• 마케팅과학연구
• /
• 제13권
• /
• pp.135-158
• /
• 2004

본 연구에서 온라인 소비자들이 재방문단계(revisit stage)와 구매의사결정 단계(decision-making stage)에서 어떤 방문행동 특성상의 차이를 보이고 있는가를 파악하기 위한 목적을 가지고 있다. 인터넷 쇼핑몰 시장에서 어떤 방문행동특성을 가진 온라인 소비자들이 지속적으로 같은 사이트를 방문하고, 구매행동을 하는지에 관한 정보는 사이트 관리자의 입장에서 볼 때 수익성 제고 측면에서 공헌하는 바가크다. 특히 본 연구에서는 2단계 Mixture Model 율 이용하여 온라인 소비자들의 방문행동 특성을 파악함으로써 인터넷 쇼핑몰의 경쟁력을 강화활 수 있는 세분시장 결정방법을 제시하고자 한다. 또한 사이트 재방문단계 (revisit stage) 와 구매의사결정 단계 (decision-making stage) 훌 통한 온라인 소비자들의 방문 행동 특성 정보는 사이트 경쟁력 강화를 위한 전략적 시사점율 제공해줄 것으로 기대된다. 본 연구는 온라인 소비자들의 구매의사결정이 재밤문단계 (revisit stage) 와 구매단계 (purchase stage) 라고 하는 2단계 의사결정과정을 거치고 있음을 보여주는 실증분석을 통해 온라인 소비자들의 방문행동 특성을 파악하여 이에 적합한 대응전략을 전개할 수 있음을 논의함으로써 온라인 소비자들의 방문행동 특성을 사이트 밀착도 및 항해유형에 따라 파악할 수 있다는 학문적 공헌점을 제시 하고 있다.

• 한국컴퓨터산업학회논문지
• /
• 제8권4호
• /
• pp.245-252
• /
• 2007

본 논문은 기존 전용선을 이용하는 대신에 PLC(Power Line Communication)를 이용하여 인터넷성능을 평가하고자 한다. 많은 통신망 장비와 작업의 어려운 문제를 단순히 전력선만으로 해결하고자한다. 이와 같이 전력선으로 인터넷을 이용하면 작업의 어려운 문제뿐만 아니라 초기 비용적인 측면에서도 크나큰 이득이 될 수 있다. 따라서 본 논문은 전력선을 이용하여 인터넷 이용이 어느 수준까지 활용할 수 있는가를 평가, 고찰해보고, 향후 전력선으로 인터넷을 활성화할 수 있는가에 대해 타당성을 고찰하였다.

• Journal of Communications and Networks
• /
• 제10권3호
• /
• pp.351-361
• /
• 2008

This paper presents a delay-margin based traffic engineering (TE) approach to provide end-to-end quality of service (QoS) in multi-protocol label switching (MPLS) networks using differentiated services (DiffServ) at the link level. The TE, including delay, class, and route assignments, is formulated as a nonlinear optimization problem reflecting the inter-class and inter-link dependency introduced by DiffServ and end-to-end QoS requirements. Three algorithms are used to provide a solution to the problem: The first two, centralized offline route configuration and link-class delay assignment, operate in the convex areas of the feasible region to consecutively reduce the objective function using a per-link per-class decomposition of the objective function gradient. The third one is a heuristic that promotes/demotes connections at different links in order to deal with concave areas that may be produced by a trunk route usage of more than one class on a given link. Approximations of the three algorithms suitable for on-line distributed TE operation are also derived. Simulation is used to show that proposed approach can increase the number of users while maintaining end-to-end QoS requirements.

• Journal of Nutrition and Health
• /
• 제36권10호
• /
• pp.1061-1070
• /
• 2003

The purpose of this study was to investigate differences in the diet with the amount and the qualitative assessment of nutrient intakes by the economic level. Data from the 1998 Korean Health and Nutrition Survey were used. Using the poverty line based on the 1998 Korean minimum cost of living, Subjects (n = 10400) were classified into high class (36.1％), middle class (40.7％) and low class (23.1％). Chi-square-test and Analysis of Variance following Duncan's multiple range test were used to test the difference in nutrient intake pattern among three groups ($\alpha$ = 0.05). The amount of nutrient intake and nutrient intake adequacy were statistically different by the economic level (p<0.01). The ratio of energy intake from carbohydrate is higher than the criteria of WHO recommendation in all economic levels. Especially people in the low class depended much on the carbohydrate for the energy intake. The ratio of energy from the protein and fat are lower in the middle and low class than that of the high class. The Intake level of calcium and vitamin B$_2$ were lower than those of the Recommended Dietary intake level, regardless of economic status. It also showed differences in major food sources of nutrients by the economic level Consequently, it seems that the nutrition policy and program should be prepared according to their economic status. Also, there should more detailed studies to find out the nutrient intake pattern, their determinant, and health consequences.

• 대한치과보철학회지
• /
• 제18권1호
• /
• pp.7-13
• /
• 1980

The purpose of this study was to evaluate the removable partial denture prescriptions including surveyed crowns and design of component parts sent to the laboratory technician. A total of 351 casess with prescription forms and master cast in maxillary and mandibular semi-edentulous situations collected from dental laboratory by random sampling were selected for this study. The evaluation and study observed here involved the classification of edentulous situations, status of abutment splinting, form of rest seats and guiding plane of surveyed crows, location of maxillary major connectors and tripodig marks on the master casts. Removable partial denture prescriptions contained (1) general request (upper and lower cast framework), (2) types of metal, (3) location of retainer(retention, lingual bracing, rest area, guiding plane surface), (4) location and type of major connector, (5) relief area and amount, (6) and other specific instructions. The following informations based on the classified groups such as Group I was those cases sent with no real prescriptions. They say 'make a partial.' No prescriptions, no thought beforehand, Group II was those cases sent with a minimal prescriptions. They say 'make a partial with clasps on May be some preparations, usually inadequate. Group III was those cases sent with a moderately good prescription. Adequate but could be much better. No tripoding but it tell what clasps go where. Still not good prescriptions. Group IV was good cases, tripoded with adequate prescriptions and a prescription which exactly describes what is expected from the laboratory. The analyzed results were as follows: 1. The normal form of rest seats and guiding plane of surveyed crowns in Class. I and Class. II edentulous situations on the maxillary cast were observed 31.9% and 27.89%, respectively. The abutment teeth and retainer without occlusal rests of Class. I and Class. II were showed 11.58% and 8.86%, respectively. In mandibular cases, the normal form of rest seats and guiding plane of surveyed crowns showed 27.54% and 8.82% in Class. I and Class. II situation. The abutment teeth and retainer without rest seats were showed 15.19%, respectively. 2. The splinted surveyed crowns of Class. I and Class. II maxillary edentulous situations in distal extension cases were showed 34.51% and 28.85%, but 28.52% and 10.29%, respectively. 3. The location and type of maxillary major connector delineated on the master cast were 66 cases (44.89%). 4. The results of 351 cases were classified as Group I 146(41.59%), Group II 115 (32.76%), Group III 57 (16.23%), and Group IV 33 (9.48%). 5. The delineation of abutment tooth for clasping were 176 cases (50.14%) among total of 351 cases. 6. The delineation of height of contour line were showed 45 cases (12.8%) in Group II, 14 cases (3.98%) in Group III and 33 cases (9.40%) in Group IV with total 92 cases (26.21%). 7. In surveying procedure, the delineation of tripoding marks and reference line were showed 17 cases (4.84%).

• 한국실내디자인학회논문집
• /
• 제38호
• /
• pp.201-208
• /
• 2003

Shipboard architecture and design has now become a specialty In its own right. As rationalized as the process of ship' design and built is, it continues to produce some remarkable fleet image. Cruise line has created a number of the hall mark identities and the interior design features of its own. It is to develop a design theme for a reference ship which sets a particular image for later new buildings to follow in same class. When a new class Is created later, key design element will be retained, with some items being changed and new ideas introduced. Thus the approach has the flexibility to grow and change as the industry itself evolves and diversifies. There are a number of notable examples which illustrate how different line are thus able to create and maintain unique product hallmarks and identities through the interior design of their fleets.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.220-227
• /
• 2002

Now, Korea National Railroad is planning many ways to increase the maximum operating speed of train up to 200km/h by 2010. Among those ways, connecting conventional line with the KTX is the strongest alternative. Mostly, conventional lines are consisting of both KS50N and KS6O rail. However, the excessive abrasion might be occurred between wheel and rail when the KTX designed to operate on UIC60 is operating on the conventional line. On this study, new standard of 60kg-class rail considered suitability for both KTX and wheel used in conventional line is presented. It seems to be an effective solution for increasing maintenance costs expected when commercial speed of conventional line is increasing.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.387-396
• /
• 2002

Batch processes are a significant class of processes in the process industry and play an important role in the production of high quality speciality materials. Examples include the production of semiconductors, chemicals, pharmaceuticals, and biochemicals. With on-line sensors connected to most batch processes, massive amounts of data are being collected routinely during the batch on easily measured process variables such as temperatures, pressures, and flowrates. In this paper, multivariate SPC charts for on-line monitoring of the progress of new batches are developed which utilize the information in the on-line measurements in real-time. We propose the formation of statistical model which describes the normal operation of a batch at each time interval during the batch operation. An on-line monitoring scheme based on the proposed method can handle both cross-correlation among process variables at any one time and auto-correlation over time. And the control limits for the monitoring charts are established from sound statistical framework unlike previous researches which use the external reference distribution. The proposed charts perform real-time, on-line monitoring to ensure that the batch is progressing in a manner that will lead to a high-quality product or to detect and indicate faults that can be corrected prior to completion of the batch. This approach is capable of tracking the progress of new batch runs, identifying the time periods in which the fault occurred and detecting underlying cause.

• 동의생리병리학회지
• /
• 제18권3호
• /
• pp.939-941
• /
• 2004

Phototherapy have perpetual history, we can see an instance of it in Yellow Emperor's Conon of Medicine(黃帝內經) and Laser therapy is a field of Phototherapy being used frequently in the latest time. We treated patients with telangiectasia by laser therapy and experimented it's efficacy and studied the means of clinical application in Korean medicine. We report the capabilities of application of laser therapy, based on Korean medical theories by using resemblance between laser therapy with kyung-rak(經絡) control technique in the line that connects with the past.

• 한국통신학회논문지
• /
• 제25권5A호
• /
• pp.717-725
• /
• 2000

최근 수년간 얼굴인식에 관한 많은 알고리즘이 개발되었고 그 대다수가 view와 투사에 기초한 알고리즘이었다. 본 논문에서의 투사는 비단 직교 기저상에 영상을 투사하는 것으로 국한하지 않고 영상 화소값을 변환하는 일반적인 선형 변환으로써 상관관계, 주성분 분석, 클러스트링, gray scale 투사, 그리고 추적 필터매칭을 포함한다. 본 연구에서는 FERET 데이터베이스 상의 얼굴 영상을 평가한 알고리즘들을 세부적으로 분석하고자 한다. 투사에 기초한 알고리즘은 3단계로 구성된다. 첫 번째 단계는 off-line상에서 행하며 알고리즘 설계자에 의해 새로운 기저가 설정되거나 또는 학습을 통해 새로운 기저를 결정한다. 두 번째 단계는 on-line상에서 행해지며 영상을 설정된 새로운 기저상에 투사한다. 세 번째 단계는 on-line상에서 행해지며 영상내의 얼굴은 가장 인접한 이웃 분류자로 인식된다. 대부분의 평가 방법들은 단일 gallery 상에서의 성능 평가가 이루어짐으로써 알고리즘 성능을 충분히 측정하지 못하는 반면 본 연구에서는 독립된 galley들의 집합을 구성함으로써 각각의 다른 galley상에서 가지는 변화와 이들의 상대적 성능을 평가한\ulcorner.