• 산업공학
• /
• 제17권3호
• /
• pp.282-293
• /
• 2004

Line Balancing is the problem to assign tasks to stations while satisfying some managerial viewpoints. Most researches about the Mixed-Model Line Balancing problems are focused on the minimizing the total processing time or the number of workstations. Independently, some research reports consider the balance issues of the physical workloads on the assembly line. In this paper, we are presenting a new mathematical model to accomplish the line balance considering both the processing time and the workloads at the same time. To this, end, we propose an zero-one integer program problem, and we use the Chebyshev Goal Programming approach as the solution method. Some computational test runs are performed to compare the pay-offs between the processing time and the workloads. And, the test results show us that the reliable balanced work schedules can be obtained through the proposed model.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.359-367
• /
• 2004

In this research on-line model for the prediction of the effective strain distribution in strip on finishing mill process is presented. To describe the effective strain distribution in strip, three guide points and a distribution fitting variable are used. On-line models to get these points and fitting variable non-dimensionalization method and least square method were used with FEM simulation results. The model is developed using strip only FEM simulation as reference sets and compared with roll coupled FEM simulation results as perturbed sets. The on-line model to describe effective strain distribution shows good agreement with coupled FEM analysis results.

• 제어로봇시스템학회논문지
• /
• 제4권1호
• /
• pp.76-81
• /
• 1998

This paper presents an on-line scheme for parameter estimation of continuous-time systems, based on the model adjustment technique and the genetic algorithm technique. To deal with the initialisation and unmeasurable signal problems in on-line parameter estimation of continuous-time systems, a discrete-time model is obtained for the linear differential equation model and approximations of unmeasurable states with the observable output and its time-delayed values are obtained for the nonlinear state space model. Noisy observations may affect these approximation processes and degrade the estimation performance. A digital prefilter is therefore incorporated to avoid direct approximations of system derivatives from possible noisy observations. The parameters of both the model and the designed filter are adjusted on-line by a genetic algorithm, A set of simulation works for linear and nonlinear systems is carried out to demonstrate the effectiveness of the proposed method.

• 한국방재학회 논문집
• /
• 제8권3호
• /
• pp.105-115
• /
• 2008

도시화로 인한 유출량의 증가 및 도달시간의 단축은 도시재해의 한 원인이 되고 있다. 이를 막기 위하여 도시 배수유역내에 저류지를 설치하여 첨두도달시간을 지연시키고 방류량은 하수관거의 통수능 이하로 조절하는 방안을 활용하고 있다. 저류지를 설계 운영함에 있어서 사용되는 수문모형은 일반적으로 계획모형, 설계모형 및 운영모형으로 분류되고 있다. 본 연구에서는 재해영향평가서 22개소의 기 설계된 저류지를 분석대상으로 하여 여러 가지 저류지 계획모형의 적합성을 검토하였다. 저류지 계획모형으로는 삼각형, 사다리꼴 설계수문곡선과 경험적 공식을 이용한 11가지의 모형을 적용하였다. 저류지 계획모형의 분석에서 on-line 저류지의 경우는 사다리꼴 형태 설계수문곡선을 채택하고 있는 이종태 등 모형(1991)의 결과가 대상 저류지의 실저류량과 가장 유사함을 보였고, off-line 저류지의 경우는 삼각형 형태 설계수문곡선을 채택하고 있는 Abt and Grigg 모형(1978)의 결과가 비교적 양호한 결과를 보이는 것으로 나타났다.

• Journal of Information Technology Applications and Management
• /
• 제10권3호
• /
• pp.109-120
• /
• 2003

This paper proposes an e-business maturity model for small and medium-sized enterprises. The model consists of five maturity levels, which are on-line access, on-line business, matured on-line business, and full on-line business from least matured level to most matured level. The model can be used to assess e-business maturity level of individual enterprises. individual enterprise's maturity level can be assessed by examining sample check lists. Additionally, this paper summarizes the results of an application of the proposed model to a couple of small and medium-sized enterprises. This model can also be used to suggest what individual enterprises need to be upgraded towards higher maturity level.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.430-432
• /
• 2004

The standard power system model is needed to test a transmission line protective relay There are two methods to develop a power system model for transmission line protection. First method is based on characteristic power system model, and second method is based on functional power system model. This paper presents a standard power system model for performance test of transmission line protective relay, where the power system model is based on the two methods. And this model is simulated by using RTDS to test a protective relay.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.180-183
• /
• 2003

In this research, on-line model for prediction of effective strain distribution hi strip on finishing mill process is prescribed. It has been developed using several selected non-dimensional parameters and previously made average effective strain model via series of finite element process simulations, $\Delta$$\varepsilon$ was introduced to describe the effective strain distribution in strip. To confirm adequate non-dimensional variables uniqueness test was done. And to decide the order of polynomial in on-line model equation tendency test for each variables was done. The prediction accuracy of the proposed model is examined through comparison with finite element calculation results.

• 대한안전경영과학회지
• /
• 제4권2호
• /
• pp.83-101
• /
• 2002

In this thesis presents line balancing problems of two-sided and mixed model assembly line widely used in practical fields using genetic algorithm for reducing throughput time, cost of tools and fixtures and improving flexibility of assembly lines. Two-sided and mixed model assembly line is a special type of production line where variety of product similar in product characteristics are assembled in both sides. This thesis proposes the genetic algorithm adequate to each step in tow-sided and mixed model assembly line with suitable presentation, individual, evaluation function, selection and genetic parameter. To confirm proposed genetic algorithm, we apply to increase the number of tasks in case study. And for evaluation the performance of proposed genetic algorithm, we compare to existing algorithm of one-sided and mixed model assembly line. The results show that the algorithm is outstanding in the problems with a larger number of stations or larger number of tasks.

• 천문학회지
• /
• 제31권2호
• /
• pp.77-87
• /
• 1998

The accumulated knowledge of the influence of solar granulation on spectral lines, i.e. their asymmetry, provides a key to analyze stellar spectral line asymmetries. In this paper, a simple line synthesis using a simple 'model' of granulation was calculated. By adjusting the properties of the granule model, the observed imprints of convection on spectral lines can be reproduced. Since we depict convective flows using a continuous function rather than using a few components of flows (cf. Gray and Toner 1985, 1986; dravins 1990), we were able to identify which components of convection are important in line bisector shapes. The results of this study can be summarized as follows: Firstly, the intensity contrast (i.e. temperature fluctuation), and the area coverage of up- and down-flows are the two important factors which determine the line bisector shapes. Secondly, on the contrary to the assumption of other studies, the effect of horizontal flows is non-negligible. This exercise provides a qualitative understanding of the effect of convection on spectral lines. This knowledge serves as a guideline for understanding the characteristic difference in convection for stars on either side of the 'Granulation Boundary' (Gray 1982; Gray and Nagel 1989).

• 소성∙가공
• /
• 제28권2호
• /
• pp.83-88
• /
• 2019

This paper introduces a new concept - on-line FE model, as applied to metal rolling. The new technology allows for completion of process simulation within a tiny fraction of a second without loss of high-level prediction accuracy inherent to FEM. The three steps of an on-line FE model design namely, process metamorphosis, mesh design, and process variable design, are described in detail. The procedure is demonstrated step by step through designing actual on-line models for the prediction of the dog-bone profile in edge rolling. The validity and prediction accuracy of the on-line FE models are analyzed and discussed.