• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.599-612
• /
• 2015

The development of renewable energy technologies that can replace fossil fuels is environmentally important; however, such technologies must be economically feasible. Economic analyses are important for assessing new projects such as geothermal heating-cooling systems, given their large initial costs. This study analyzed the economics and carbon dioxide emissions of: a SCW (standing column well), a vertical closed loop boiler, a gas boiler, and an oil boiler. Life cycle cost analysis showed that the SCW geothermal heating-cooling system had the highest economic feasibility, as it had the highest cost saving and also the lowest carbon dioxide emissions. Overall, it appears that geothermal systems can save money when applied to large-scale controlled agriculture complexes and reclaimed land.

• Journal of Embryo Transfer
• /
• v.32 no.3
• /
• pp.193-200
• /
• 2017

The purpose of this study is to confirm whether spontaneous adipocyte generation during chondrogenic induction culture affects the chondrogenic differentiation of porcine skin-derived stem cells (pSSCs). For this purpose, chondrogenic differentiation characteristics and specific marker gene expression were analyzed using cell lines showing different characteristics of spontaneous adipocyte formation. Of the four different lines of pSSCs, the pSSCs-IV line showed higher Oil red O (ORO) and glycosaminoglycan (GAG) extraction levels. Quantitative real-time polymerase chain reaction (qRT-PCR) analysis revealed that the levels of adipogenic markers peroxisome proliferator-activated receptor gamma 2 ($PPAR{\gamma}2$) and adipocyte Protein 2 (aP2) mRNAs were significantly higher in pSSCs-IV than those of the other pSSC lines (P<0.05). Among three chondrogenic markers, collagen type II (Col II) and sex determining region Y-box (Sox9) mRNAs were strongly expressed in pSSCs-IV (P<0.05), but not in aggrecan (Agg), which was significantly higher in pSSCs-II (P<0.05). These results demonstrate that the spontaneous adipocyte generation during chondrogenic differentiation has a positive effect on the chondrogenesis of pSSCs. More research is needed on the correlation between adipocyte generation and cartilage formation.

• Journal of Energy Engineering
• /
• v.13 no.4
• /
• pp.296-300
• /
• 2004

Performance evaluation and economic estimation were conducted on the water to water GSHP (Ground Source Heat Pump) installed in existing building. Ground heat exchanger was a closed vertical loop type and sized to be 5 boreholes and 100m depth per borehole. Operation efficiency of the system shows that, COP increased from 3.0 to 4.2 with entering water temperature in heating operation, however, COP decreased from 5.0 to 3.7 in cooling operation. Economic estimation was analyzed by LCC (Life Cycle Cost) method and it showed that GSHP could save 68% of cost compare to the conventional oil source. Thus, despite of the large amount of initial cost, GSHP has a economic advantage to the other energy sources.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.180-185
• /
• 2014

Due to the larger and high-speed vessels recently constructed, output and speed of the engines for propulsion or power generation is increasing. These high-power and high-speed engine of the ship is becoming as a major contributor causing excessive noise and vibration. Other fittings as well as equipment installed on board, it makes equipment failure or other defect by resonance. This causes a lot of M/H(Man Hour) for repairs and the reliability of the company is invading even be negative because the clients give much comment. Thus, it's being studied for any fittings installed on board to maintain the safe operation and to prevent any problem during the performance in any operating conditions. In this study, it was investigated to solve these problems for the supports of the various fittings for easy installation-related support that each type of intensity and shape and manufacturing method using structural analysis program(DNV Nauticus Hull 3D Beam). Namely, it would be applied to the very large crude carriers in consideration of mechanics of materials of the support equipment by providing the fact that dynamics analysis of the structural characteristics of the equipment and the support of the production installation is easy and productivity can be high standards for geometry and thereby to simplify the analysis task to design changes at the same time and to minimize the reinforcement for the supports.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.841-851
• /
• 1996

In a recent investigation, the formation of bainite phase in direct-quenched low carbon non heat-treated steel was reported. In this study the effects of bainite phase on the mechanical properties of direct-quenched microalloying steels were investigated. By isothermal transformation at $480^{\circ}C$ for 7 sec., volume fraction of bainite lath was 15~20%, and the UTS and impact energy were increased. In this case $B_{ll}$ and $B_{lll}$ type bainite was observed and the fractography of impact test specimen showed a ductile fracture tendency. Isothermal transformation for 100sec., yielded 30% volume fraction of granular bainite and the mechanical properties were decreased. The f ractography of impact test specimen showed a brittle fracture tendency. The addition of Mo was more effective than B for improving impact energy because amounts of boron aditions were restricted to considerably lower levels, typically 10~ 30ppm. From this study, it is predicted that 15~20% volume fraction of lath bainite on the direct quenching process is procduced by addition of Mo up to 1.2wt. % and controlling the finish forging proc¬ess at $1000^{\circ}C$ and using oil as direct quenching media. This will improve mechanical properties of the direct- quenched steel.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.617-626
• /
• 2020

The drilling mud is essentially used in oil and gas development. There are several roles of using the drilling mud, such as cleaning the bottomhole, cooling and lubricating the drill bit and string, transporting the cuttings to the surface, keeping and adjusting the wellbore pressure, and preventing the collapse of the wellbore. The fragments from rocks and micro-sized bubbles generated by the high pressure are mixed in the drilling mud. The systems to separate those mixtures and to keep the uniformly maintained quality of drilling mud are required. In this study, the simulation is conducted to verify the performance of the mud tank's agitation capacity. The primary role of the mud tank is the mixing of mud at the surface with controlling the mud condition. The container type is chosen as a mud tank pursuing efficient transport and better management of equipment. The single- and two-phase simulations about the agitation in the mud tank are performed to analyze and identify the inner flow behavior. The convergence of results is obtained for the vertical- and axis-direction velocity vector fields based on the grid-dependency tests. The mixing time analysis depending on the multiphase flow conditions indicates that the utilization of a two-stepped impeller with a smaller size provides less time for mixing. This study's results are expected to be utilized as the preliminary data to develop the mixing and integrating equipment of the onshore drilling mud system.

• Journal of Korean Society for Quality Management
• /
• v.47 no.2
• /
• pp.345-365
• /
• 2019

Purpose: We consider export of Korea for Muslim population of Cairo residents in Egypt. Product instant cup noodle and yuzu tea are mainly focused on Kano model and Timko's customer satisfaction factor (CS - Coefficient) analysis and conjoint analysis. Methods: Based on the evaluation and conjoint analysis, cluster analysis was additionally applied to further exploratory research as to what kind of population the target customer has. A total of 120 people, each 60 people each, were prosecuted for Muslim women, middle middle class who had over 3,000 Korean won annual income for that study, and in Cairo in August 18. Results: The Kano analysis result Instant cup noodles act as attractive elements for packaging state, cooking method, smell and convenience, and Yuzu tea acted as an attractive element of taste, eating method, raw materials, efficacy, packaging form. Customer satisfaction factor, instant cup noodles, capacity and noodle thickness was a factor of indifference in Kano analysis, but acted as an attractive factor, the way to eat citron tea was classified as a factor of indifference. Conclusion: In the case of instant cup noodles, we first set up the taste of chicken-based soup with high appreciation as a whole, a group that likes chicken-based soup taste and oil noodles for each market segment, a taste of beef based soup And popular group that likes raw noodles Appears that diversification is necessary, and it has been found that it is necessary to develop a product type by hierarchy and marketing with different size priority from group packaging container. In the case of Yuzu tea, it is indispensable to emphasize the efficacy, in particular, energy recovery preference appears high, appealing point matching the needs of energy recovery is necessary, release the citrus fruit as a product without buckwheat in Bisson Ho, the packaging container, The group that likes cups and sticks is different and we found that it is necessary to prepare all two types.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.311-318
• /
• 2015

Emission characteristics from charbroiling of four different meats (beef, port, duck and chicken) in a pilot-scale cooking facility were investigated in this study. The analyzed air pollutants include gaseous species (CO, NO, $SO_2$, $NH_3$ and PAHs) as well as particulate matters (TSP, $PM_{10}$, $PM_{2.5}$ and black carbon). The emission factors of $PM_{10}$ and PAHs were in the range of 3~47 g-PM/kg-meat and 0.6~11.41 mg-PAHs/kg-meat, respectively, depending on the type of a meat. In addition, the results also revealed that the high ratio of $PM_{2.5}$ to TSP in a meat charbroiling should be considered to design and to operate air pollution control devices.

• Yonsei Medical Journal
• /
• v.59 no.9
• /
• pp.1064-1071
• /
• 2018

Purpose: To explore the influence of S100 calcium binding protein A4 (S100A4) knockout (KO) on methionine-choline-deficient (MCD) diet-induced non-alcoholic fatty liver disease (NAFLD) in mice. Materials and Methods: S100A4 KO mice (n=20) and their wild-type (WT) counterparts (n=20) were randomly divided into KO/MCD, Ko/methionine-choline-sufficient (MCS), WT/MCD, and WT/MCS groups. After 8 weeks of feeding, blood lipid and liver function-related indexes were measured. HE, Oil Red O, and Masson stainings were used to observe the changes of liver histopathology. Additionally, expressions of S100A4 and proinflammatory and profibrogenic cytokines were detected by qRT-PCR and Western blot, while hepatocyte apoptosis was revealed by TUNEL staining. Results: Serum levels of aminotransferase, aspartate aminotransferase, triglyceride, and total cholesterol in mice were increased after 8-week MCD feeding, and hepatocytes performed varying balloon-like changes with increased inflammatory cell infiltration and collagen fibers; however, these effects were improved in mice of KO/MCD group. Meanwhile, total NAFLD activity scores and fibrosis were lower compared to WT+MCD group. Compared to WT/MCS group, S100A4 expression in liver tissue of WT/MCD group was enhanced. The expression of proinflammatory ($TGF-{\alpha}$, $IL-1{\beta}$, IL-6) and profibrogenic cytokines ($TGF-{\beta}1$, COL1A1, ${\alpha}-SMA$) in MCD-induced NAFLD mice were increased, as well as apoptotic index (AI). For MCD group, the expressions of proinflammatory and profibrogenic cytokines and AI in KO mice were lower than those of WT mice. Conclusion: S100A4 was detected to be upregulated in NAFLD, while S100A4 KO alleviated liver fibrosis and inflammation, in addition to inhibiting hepatocyte apoptosis.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.673-682
• /
• 2020

The ground shear force at the expected failure surface and resistance force due to reinforced anchor can act as important factors according to a failure type from the stability viewpoint at a slope. Furthermore, the anchor's axial force may vary at an anchor-reinforced slope due to ground weathering, settlement, and corrosion in the incompletely anti-corrosion treated steel wire strand at a ground where the bearing plate is installed. However, in case that the resistance force of the anchor is locally lost due to the variation of the anchor's axial force, the resistance force may not play the role so that the external force tends to be transferred to the surrounding anchors, causing an increase in the tensile force in the surrounding anchors. Accordingly, a stability problem at the entire slope may occur, which requires much attention. Thus, this study proposed a method to monitor a variation trend of the tensile force of anchors installed at a slope and infer the external stability at the entire slope considering the monitoring result.