• Nuclear Engineering and Technology
• /
• 제40권6호
• /
• pp.467-476
• /
• 2008

To keep the superconducting (SC) magnet coils of KSTAR at proper operating conditions, not only the coils but also other cold components, such as thermal shields (TS), magnet structures, SC bus-lines (BL), and current leads (CL) must be maintained at their respective cryogenic temperatures. A helium refrigeration system (RRS) with an exergetic equivalent cooling power of 9 kW at 4.5 K without liquid nitrogen ($LN_2$) pre-cooling has been manufactured and installed. The main components of the KST AR helium refrigeration system (HRS) can be classified into the warm compression system (WCS) and the cryogenic devices according to the operating temperature levels. The process helium is compressed from 1 bar to 22 bar passing through the WCS and is supplied to cryogenic devices. The main components of cryogenic devices are consist of cold box (C/B) and distribution box (D/B). The C/B cool-down and make the various cryogenic helium for the KSTAR Tokamak and the various cryogenic helium is distributed by the D/B as per the KSTAR requirement. In this proceeding, we will present the commissioning results of the KSTAR HRS. Circuits which can simulate the thermal loads and pressure drops corresponding to the cooling channels of each cold component of KSTAR have been integrated into the helium distribution system of the HRS. Using those circuits, the performance and the capability of the HRS, to fulfill the mission of establishing the appropriate operating condition for the KSTAR SC magnet coils, have been successfully demonstrated.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.58.2-58.2
• /
• 2012

Heavy hydrocarbon reforming is a core technology for "Dirty energy smart". Heavy hydrocarbons are components of fossil fuels, biomass, coke oven gas and etc. Heavy hydrocarbon reforming converts the fuels into $H_2$-rich syngas. And then $H_2$-rich syngas is used for the production of electricity, synthetic fuels and petrochemicals. Energy can be used efficiently and obtained from various sources by using $H_2$-rich syngas from heavy hydrocarbon reforming. Especially, the key point of "Dirty energy smart" is using "dirty fuel" which is wasted in an inefficient way. New energy conversion laboratory of KAIST has been researched diesel reforming for solid oxide fuel cell (SOFC) as a part of "Dirty energy smart". Diesel is heavy hydrocarbon fuels which has higher carbon number than natural gas, kerosene and gasoline. Diesel reforming has difficulties due to the evaporation of fuels and coke formation. Nevertheless, diesel reforming technology is directly applied to "Dirty fuel" because diesel has the similar chemical properties with "Dirty fuel". On the other hand, SOFC has advantages on high efficiency and wasted heat recovery. Nippon oil Co. of Japan recently commercializes 700We class SOFC system using city gas. Considering the market situation, the development of diesel reformer has a great ripple effect. SOFC system can be applied to auxiliary power unit and distributed power generation. In addition, "Dirty energy smart" can be realized by applying diesel reforming technology to "Dirty fuel". As well as material developments, multidirectional approaches are required to reform heavy hydrocarbon fuels and use $H_2$-rich gas in SOFC. Gd doped ceria (CGO, $Ce_{1-x}Gd_xO_{2-y}$) has been researched for not only electrolyte materials but also catalysts supports. In addition, catalysts infiltrated electrode over porous $La_{0.8}Sr_{0.2}Ga_{0.8}Mg_{0.2}O_3-{\delta}$ and catalyst deposition at three phase boundary are being investigated to improve the performance of SOFC. On the other hand, nozzle for diesel atomization and post-reforming for light-hydrocarbons removal are examples of solving material problems in multidirectional approaches. Likewise, multidirectional approaches are necessary to realize "Dirty energy smart" like reforming "Dirty fuel" for SOFC.

• 한국식품영양과학회지
• /
• 제32권1호
• /
• pp.137-142
• /
• 2003

오미자 추출물을 감마선 조사하여 색택 개선, 항산화성, 항균성에 대하여 실험하였다. 오미자의 추출 방법은 열수추출, ethanol, methanol 그리고 acetone으로 추출하였으며, 감마선 조사는 10, 20 그리고 30 kGy로 하였다. 감마선 조사 선량이 증가할수록 명도(Hunter color L-value)의 경우 비조사구보다 조사구가 월등히 밝은 색을 보였으며, 적색도(a값)와 황색도(b값)는 감소하는 결과를 보여줬다. TBA가 분석 결과는 ethanol로 추출한 경우 가장 높은 항산화력을 확인하였다. 전자 공여능의 측정 결과는 열수 추출한 경우에 비조사구와 조사구 모두 가장 활성이 높았으며 ethanol과 methanol의 경우에는 비조사구와 비슷한 활성을 보여줬다. 오미자 추출 용매별 및 감마선 조사 선량에 따른 항균효과는 B. subtilis, B. natto, B. megaterium, S. aureus, Sal, typhymurium과 E. coli 등 모든 균주에 대해 아주 높은 항균 활성을 나타내었다. 또한 오미자 추출물은 30 kGy까지 감마선을 조사하여도 추출물의 생리 활성에는 영향을 미치지 않았다 따라서 감마선 조사 기술은 천연 식품 보존제 및 화장품 원료로서 사용하기 위한 오미자 추출물의 색택 개선에 활용 가능성이 높을 것으로 기대된다.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.925-933
• /
• 2011

The traditional feedstock for dimethyl ether (DME) has been natural gas obtained by pipeline from a nearby natural gas or oil field. This report focuses on other feedstock: Coal bed methane (CBM). The resource availability and suitability of CBM for DME manufacturing have been investigated. CBM in a short time has become an important industry, providing an abundant clean-burning fuel and also suggesting as a feedstock for gas industry. The use of CBM will have very little impact on the KOGAS' DME process design and economics up to 50 vol% of $CO_2$ in the CBM source. Many of the CBM sources in Asia are high in $CO_2$, but pose no difficulties for the KOGAS' DME plant. Since tri-reformer requires substantial $CO_2$ in its feed, no $CO_2$ removal from the CBM feed is needed. The $CO_2$ in the CBM means that less $CO_2$ needs to be recycled from the downstream in the process.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.396-399
• /
• 2007

폐 EPS 열분해반응으로부터 원료인 스티렌모노머를 회수하는 반응과정에서 오일의 생성과 스티렌모노머, 에틸벤젠, 알파메틸스티렌 및 dimer와 같은 오일의 조성은 반응 잔류물에 큰 영향을 받으므로 새로운 반응기의 개발을 위한 연구를 수행하였다. 본 연구에서는 회분식반응기와 달리 주입되는 원료가 벽을 통해 흐르면서 반응하고 생성되는 잔류물은 연속적으로 외부로 배출됨에 따라 생성오일의 조성에 영향을 주지 않도록 고안한 새로운 형태의 wetted-wall 형 반응기를 제안하였다. Wetted-wall 형 반응기를 이용하여 반응온도, 원료주입속도를 비롯하여 반응기 내부의 증발가스를 배출시키기 위해 주입되는 질소 유량 등의 변수들을 고찰하였다. 또한 반응으로부터 선정된 최적조건으로부터 연속운전을 수행하여 스티렌모노머의 수율은 65% 이상의 일정한 수준으로 유지되는 결과를 얻었다.

• Journal of Microbiology and Biotechnology
• /
• 제17권5호
• /
• pp.784-791
• /
• 2007

The present work aims to use a biofilter technology(aerated submerged filters) for the aerobic transformation at laboratory-scale of olive washing water(OWW) generated in the first steps of olive oil processing, as well as the genetic profiling and identification to the species level of the bacteria involved in the formation of the biofilm, by means of TGGE. Chemical parameters, such as biological oxygen demand at five days($BOD_5$) and chemical oxygen demand(COD), decreased markedly(up to 90 and 85%, respectively) by the biological treatment, and the efficiency of the process was significantly affected by aeration and inlet flow rates. The total polyphenol content of inlet OWW was only moderately reduced(around 50% decrease of the inlet content) after the biofilter treatment, under the conditions tested. Partial 16S rRNA genes were amplified using total DNA extracted from the biofilm and separated by TGGE. Sequences of isolated bands were mostly affiliated to the $\alpha-subclass$ of Proteobacteria, and often branched in the periphery of bacteria] genera commonly present in soil(Rhizobium, Reichenowia, Agrobacterium, and Sphingomonas). The data obtained by the experimentation at laboratory scale provided results that support the suitability of the submerged filter technology for the treatment of olive washing waters with the purpose of its reutilization.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.1016-1022
• /
• 2010

액상 중유 연료를 사용하는 고용량 증기 보일러에서 발생되어 연소기기 내부에 침적되는 슈트, 슬래그, 크랭커, 회분, 산화물의 on-line 세정을 위한 세정제 제조에 대한 연구를 수행하였다. 액상 중유 연료를 사용하는 보일러 및 가열로에 생성되는 슈트, 슬래그, 크랭커, 회분, 산화물을 제거하는 기존 기술은 보일러 및 가열로의 가동 중단 후 작업자들에 의한 기계적인 처리를 통하여 침적물을 제거하는 기술을 사용하고 있다. 기존 기술을 대치할 수 있고 보일러의 중단이 없는 상태에서 침적물을 세정할 수 있는 세정제의 최적 조성을 도출하였다. 질산암모늄과 질산마그네슘의 혼합물이 주 세정제로 도출되었으며, 각종 전이금속 화합물에 의한 영향을 영향을 연구하여, 세정에 의한 부식을 방지할 수 있으며, 연소효율의 증대를 얻을 수 있는 전이금속화합불 첨가제를 도출하였다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.379-390
• /
• 1998

In endodontic treatment, calcium hydroxide has been used as intracanal medicament. Although calcium hydroxide should be removed thoroughly before permanent root canal filling, no effective method for its removal has been reported. Because of irregularity of root canal walls, root curvatures and anatomic variations, it is insufficient to remove calcium hydroxide from the canal wall only by mechanical instrumentation Considering the chemical effects of irrigants on calcium hydroxide, $Ca^{++}$ dissolving effect from two calcium hydroxide products is investigated, using dis- tilled water, NaOCl, citric acid and EDTA. Vitapex$^{(R)}$ 0.1g and calcium hydroxide 0.03g were dissolved in distilled water, 5% NaOCl, 50% citric acid and 17% EDTA respectively, at 1, 3, 5, 10min. time interval. The solution was filtered using filter paper(pore size $5{\mu}m$) and $Ca^{++}$ concentration was determined by ion chromatography. The result were as follows : 1. Distilled water, NaOCl, citric acid and EDTA abstracted more $Ca^{++}$ from calcium hydroxide than Vitapex$^{(R)}$ except NaOCl 1, 5, 10 time interval. 2. EDTA and citric acid abstracted more $Ca^{++}$ from Vitapex$^{(R)}$ and calcium hydroxide than distilled water or NaOCl. The overall result support the view that water-based calcium hydroxide product is easily removed than oil-based calcium hydroxide product and EDTA, citric acid are more effective in $Ca^{++}$ elution than NaOCl or distilled water.

• 상하수도학회지
• /
• 제32권6호
• /
• pp.479-485
• /
• 2018

Large amounts of oily wastewater discharged from various industrial operations (petroleum refining, machinery industries and chemical industries) cause serious pollution in the aquatic environment. Although dissolved air flotation (DAF) separating oil pollutants using microbubbles represents current practice, bubble size cannot be selectively controlled, and lots of power is required to generate microbubbles. Therefore, to investigate performance of the DAF process, this study examined the distribution of different sizes of microbubbles resulting from changes in physical shear force via modifying shapes of a slit-nozzle without an additional power supply. Three types of slit-nozzles (different angle, shape and length of the slit-nozzle) were used to analyze the distribution of bubble size. At a slit angle of $60^{\circ}$, shear force was 4.29 times higher than a conventional slit, and particle size distribution (PSD) in the range between 2 and $20{\mu}m$ more than doubled. Treatment efficiency of synthetic oily wastewater through the coagulation-DAF process achieved 90% removal of COD by injecting $FeCl_3$ and PACl of 250 mg/L and 100 mg/L, respectively, and the same performance resulted using $FeCl_3$ of 200 mg/L and PACl of 80 mg/L employing a slit-nozzle angle of $60^{\circ}$. This study shows that a coagulation-DAF process using a modified slit-nozzle can improve the pre-treatment of oily wastewater.

• Journal of Plant Biotechnology
• /
• 제45권4호
• /
• pp.328-332
• /
• 2018

Soybean [Glycine max (L.) Merr.] seed is an important dietary source of protein, oil, carbohydrate, isoflavone and other various nutrients for humans and animals. However, there are anti-nutritional factors in the raw mature soybeans. Kunitz trypsin inhibitor (KTI) protein and stachyose are the main anti-nutritional factors in soybean seed. The ${\alpha}^{\prime}$-subunit of ${\beta}$-conglycinin protein exhibit poor nutritional and food processing properties. The genetic removal of the KTI and ${\alpha}^{\prime}$-subunit proteins will improve the nutritional value of the soybean seed. The objective of this research was to develop a new soybean strain with KTI and ${\alpha}^{\prime}$-subunit protein free ($titicgy_1cgy_1$ genotype) and proper agronomic traits. A breeding population was developed from the cross of the Bl-1 and 15G1 parents. A total of 168 $F_2$ seeds from the cross of the BL-1 and 15G1 parents were obtained. The segregation ratios of 9: 3: 3: 1 ($104Ti\_Cgy_{1\_}:\;30Ti\_cgy_1cgy_1:\;21cgy_1cgy_1Ti\_:\;13titicgy_1cgy_1$) between the Ti and $Cgy_1$ genes in the $F_2$ seeds were observed (${\chi}^2=5.12$, P=0.5-0.10). Two $F_4$ plant strains with proper agronomical traits and $titicgy_1cgy_1$ genotype (free of both KTI and ${\alpha}^{\prime}$-subunit protein) were selected and harvested. 2 strains (S1 and S2) had yellow seed coats and hilum. The plant height of the S1 strain was 65 centimeters. The 100-seed weight was 29.2 g. The plant height of the S2 strain was 66 centimeters and 100-seed weight was 26.2 g. The two strains selected in this research will be used to improve the new cultivar that will be free of the KTI and ${\alpha}^{\prime}$-subunit proteins.