• Title/Summary/Keyword: omni-directional antenna

Search Result 156, Processing Time 0.03 seconds

A MAC Protocol using Directiona Antenna to Solve Deafness Problem (Deafness 문제를 해결하기 위한 지향성 MAC 프로토콜)

  • An, Han-Soon;Hong, Sung-Peel;Kahng, Hyun-Kook
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.11a
    • /
    • pp.917-920
    • /
    • 2007
  • 무선 Ad-hoc 네트워크에서는 주로 IEEE 802.11 MAC 프로토콜을 이용한다. IEEE 802.11 MAC 프로토콜은 제어 메시지인 RTS-CTS를 통해서 채널 예약을 하고 데이터를 전송하는 방식으로 모든 통신에 Omni-directional 안테나를 이용하여 전송한다. 본 논문에서는 기존 IEEE 802.11 MAC 프로토콜보다 성능을 향상시키기 위해서 directional 안테나를 이용한 MAC 프로토콜을 사용한다. Directional 안테나를 사용한 MAC 프로토콜은 IEEE 802.11 MAC 프로토콜에 비해서 Spatial Reuse를 증가함으로서 채널 자원을 더욱 효율적으로 사용하는 것이 가능하다. 또한 Directional 안테나의 사용은 안테나의 지향성에 따른 안테나 이득 및 전송 범위의 증가 그리고 전송 범위를 Omni-directional 안테나와 동일하게 적용할 경우에는 저 전력 통신이 가능하다는 장점을 가지고 있다. 그러나 Directional 안테나의 사용은 IEEE 802.11 MAC보다 좋은 성능을 갖기는 하지만 새로운 문제들이 발생한다. 이러한 문제들로는 New Hidden Terminal, Deafness, Capture, 그리고 위치 인식에 관련된 문제들이 발생한다. 본 논문에서서 위에서 언급한 Directional 안테나의 이점과 그리고 문제점에 대해서 설명하고, 이러한 문제들 중에 Deafness 문제를 완화시킬 수 있는 방법을 제안한다. 그리고 QualNet 4.0을 이용한 시뮬레이션을 통해서 제안된 프로토콜의 성능을 평가한다.

  • PDF

Design of GPS Receiving Antenna Installed in a Missile's Warhead (미사일 탑재형 GPS 안테나 설계)

  • Lee Jong-Min;Woo Jong-Myung
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.17 no.9 s.112
    • /
    • pp.900-912
    • /
    • 2006
  • A GPS receiving antenna installed in the missile's warhead is designed and fabricated at a center frequency 1.575 GHz. The circular shaped antenna is installed in the middle of the warhead where the antenna's patch and the ground plane are connected with a hollow cylindrical shaped short pin. Using the dual feeding and phase difference method, an omni-directional radiation pattern which direction is normal to the missile's axis(H-plane) is obtained. The optimized diameters of the circular patch and the cylindrical ring typed shorting pin of the GPS receiving antenna which use the FR4.material(dielectric constant $\varepsilon_r=4.6$) are 59.5 mm and 14 mm, respectively. The cylindrical body with diameter 100 mm and height 500 mm is attached to the lower part of the warhead in order to complete the missile figure. The radiation patterns are measured by changing the angle and phase between the dual feeding points. When the phase difference of dual feeding is $100^{\circ}$ and the angle between the dual feeding points is $100^{\circ}$, the nearly omni-directional radiation pattern in the H-plane is obtained. In this case, the antenna gain is -5.55 dBd and the relative level difference between the maximum and the minimum radiation intensity is 3.98 dB.

A Multi-Antenna Mobile Measurement System for DTV Coverage Measurement (DTV 커버리지 측정을 위한 다중 안테나 이동측정시스템)

  • Jeong, Young-Seok;Yang, Hae-Sool
    • Journal of Digital Convergence
    • /
    • v.11 no.11
    • /
    • pp.85-94
    • /
    • 2013
  • This paper presents a novel mobile measurement system with multi antennas which enable mobile measurement as well as fixed measurement with telescope mast. Proposed system installed 4 omni directional antennas for the space diversity process and one directional log periodic antenna for the simultaneous conventional fixed measurement. Whole antenna systems are connected to the custom DTV channel analyzers with Ethernet networks respectively and processed by the main controller to calculate real time average receive levels. To prove the performance of proposed system, the typical receive models are categorized as 3 area types - open area, building area and house area, and then intensive field tests were performed through mobile and fixed measurement phases. With these measurement data, the relationships between mobile and fixed measurement are analyzed, and the concept of compensation factor is proposed to assume the average receive level of signal. The field test is fulfilled as a co-work with public broadcasters and the proposed system is applied to the intensive coverage measurement projects for metropolitan areas by the korean government agencies.

A Design of Printed square Loop Antenna for Omni-diractional Radiation Patterns (전방향 복사페턴의 인쇄형 사각 루-프안테나 설계)

  • 이현진;차상진;임영석
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.40 no.11
    • /
    • pp.93-98
    • /
    • 2003
  • In this paper, we designed a printed square loop antenna for operating of PCS and IMT2000 band. The proposed antenna has omni-directional radiation patterns with broad bandwidth, similar to the conventional antenna, to easy feed on composing single planar. We obtain an ideal impedance matching and increase bandwidth. An antenna bandwidth is about 150MHz(1.74∼l.89〔GHz〕) at 1$^{st}$ resonance frequency and 290MHz(1.95∼2.24GHz) at 2$^{nd}$ resonance frequency on VSWR(equation omitted)1.5, and then we can obtain not only 1.73∼l.87 〔GHz〕 PCS band but also 1.92∼2.17 (GHz) IMT2000 band. band.

Compact 0th Order Antenna for 2.4 GHz ISM Band (2.4 GHz ISM대역용 소형 0차 공진 안테나)

  • Do, Sang-In;Yoo, Jin-Ha;Lee, Young-Soon
    • Journal of Advanced Navigation Technology
    • /
    • v.19 no.1
    • /
    • pp.60-65
    • /
    • 2015
  • In the present study, compact $0^{th}$ order resonant antenna for 2.4 GHz ISM frequency band is newly proposed. In case of wireless communication systems such as wi-fi, bluetooth and Zigbee, antennas with omni-directional radiation pattern are necessary because of the demands for uniformly received electric field strength without variation for direction. It is well-known that $0^{th}$ order resonant antennas are not only advantageous for miniaturization but also have advantage of maintaining omni-directional radiation pattern. The proposed antenna is composed of two-element array in which the size of unit element should be smaller than ${\lambda}/4$ correspondent to the resonant length of typical monopole antennas The proposed antenna which is placed at middle and upper side of PCB with $50{\times}50mm^2$ size is designed and fabricated within limited space of $8{\times}5mm^2$. The measured impedance bandwidth ($S_{11}{\leq}-10dB$) is about 100 MHz (2.4~2.5 GHz) which corresponds to quite wide bandwidth in comparison with the antenna size, and also the measured peak gain over the passband is more than 3 dBi which is thought to be slightly wider than the other $0^{th}$ order resonant antenna.

Analysis of Monopole Antenna Equipped with a Reflector for UWB Systems (UWB 시스템용 반사판을 갖는 모노폴 안테나 분석)

  • Kim, Yeong-Jin;Choi, Dong-You
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.23 no.10
    • /
    • pp.1261-1268
    • /
    • 2019
  • In this paper, we present the analysis of a novel monopole antenna with a reflector. The proposed monopole antenna is printed on a TRF-45 substrate, and the reflector, which is positioned near the base of the antenna, is printed on the FR-4 substrate. Positioning the reflector near the base of the antenna was found to suppress current radiation toward the back of the monopole antenna. Comparative analysis of the proposed monopole antenna and a conventional monopole antenna without a reflector revealed that the bandwidths of the antenna with and without a reflector were 2.65 GHz and 2.88 GHz, respectively. Additionally, the antenna without a reflector was observed to have a bi-directional radiation pattern in the E-plane, and an omni-directional radiation pattern in the H-plane. However, only the antenna with a reflector was found to suppress back radiation, and provide non-uniform directional radiation in the E-plane and H-plane.

A Compact Folded Patch Antenna for Omni-Directional Radiation Patterns (전방향성 복사 패턴을 갖는 소형 평면 패치 안테나)

  • 서영훈;김태영;김명기;박익모;서용교;송기무
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.12 no.7
    • /
    • pp.1094-1101
    • /
    • 2001
  • The design of a compact folded patch antenna with moderately broad bandwidth is presented in this paper. The proposed antenna has radiation characteristics that are similar to the conventional monopole antenna. However, since this antenna is designed in a planar form, it has smaller size than that of a conventional monopole antenna. We have investigated the resonance frequency and bandwidth characteristics of the proposed antenna by changing the antenna design parameters. The proposed planar form of a monopole antenna in this paper has 1.17 GHz bandwidth with a matching circuit at the center frequency of 6.05 GHz.

  • PDF

Path Loss Characteristics in Subway Platform at 2.45GHz Band (2.45GHz 대역의 지하철 플랫폼에서 경로손실 특성)

  • 최낙일;공민한;강영진;송문규
    • Proceedings of the IEEK Conference
    • /
    • 2003.07a
    • /
    • pp.318-321
    • /
    • 2003
  • In this paper, path loss and delay profile characteristics are measured in the subway platform. To evaluate the fading characteristics of the measured signals, the standard deviations are computed. The standard deviation is bigger for shorter distance. The shorter the distance, the bigger the phase difference between direct wave and reflected waves according the distance, which results in heavy fading. To compute the path loss according to distance, the average values of path loss exponent(n) is evaluated. The path loss exponents measured in the subway environment for Omni-VP(omni-directional vertical polarization) antenna and CP(circular polarization) antenna are 1.418 and 1.680, respectively, which are considerably less than 2.0, the free space path loss exponent.

  • PDF

Printed Type Half-wavelength Small Loop Antenna (프린트형 반파장 소형 루프 안테나)

  • Ryu, Hong-Kyun;Woo, Jong-Myung
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2005.11a
    • /
    • pp.245-248
    • /
    • 2005
  • In this paper, small sized half-wavelength circular loop antenna which attached beneath a visor of helmet is designed and fabricated at the resonant frequency of 449MHz. To reduce the size of the antenna, double series-shorted stubs are inserted inside the loop for practical use of a vacant space of loop inside. Also, It is designed for the printed type to install the helmet easily. The size of antenna on helmet is reduced to 87.75%(diameter : 70mm, height :.36mm) compare with general type antenna(diameter : 200mm height 101mm). The return loss, -10dB bandwidth and gain are -13.2dB, 17.6MHz(3.9%), and -1.78dBd. And, radiation pattern is omni-directional pattern at H-plane. Therefore, it can be seen that the half-wavelength circular loop antenna using double series-shorted stubs is proper structure for the miniaturization and the installed antenna of the helmet.

  • PDF

Design of Planar Modified Folded Loop Antennas for S-DMB band (위성 DMB 대역을 위한 수정된 폴디드 루프 안테나)

  • Lee, Hyeon-Jin
    • The Transactions of the Korean Institute of Electrical Engineers P
    • /
    • v.61 no.1
    • /
    • pp.1-4
    • /
    • 2012
  • In this paper, the planar type modified folded loop antennas for S-DMB band is proposed. The proposed antenna consisted of opened center of a conventional closed loop and folded terminal of microstrip line to inside loop antenna. The sizes proposed antenna was minimized by folding the terminal of the loop. Also, It was minimized reactance value by increasing capacitances between coupled microstrip line. Therefore the proposed antennas compacted about 20% than a conventional loop antenna and increased efficiency of antenna. The proposed antennas got an omni-directional pattern, the antenna gain was 3.67 [dBi] and the bandwidth was 900 MHz (2.6-3.56 GHz) with VSWR${\leq}$2 from the simulated and the measured results. The frequency utilization coefficient was 29.9 %. These properties could satisfy the S-DMB band.