• ETRI Journal
• /
• v.38 no.4
• /
• pp.787-797
• /
• 2016

Mining, construction, and other special vehicles for heavy use are designed to work under high-performance and off-road working conditions. The driving and executive mechanisms of the support structures and superstructures of these vehicles frequently operate under high loads. Such high loads place the equipment under constant risk of an accident and can jeopardize the dynamic stability of the machinery. An experimental investigation was conducted on a refuse collection vehicle. The aim of this research was to determine the working conditions of a real vehicle: the kinematics of the waste container, that is, a hydraulic rotate drum for waste collection; the dynamics of the load manipulator (superstructure); the vibrations of the vehicle mass; and the strain (stress) of the elements responsible for the supporting structure. For an examination of the force (weight) on the rear axle of a heavy vehicle, caused by its own weight and additional load, a universal measurement system is proposed. As a result of this investigation, we propose an alternative system for continuous vehicle weighing during waste collection while in motion, that is, an on-board weighing system, and provide suggestions for measuring equipment designs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.76-95
• /
• 2019

An on-board truck scale is an essential technical solution for preventing overload, which makes the driver aware of the commercial vehicle weight. This study analyzed the effects of the driving pattern and transportation efficiency by the IoT Platform service for an on-board truck scale. A comparison of before and after installation using the long-term monitored data confirmed the reduction effects both of the overload ratio and overweight value, and their effects on increasing the transportation efficiency. In addition, the analysis result of the driving route showed that the installation of an on-board truck scale could be a more effective way of preventing overload than increasing the weighing checkpoints.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.74-87
• /
• 2020

Overloaded trucks are the main source that threatens road safety and directly affects the reduction of pavement life. The On-board truck scale is the only equipment that could prevent overloading by measuring and adjusting the loading weight before driving. Legislation is needed to encourage its installation so that the driver can prevent overloading. In this study, an on-board truck scale system was installed on 30 dump trucks for transporting construction waste, such as soil and aggregates, which are major loads of 36.55% for overloading, and the trucks were monitored remotely. The overload prevention effect was analyzed by comparing driving data for 1 month before distribution of the weight display app that can recognize the weight to the driver and 1 month after distribution. After installation, overloading could be 6.1% reduced, and the transportation efficiency could be increased by checking the weight provided from the On-board truck scale system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.686-693
• /
• 2018

After the Sewol ferry-sinking incident in 2014, the public interest in safety at sea increased. In order to save and secure the initial response time required for sea rescues, not only the rescue organization, but also the victim needs to save and maintain golden time to secure the necessary time for rescue personnel. The purpose of this study was to investigate ways to maintain the psychological stability of victims during their rescue in the case of a mass rescue operation by using the oil boom installed on board oil spill response vessels. Through buoyancy tests and the development of oil booms in sea areas, it confirmed the buoyancy of two adults weighing 70 kg each per meter of oil boom could be maintained when a lifeline was installed on the side of the oil boom, and that it was possible to keep afloat four persons weighing 70 kg each on both sides of the oil boom. It also confirmed the buoyancy for three adults weighting 70 kg each per eight meters was maintained when riding on the top of the oil boom. As a method of rescue, it was found that the fastest and most accurate way to rescue victims was a rescue boat held at the rear end of the oil boom to lead to victims. In conclusion, the rescue team could utilize the oil boom installed on board the oil spill response vessel located near the marine accident site to save and secure the initial response time required for the rescue team to arrive. The victims in distress holding onto the lifeline or riding on the top of oil boom kept afloat at sea could maintain their psychological stability until the mass rescue operation initiated.

• Smart Structures and Systems
• /
• v.6 no.3
• /
• pp.277-290
• /
• 2010

Internationally the load carrying capacity of bridges is decreasing due to material deterioration while at the same time increasing live loads mean that they are often exposed to stresses for which they were not designed. However there are limited resources available to ensure that these bridges are fit for purpose, meaning that new approaches to bridge maintenance are required that optimize both their service lives as well as maintenance costs. Wireless sensor networks (WSNs) provide a tool that could support such an optimized maintenance program. In many situations WSNs have advantages over conventional wired monitoring systems in terms of installation time and cost. In order to evaluate the potential of these systems two WSNs were installed starting in July 2007 on the Humber Bridge and on a nearby approach bridge. As part of a corrosion prevention strategy, a relative humidity and temperature monitoring system was installed in the north anchorage chambers of the main suspension bridge where the main cables of the bridge are anchored into the foundation. This system allows the Bridgemaster to check whether the maximum relative humidity threshold, above which corrosion of the steel wires might occur, is not crossed. A second WSN which monitors aspects of deterioration on a reinforced concrete bridge located on the approach to the main suspension bridge was also installed. Though both systems have provided useful data to the owners, there are still challenges that must be overcome in terms of monitoring corrosion of steel, measuring live loading and data management before WSNs can become an effective tool for bridge managers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.119-119
• /
• 2020

Globally, the demand for food and water resources are increasing rapidly with the growing concerns of meeting the projected population upsurge, specifically by 2050. The global population is projected to hit 9.8 billion in 2050 while the food demand is expected to increase by 77% from the 2007 base year. Moreover, the already scarce water resources, especially in the food-producing regions, expected to be significantly affected as food production already accounts for over 70% of the global water resources. However, the estimated food demand encapsulated the actual demand for both human consumption and animal feed in addition to the exuberant food waste at the consumption stage of the supply chain, notably in the developed countries. Managing the food consumption demand and food waste can have across-the-board benefits on water resources and other associated food production impacts. This study assessed the water-saving potentials through food waste in Korean households using the food waste data obtained from the direct weighing analysis. The household food waste collection and characterization were carried out during the summer (July), fall (September), and winter (December) seasons of 2019. The water footprint related to the food waste within Korean households was based on the water footprint concept, i.e. indirect water use. The results of our estimation showed that an average Korean household wasted 6.15 ± 4.36 kg daily, amounting to 12.53 ± 11.10 m3 of water resources associated with the waste. On the per capita basis, an average of 0.024 ± 0.017 kg/capita/day of food was wasted resulting to 0.049 ± 0.044 m3/capital/day of water resources wasted. The food waste types that accounted for the principal share in the water footprint were beef, soybean, rice and pork with values 30.7, 10.1, 9.6, and 7.5%, respectively. Considering that the production of meat and meat products are water intensive and the agricultural water use in Korea is largely for rice production, addressing the food waste of these two important agricultural products can be a hotspot for water saving potential in the country. This study therefore provides an insight to addressing the water scarcity in the country through reducing household food waste.