross findings, histopathology, immunohistochemical and electron microscopic findings, this case was diagnosed as toxoplasmosis in piglets.

• Journal of Chest Surgery
• /
• v.26 no.8
• /
• pp.654-660
• /
• 1993

The incidence of pulmonary leiomyosarcoma is very rare as a primary lung tumor. Usually, pulmonary leiomyosarcoma arise from the smooth muscle present in the bronchi or blood vessles. We had experienced two cases of primary pulmonary leiomyosarcoma. The first case was 28-year old male patient who had been in good health until admission, when he experienced an episode of dyspnea and sudden hemoptysis. The chest X-ray film revealed a large round tumor mass in left lower lobe measuring 6.5x9.5x5.3cm in dimension. On physical examination,the patient was friction rub and rales on the left lower chest and postoperative course was smooth and non-eventful. Emergency left lower lobectomy was performed due to repeated hemoptysis. Chemotheraphy was done postoperatively as an adjuvant therapy.The second case was 52-year-old man who had been well prior to admission, when recently he noticed a abrupt growing tendency of old pulmonary coin lesion in right lower lobe on routine physical examination. Since 1968, small round mass was gradually enlarged very slowly, during recent one year interval, the tumor mass was enlarged abruptly as twice in size on chest X-ray. Bronchoscopic examination revealed no specipic findings. Right lower lobectomy was performed and pathologic examination was answered as primary leiomyosarcoma without lymph node metastasis. Postoperative course was smooth, except local wound infection.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.25-31
• /
• 2011

In the tensile test necking occurs at the maximum load point and non-uniform stress state is generated in this section. The equivalent stress becomes quite different from the axial stress as necking proceeds. Methods for obtaining the true stress-true strain curves, by overcoming difficulties due to the necking phenomena, have been developed by many authors. One of the methods based on the finite element analysis simulation is a very promising method. In this paper, general-purpose finite element program is used to simulate the tensile test. A round specimen and a flat specimen prepared from the same steel block are tested and simulated. The true stress-true strain curves are determined without assuming that the material follows Hollomon's law.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.7
• /
• pp.1624-1637
• /
• 2013

In RFID systems, one important issue is how to effectively address tag collision, which occurs when multiple tags reply simultaneously to a reader, so that all the tags are correctly identified. However, most existing anti-collision protocols assume isotropic collisions where a reader cannot detect any of the tags from the collided signals. In practice, this assumption turns out to be too pessimistic since the capture effect may take place, in which the reader considers the strongest signal as a successful transmission and the others as interference. In this case, the reader disregards the other collided tags, and in turn, fails to read the tag(s) with weaker signal(s). In this paper, we propose a capture effect-aware anti-collision protocol, called Multi-Round Collision Tree (MRCT) protocol, which efficiently identifies the tags in real RFID environments. MRCT deals with the capture effect as well as channel error by employing a multi-round based identification algorithm. We also analyze the performance of MRCT in terms of the number of slots required for identifying all tags. The simulation results show that MRCT significantly outperforms the existing protocol especially in a practical environment where the capture effect occurs.

• Journal of Biosystems Engineering
• /
• v.31 no.4 s.117
• /
• pp.355-362
• /
• 2006

A one-dimensional heat conduction problem in cylindrical coordinate system was solved using Crank-Nicolson finite difference method to predicting the temperature distribution in rice storage bin with wall insulator. The model can simulate the grain temperatures in insulated round bins using the input data of initial grain temperature. ambient air temperature, wind velocity, solar radiation on a horizontal surface, and thermal properties of grain, bin wall, wall insulator, insulator cover, and air. Temperatures were collected at the bin center, 0.65m in radial direction from the center, and near the bin wall in 2.7m diameter bin filled with rough rice to depth of 3.0m were used to validate the simulation model. Grain temperatures predicted by the model were in very good agreement with the measured temperatures. The residual mean square error between measured and predicted grain temperatures at the bin center was $1.38^{\circ}C$.

• The Journal of the Korea Contents Association
• /
• v.16 no.5
• /
• pp.104-112
• /
• 2016

The Adaboost chooses a good set of features in rounds. On each round, it chooses the optimal feature and its threshold value by minimizing the weighted error of classification. The involved process of classification performs a hard decision. In this paper, we expand the process of classification to a soft fuzzy decision. We believe this expansion could allow some flexibility to the Adaboost algorithm as well as a good performance especially when the size of a training data set is not large enough. The typical Adaboost algorithm assigns a same weight to each training datum on the first round of a training process. We propose a new algorithm to assign different initial weights based on some statistical properties of involved features. In experimental results, we assess that the proposed method shows higher performance than the traditional one.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.2
• /
• pp.151-165
• /
• 2020

In this study, the pattern of texture was developed by applying the pattern shown in the Amita Yeoraebul and the Avalokitesvara with symbolism suitable for children's clothing. In addition, the design and the manufacturing of a children's wearable Hanbok were attempted, and the results are as follows: Amitha Yeoraebul is a Buddha who oversees paradise in Buddhism, and Avalokitesvara controls both paradise and the real world and provides mercy. Applying the various patterns in the Buddhist paintings, four daily hanboks for children were produced using patterns featuring symbolic the meanings of large round original patterns chrysanthemums, turtles, and lotus patterns. The lotus symbol represents love, nobility, and wealth, while the turtle symbol represents longevity, the chrysanthemum pattern symbolizes auspiciousness, and the large round original pattern means a constant continuation. To maintain the traditional hanbok form but allow convenient wear it in daily life, it is made in the jeogori + shorts, vest + long pants, and one-piece + jacket style. Currently, the daily dress of Hanbok and the modernization of traditional Korean clothes are being promoted. At this point, the study developed Hanbok fashion products that contain symbolic stories suitable for children are trying to maintain the image of traditional culture as much as possible.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.535-540
• /
• 2011

It is well known that abrasive waterjet (AWJ) was developed as a kind of high-density energy processing technologies. AWJ is used to obtain cutting quality of various materials such as metal, ceramics, glass and composite materials within a short manufacturing time because of the characteristics of heatless and noncontact processing. However, surface roughness and dimension error like round, burr, taper vary severely according to the processing conditions such as pressure, cutting speed, orifice diameter, stand off distance and abrasive flow rate. In this paper, the effect of the shape of mixing chamber on surface quality is studied. Three types of mixing chamber - round, parabolic, elliptical - are suggested and each performance is compared to that of cylindrical mixing chamber experimentally. From the result, is proved to be the optimal mixing chamber in the aspect of surface quality the parabolic one.

• Structural Engineering and Mechanics
• /
• v.16 no.2
• /
• pp.219-240
• /
• 2003

One of the most versatile approaches for analyzing the dynamic behavior of structural systems is direct time integration of semi-discrete equations of motion. However responses computed by time integration are generally inexact and hence the corresponding errors would rather be studied in advance. In spite of the various error estimation formulations that exist in the literature, it is accepted practice to repeat the analyses with smaller time steps, followed by a comparison between the results. In this paper, after a review of this simple method and disregarding the round-off errors, a more efficient, reliable and yet simple method for estimating errors and enhancing the accuracy is proposed. The main objectives of this research are more realistic error estimation based on the concept of convergence, approximately controlling the reliability by comparing the actual rate of convergence with the integration method's order of accuracy, and enhancement of reliability by applying Richardson's extrapolation. Starting from the errors at specific time instants, the study is then generalized to cases in which the errors should be estimated and decreased at specific events e.g. peak responses. Numerical study illustrates the efficacy of the proposed method.