• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.549-561
• /
• 2021

Indonesia has policies and strategies for the management of radioactive waste and spent nuclear fuel that arises from the use of nuclear research and development facilities, including three research reactors, and the use of radioisotopes in medicine and industries. The Indonesian government has provided extensive facilities such as an independent regulatory organization (BAPETEN) and a centralized radioactive waste management organization (CRWT-BATAN). Further, the presence of regulations and several international conventions guarantee the protection of the public from all risks due to handling radioactive waste and spent nuclear fuel. However, the sustainability of radioactive waste management in the future faces various challenges, such as disposal issues related to not only to site selection but also financing of radioactive waste management. Likewise, the problem of transportation persists; as an archipelago country, Indonesia still struggles to manage the infrastructure required for the transport of radioactive materials. The waste from the production of the radioisotopes, especially from the production of 99Mo, requires special attention because BATAN has never handled it. Indonesia should also resolve the management of NORM from various activities. In Indonesia, the definition of radioactive waste does not include NORM. Therefore, the management of this waste needs revision and improvement on the regulations, infrastructure, and technology.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.5
• /
• pp.837-844
• /
• 2022

In proportion to the rapid development of information and communication technology, the damage to copyright infringement is also increasing. In particular, as the OTT platform market has grown significantly in recent years, the speed and distribution of pirated copies that infringe copyright are increasing rapidly compared to the past. Accordingly, the country is trying to prevent copyright infringement by detecting and blocking illegal streaming sites, but it is difficult to expect great results due to the fast production of illegal streaming sites. Therefore, in this paper, we analyze the causes of rapid production of blocked illegal streaming sites, track and analyze 58 illegal streaming sites, and propose ways to effectively block illegal streaming sites based on the analysis results.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.4
• /
• pp.29-42
• /
• 2017

As the "Guidelines for GHG Environmental Assessment" was revised, it pointed out that the developers should evaluate GHG sequestration and storage of the developing site. However, the current guidelines only taking into account the quantitative reduction lost within the development site, and did not consider the qualitative decrease in the carbon sequestration capacity of forest edge produced by developments. In order to assess the quantitative and qualitative effects of vegetation carbon uptake, the CASA-NPP model and satellite image spatial-temporal fusion were used to estimate the annual net primary production in 2005 and 2015. The development projects between 2006 and 2014 were examined for evaluate quantitative changes in development site and qualitative changes in surroundings by development types. The RMSE value of the satellite image fusion results is less than 0.1 and approaches 0, and the correlation coefficient is more than 0.6, which shows relatively high prediction accuracy. The NPP estimation results range from 0 to $1335.53g\;C/m^2$ year before development and from 0 to $1333.77g\;C/m^2$ year after development. As a result of analyzing NPP reduction amount within the development area by type of forest development, the difference is not significant by type of development but it shows the lowest change in the sports facilities development. It was also found that the vegetation was most affected by the edge vegetation of industrial development. This suggests that the industrial development causes additional development in the surrounding area and indirectly influences the carbon sequestration function of edge vegetaion due to the increase of the edge and influx of disturbed species. The NPP calculation method and results presented in this study can be applied to quantitative and qualitative impact assessment of before and after development, and it can be applied to policies related to greenhouse gas in environmental impact assessment.

• Conservation Science in Museum
• /
• v.4
• /
• pp.23-32
• /
• 2003

As the kettle excavated from a site in Hwangnam-dong, Gyeongju was presumed to have been used as a melting crucible in a glass production workplace, we decided to prove its usage by scientific analysis. First, we performed conservation treatment to find the original status of the kettle, and then SEM-EDS and XRD analysis of the five corrosions created on the surface of the kettle. The fragment of the spout, which played a crucial role for the kettle to be considered as a melting crucible, was discovered during the conservation treatment. So the mouth rim of the kettle was restored to perfection. When we observed the microstructure of the metal sample, it was proved to be cast iron gradually cooled without heat treatment. In the corrosion products, the main components were Fe and O and other components such as P, Si, Ca, and S were found. The main compounds were quartz, vivianite, goetheite, akaganite, lepidocrocite, hematite, etc. Although these components were used as raw materials for making glass, these were found not in the melting status but mere raw materials. This can be an evidence to show these site where the kettle was excavated had been a glass production workplace. However, it is not sure that the kettle was used as a melting crucible. Moreover, if we consider the organic mold and sand clay accumulated in the well site when the kettle was excavated at first, we can see this as a formative factor of the corrosions of the kettle. Therefore, we concluded that the kettle is a typical cast iron and was not used as a melting crucible of glass.

• Journal of People, Plants, and Environment
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2020

The purpose of this research is to strengthen rural community empowerment by creating a tourism farm as a plan to reduce relative poverty and to improve the quality of life by creating jobs and increasing the income of local residents in underdeveloped countries. To do so, literature review, stakeholder interviews, on-site investigations, focus-group interviews, a project meeting for residents and a questionnaire survey were performed and analyzed and the results were as follows. First, Uganda has the potential to increase agricultural production based on its warm climate, fertile land and abundant natural resources. The quality of life of local residents is expected to be improved by realizing high-added values through the convergence of the conventional existing agricultural industry and other industries if the agricultural technology is properly transferred based on abundant labor force and low labor expenses. Opportunities for the success of the project can be spread to other rural villages across the country. Second, since local residents are now cultivating sugar cane, cassava, matoke, banana, coffee and so on as a farm owner, tourism agriculture with high-added values can be promoted by vitalizing communities based on farming technology to be transferred and a cooperative farm. It is also necessary to implement a rural community empowerment project to do so. Third, the university that is the cooperative partner of the project is positively considering to train experts by establishing a community development department, and, if necessary, a technical training center to educate the general public, which is expected to create synergic effects through the convergence of education, agriculture and tourism.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.11
• /
• pp.1577-1583
• /
• 2014

Encapsulation is a method used to protect material from certain undesirable environments, for controlled release at a more favorable time and place. Animal productivity would be enhanced if feed additives are delivered to be utilized at their site of action, bypassing the rumen where they are likely to be degraded by microbial action. A novel method of encapsulation with sesame gum was used to coat nitrate, a known enteric methane mitigating agent, and tested for the effect on methane reduction and other in vitro fermentation parameters using rumen fluid from cannulated Hanwoo steers. Orchard grass was used as basal diet for fermentation. The treatments were matrix (1.1 g sesame gum+0.4 g sesame oil cake) only, encapsulated nitrate (matrix+nitrate [21 mM]), free nitrate (21 mM), and a control that contained no additive. Analyses of fermentation parameters were done at 0, 3, 6, 9, 12, 24, and 48 h time periods. In comparison to control, both free and encapsulated nitrate produced significantly reduced (p<0.01) methane (76% less) and also the total volatile fatty acids were reduced. A significantly higher (p<0.01) concentration of ammonia nitrogen was obtained with the encapsulated nitrate treatment (44%) compared to the free form (28%) and matrix only (20%) (p = 0.014). This might suggest slow release of encapsulated nitrate so that it is fully reduced to ammonia. Thus, this pioneering study found a significant reduction in methane production following the use of sesame gum encapsulated nitrate that shows the potential of a controlled release system in enhancing sustainability of ruminant production while reducing/eliminating the risk of nitrite toxicity.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.3
• /
• pp.19-31
• /
• 2017

Plants are the basis for sustainable green growth, and the value of existence and importance of trees including landscape Plants can't be emphasized enough. Therefore, they are precious living things thriving in all sorts of public services, and continuous civil complaints for justifiable compensation of landscape Plants are filed. First, the standard formula of planting intervals according to production target specifications is calculated using root-collar caliper and diameter at breast height, and apply (1) standard medium sized trees which have not yet reached commercialization [deciduous tree production goal (R(B) less than 6cm]= (target standard)= [target standard $R(cm){\times}15{\times}0.7$]. (2) In case of commercialization(R6~R10)= [target standard $R(cm){\times}15{\pm}5%$], (3) In case of more than R12= [target standard $R(cm){\times}15{\times}130%$] shall be applied. In case of using diameter at breast height (4) In case of commercialization(B6~B10)= [target standard $B(cm){\times}20{\times}15{\pm}5%$], (5) In case of more than B12= [target standard $B(cm){\times}20{\times}130%$] shall be applied. Second, appraisal methods based on tree classification of compensation for loss are classified according to planted locations. (1) landscape trees within a house=[price of arrival at the site+planting cost], (2) landscape trees in places such as arboretum=[management technology of tress + relocation expenses considering scarcity of the trees (3) landscape trees in a place of loads= [landscape tree production cost + work out added price. In case of producted landscape threes (4) landscape trees ready to be commercialized as sales loss.

• Journal of Korean Society for Quality Management
• /
• v.45 no.2
• /
• pp.227-246
• /
• 2017

Purpose: This study proposes a Shiny-Sigma Methods that combines the advantages of Six Sigma method and Shainin method in order to solve field defect. Each technique has advantages and disadvantages. Methods: This study proposed Shiny-Sigma by combining Six Sigma has the logical advantage of the problem solving road map and Shiny has the merits of finding the root problem from the defective phenomenon. The Six Sigma method has the disadvantage that it is difficult to solve if the number of data is small, but the Shiny method has the advantage of finding the root cause with a small number of data. Results: As a result of applying Shiny-Sigma method to the field, it has advantages of solving the problem easily and quickly than the existing Six Sigma method. It does not require a lot of statistical knowledge, which helps field workers to use it. Based on these successes L Co. company has obtained the effect of improving the production quality by applying the Shiny-Sigma method. Conclusion: The Shiny-Sigma method proved to be suitable for the production site as a result of field application. It is suitable for field workers with low statistical knowledge and is suitable for field where data is difficult to obtain. This method is not a method to solve all the problems because there are problems that can be solved according to the field problems. We hope that this method will spread to many industrial sites and this method will have a great effect on the improvement of field production quality.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.41-48
• /
• 2006

Nowadays major shipbuilding companies are trying to expand their business not only to shipbuilding but to offshore projects as well. DSME is one of them. DSME is trying to set up a flexible design and construction environment for shipbuilding and offshore construction in a single shipyard. The shipbuilding and offshore projects, however, have their unique technology but they need to be designed and constructed in one site. To support this new requirement, DSME has developed an integrated CAD system for ship and offshore projects. In this integrated design environment, the designers can design commercial ships and offshore projects in a flexible manner. Concurrent design is very important for ship and offshore design. As compared to the complexity of the product, the design period is quite short. In effect, the design system for the ship and offshore project has to support concurrent design. One essential point of concurrent design environment is a product model based design system. DSME has developed and implemented the 3D product model concurrent design environment based on Tribon M3. Tribon is a widely used CAD system in shipbuilding area that is developed by Tribon Solutions. DSME has both customized the Tribon system and developed in-house application systems to support its own design and production procedures. All the design objects are modeled in one common database to support concurrent design and accurate production. The major in-house development focused on the modeling automation and automatic drawing generation. During the drawing generation process many of the additional production information are also extracted from the 3D product model. In addition, several applications and functionalities have been developed to apply the shipbuilding based Tribon M3 system to offshore projects. The development of shape nesting, tubular connection, isometric drawing, grating nesting systems are the typical.

• Journal of Applied Biological Chemistry
• /
• v.64 no.2
• /
• pp.105-112
• /
• 2021

Excessive accumulation of the amyloid beta (Aβ) peptide has been implicated in the pathogenesis of Alzheimer's disease (AD). Paeonia lactiflora (PL) has been used in treatments of several conditions such as inflammation, arthritis, and cognitive impairment. The purpose of this study was to investigate the neuroprotective effect and mechanisms of PL and its active compound, paeoniflorin (PF), on Aβ_25-35-induced neurotoxicity in SH-SY5Y cells. We evaluated cell viability, lactate dehydrogenase (LDH) release and reactive oxygen species (ROS) production. Furthermore, underlying mechanism of PL and PF on the regulation of amyloidogenic pathway was analyzed by Western blotting. In our results, Aβ_25-35-induced neuronal cell loss was observed, whereas treatment with PL (10, 50, and 100 ㎍/mL) and PF (1, 5, and 10 ㎍/mL) significantly elevated the cell viability, and decreased LDH release and ROS production. In addition, exposure of SH-SY5Y cells to Aβ_25-35 significantly increased the protein levels of amyloid precursor protein (APP)-C-terminal fragment β, β-site APP-cleaving enzyme, and presenilin-1 and -2. However, treatment with PL and PF inhibited the amyloidogenic pathway via the down-regulation of those protein expressions. Taken together, our results indicate that PL, and its active compound PF, could protect SH-SY5Y cells against Aβ_25-35-induced cell neurotoxicity by attenuating LDH release and ROS production, and these effects may be attributed to regulation of amyloidogenic pathway-related protein expression. In conclusion, PL and PF could be a potential to prevent neurodegenerative disorders such as AD.