• Tribology and Lubricants
• /
• 제14권2호
• /
• pp.21-25
• /
• 1998

This paper presents the experimental results of the friction characteristics of double liptype oil seals which show an improvement in sealing performance over single lip-type oil seals. The major differences between two oil seals are the number of contact lip, and seal materials; Nitrile Butadine Rubber(NBR) and urethane rubber. The measured results show that the friction torques of double lip seals show 12-17% increases compared with those of single lip-type seals. But the sealing performance and service life of double lip oil seals have been increased and stabilized due to an optimized design of the seal lip and material properties.

• 대한기계학회논문집B
• /
• 제34권5호
• /
• pp.457-464
• /
• 2010

사고로 해양에 유입된 기름을 제거하는 대표적인 방법은 기계적 회수, 화학적인 처리, 수면소각, 미생물에 의한 분해 등이 있으나, 2차오염의 가능성을 방지할 수 있는 기계적인 회수법이 최상으로 생각된다. 기계적 유회수 형태는 벨트, 디스크, Weir, Vortex, 흡입, 드럼, 브러쉬 방식 등이 있다. 저자는 합목적적인 방법으로 회수능력을 개선할 수 있는 실험을 위한 잠수공 모델을 만들었다. 본 스키머의 원리는 외부 액체(물과 기름)를 스키머에 유입시키면, 비중 차에 의해 기름은 뜨고 물은 가라앉는 것이다. 본 스키머는 탱크 바닥의 잠수공으로 물은 빠져나가 스키머 내에 물은 최소로 남고 기름은 모아 회수하는 위어타입의 혁신적인 것이다. 유회수량과 유회수율을 결과로 보였다. 유회수율은 1차 집유탱크의 기름층이 두꺼워지면 증가한다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.123-128
• /
• 2000

The ocean is now increasingly suffering from pollution mainly caused by oil spill accidents roil increasing marine transportation. It cause not only the deterioration of ocean resources but also critical damage on the ocean ecosystem. Present study is an experimental one for the development of the oil skimmer which can collect spilled-oil actively and effectively from the sea surface. As an effort of achieving it, a new type of water wheel attached nil skimmer was devised, based upon the concept of orifice. The shapes of the water wheel, blades and oil storing tank are found to be very important factors on the oil skimming performance through systematic experimental analysis. Real oil recovery test was also carried out in square tank using the oil skimmer with their optimal shapes. Quite satisfactory result are obtained from the test which showed 99% and 98% recovery rates for light oil and heavy oil in still water condition, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.365-374
• /
• 2001

Its a tendency to strengthen related international was as the importance on marine oil pollution recently becomes the issue. According to the regulation of IMO, oil discharge from ships is allowed under 15PPM only and oil filtering equipment is essential. Oily water separator of laminated plate type which is one of gravity type separator can be use as assistant equipment for the oil filtering system to meet the present IMO standard, because it fits well to process large amount of rich oil with high specific gravity. The purpose of this paper is to investigate an efficiency of oil/water separation with the characteristics of laminated plate arrangement. The analyse of oil contents for oil-water mixture were carried out in order to find an efficiency of oil/water separation and an experimental study was simultaneously carried out to investigate internal flow characteristics of separator by visualization method and PIV(Particle Image Velocimetry) measurement at three spaces of plates for 5, 10 and 15 mm with variation of inlet flow rates of $0.25m^3$/h and $0.5m^3$/h. The experimental results showed that the space of the plates acts a significant role in the separating process.

• 유공압시스템학회논문집
• /
• 제7권1호
• /
• pp.1-5
• /
• 2010

This paper presents the experimental results of the radial piston type oil pump with new mechanism for a metal diaphragm hydrogen compressor. Generally, metal diaphragm type hydrogen compressor systems are operated by oil hydraulic power. In this system an oil compensating pump has been demanded to compensate for a leakage oil head chamber. The metal diaphragm type hydrogen compressor consists of an oil compensating pump, commonly used hydraulic piston pump and driven by main crank shaft. The radial piston type oil compensating pump with new rolling contacted piston mechanism is developed and experimented. The developed piston element of the radial piston pump consists of piston, steel ball, return spring, two check valves, eccentric cam and ball racer. In this study, designed 4 type pistons as and orifice hole. Operating characteristics and pressure ripple characteristics are tested under no load to 60bar loaded with every 20bar increasing step and pressure ripple and flow rate are experimentally investigated.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.64-72
• /
• 2001

According to the regulation of IMO, oil discharge from ships is allowed under 15ppm only and an oil filtering equipment is essential. However, for large ships using heavy fuel oil of over S.G 0.98 and viscosity 380cSt and system oil, it has been in difficulty to process with existing filtering type of oily water separator. A parallel plate type oily water separator which is one of gravity type separators can be used as an assistant equipment for the oil filtering system to meet the present IMO standard of 15 ppm, because it is an efficient method in dealing with a large amount of rich oil with high specific gravity. This work is focused on the fundamental investigation of the performance of the plate type oily water separator by visualization method and PIV(Particle Image Velocimetry) measurement to acquire multi-point velocity data simultaneously. The experimental results showed that the space of the plates acts a significant role in separating process and it was found that an important point to minimize a vortex flow is to flow a large amount of fluid in space of the plates in order to promote the efficiency of separation.

• 한국수소및신에너지학회논문집
• /
• 제15권2호
• /
• pp.119-128
• /
• 2004

DME(Dimethyl Ether) was directly produced from the synthesis gas using the slurry phase reactor. The catalyst for DME production prepared two types (A type; Cu:Zn:Al=57:33:10, B type; Cu:Zn:Al=40:45:15, molar ratio). It was evaluated for the effect of the reaction medium oil using the small size slurry phase reactor. DME production yield and the methanol selectivity decreased in the order: n-hexadecane oil> mineral oil> therminol oil. The long-term test of DME production was carried out using A and B type catalyst, and n-hexadecane oil and mineral oil, respectively. It was confirmed that the use of A type for the catalyst and n-hexadecane for the reaction medium oil was very useful for the viewpoint of the DME production form the synthesis gas.

• 상하수도학회지
• /
• 제12권2호
• /
• pp.31-41
• /
• 1998

As the leakage of crude oil from tankers breaks out frequently, it caused a serious problem for ocean pollution and calls for developing treatments to handle the leaked crude oil and mitigate the pollution. Thus it is required to develop new purification technolgies and appropriate treatment systems which have sufficient treatment capability in order to cope with the anticipated ocean pollution. In this experiment, A and B type heavy oils were used to make the emulsion of both water containing heavy oil and sea-water containing heavy oil. The following are the main results from this study ; 1. When A and B type heavy oils were added to the original sea-water and treatedin the homogrenizer respectively, the particle of oil beacame smaller in both cases. Under the same condition, while the initial oil density of sea-water containing B-heavy oil is higher than of emulsion with A-heavy oil, the particle of A-heavy oil is finer than that of B-heavy oil. 2. When A and B type heavy oils were added to distilled water and treated in the homogenizer respectively, the particle was more dispersed and finer than that in the case of sea-water in both cases. In this result, the water containing oil formed more stable emulsion than the sea-water containing oil. 3. In this experiment, all emulsions showed oil in water types. 4. Since the oil particle is larger in the sea-water than in the distillated water, interms of elimination of oil, it is thought to be more important to give Membrane treatment after implementing sandfilter, activity carbon, coagulation-sedimentation and floating separation as pre-treatment.

• Journal of Nutrition and Health
• /
• 제26권1호
• /
• pp.3-12
• /
• 1993

This study was performed to investigate effects of dietary fat content and degree of saturation on the function of the immune system. Sixty male BALB/c mice average-weighing 17g were divided into three dietary groups: 5% safflower oil group, 20% safflower oil group, 19.3% beef tallow & 0.7% safflower oil group. Food intake and body weight were measured every day. At 4th, 7th, 10th week after dietary treatment, organ weight measurements, delayed-type hypersensitivity test, plaque forming cell test, agglutination test, differential white cell count and histological examination of spleen were performed. Results are follows; 1) Body weight, food intake and calorie intake were not different in the three dietary groups during the experimental period($\alpha$=0.05). 2) Liver weight was significantly higher in 5% safflower oil group($\alpha$=0.05). Spleen index was slightly higher in mice fed 5% safflower oil and 19.3% beef tallow & 0.7% safflower oil. Thymus index in all mice was decreased by aging. 3) Delayed-type hypersensitivity of the mice fed 5% safflower oil and 19.3% beef tallow & 0.7% safflower oil was significantly higher than that of the mice fed 20% safflower oil. 4) The number of plaque forming cell was significantly reduced at 10th week compared to 7th week in all group($\alpha$=0.05). Although there was no difference in plaque forming cell among three groups at 10th week, 5% safflower oil group showed slightly higher plaque forming cell than 20% safflower oil group at 7th week. 5) At 4th week, agglutination test seems to be higher in 5% safflower oil group and 19.3% beef tallow & 0.7% safflower oil group compared to 20% safflower oil group. 6) Percentage of neutrophil and eosinophil was slightly reduced in 20% safflower oil group. 7) Spleen tissue was not affected by and dietary treatments. According to our results, the higher the fat content & unsaturation of the diet the lower the cell-mediated immunity of the mice. Humoral-immunity did not appear to be affected by the dietary manipulation. However humoral-immunity was decreased significantly by aging in all dietary groups.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.22-28
• /
• 2008

A closed type crankcase ventilation system has been adopted to engines to prevent emission of blow-by gas to atmosphere. In the early closed type crankcase ventilation system, blow-by gas which contains engine lubricating oil is re-circulated into the intake system. The blow-by gas containing oil mist leads to increased harmful emissions and engine problems. To reduce loss of the engine oil, a highly-efficient oil separation device is required. Principle of a cyclone oil separator is to utilize centrifugal force in the separator and, therefore, oil separator designs depend on rotational flow which causes the centrifugal force. In this paper, flow characteristics and oil separation performances for cyclone type designs are calculated with CFD methodology. In the CFD model, oil particle was injected on a inlet surface with Rosin-Rammler distribution and uniform distribution. The major design parameters considered in the analysis model are inlet area, cone length and outlet depth of the oil separator. As results, reducing inlet area and increasing cone length increase oil separation performance. Changes in outlet depth could avoid interference between rotational flow and outlet flow in the cyclone oil separator.