• Journal of Life Science
• /
• v.13 no.1
• /
• pp.47-53
• /
• 2003

The purpose of this study is to improve the system for biological nitrogen oxidizing process in sewage and wastewater. A bacterium having high abilities to oxidize of nitrogen was one of the possessed on Lab. The strain was identified to Bacillus sp. A8-8, based on the physiological and biochemical properties. And the strain has ability degradation crude oil. In comparison with oxidizing rates with changing initial pH and temperature, the strain Bacillus sp. A8-8 was nitrogen oxidizing ability and growth rate on the various of pH, temperature. oxidizing rates of the strain in sewage and wastewater were about 48% and 62%, respectively. The nitrogen oxidizing rate was increased in proportion to the initial concentration of glucose. The microorganism, Bacillus sp. A8-8, immobilized in ceramic carrier were evaluated for the oxidation of ammonia in culture media.

• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.345-350
• /
• 2002

This study was carried out to determine the effect of gamma irradiated Puerariae radix extract on color removal, antioxidative, DPPH radical scavenging and antimicrobial efftcts. Puerariae radix were extracted with methanol and acetone and irrdiated 10, 20 and 30 kGy with gamma ray. Hunter color L-value increased by irrdiation in a dose dependent manner, resulting in brighter color. But a and b values decreased by irradiation in a dose dependent manner. Antioxidant activities of the Puerariae radix extract in soybean oil emulsion were higher in methanol extract than acetone extract. Scavenging effect of Puerariae radix extracts on DPPH radical with methanol was not changed by irradiation but acetone decreased Acetone extract from Puerariae radix showed antimicrobial activities in B. subtilis, B, natto, B, megaterium S, aureus, Sal, typhymurium and E. coli methanol extract also had the antimicrobial activities but weaker for Sal. typhymurium and E. coli. Results suggested that Puerariae radix extracts have a potential as a natural food preservatives and cosmetic raw material.

• Journal of Korea Soil Environment Society
• /
• v.5 no.1
• /
• pp.85-96
• /
• 2000

The purpose of this study was to Investigate the effect of environmental conditions on the degradation of total petroleum hydrocarbons(TPH) in soil. The soil used for this study was sandy loam. Target contaminant, diesel oil, was spiked at 10.000mgTPH/kg dry soil. Moisture content was controlled to 50%, 70%, and 90% of field capacity of the soil. Temperature was controlled to $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, and $30^{\circ}C$. The active degradation of TPH was observed at the moisture contents of 50% and 70% of field capacity, and temperature of $10^{\circ}C$ to $30^{\circ}C$. Degradation rate of n-alkanes was about two times greater than that of TPH. Volatilization loss of TPH was about 2% of initial concentration. Biocide control and no aeration experiments indicated that removal of TPH was primarily occurred by biodegradation under aerobic condition.

• Membrane and Water Treatment
• /
• v.11 no.2
• /
• pp.97-109
• /
• 2020

Membrane fouling is the main drawback of membrane technology. Frequent membrane cleaning and membrane replacement are, therefore, required to reduce membrane fouling that causes permeate flux reduction, lower rejection, or higher operating pressure. Studies have proved that the alteration of membrane properties is the key controlling factor in lessening membrane fouling. Among stimuli-responsive membranes, thermo-responsive membrane is the most popular, with a drastic phase transition and swelling-shrinking behavior caused by the temperature change. In this study, the thermo-responsive ability of two commercial membranes, PolyCera® Titan membrane and PolyCera® Hydro membrane, at different temperatures was studied on the antifouling function of the membrane in palm oil mill effluent (POME) treatment. The evaluation of the membrane's thermo-responsive ability was done through three cycles of adsorption (fouling) and desorption (defouling) processes in a membrane filtration process. The experimental result depicted that PolyCera® Hydro membrane had a higher membrane permeability of 67.869 L/㎡.h.bar than PolyCera® Titan membrane at 46.011 L/㎡.h.bar. However, the high membrane permeability of PolyCera® Hydro membrane was compensated with low removal efficiency. PolyCera® Titan membrane with a smaller mean pore size had better rejection performance than PolyCera® Hydro membrane for all tested parameters. On the other hand, PolyCera® Titan membrane had a better hydrodynamic cleaning efficiency than PolyCera® Hydro membrane regardless of the hydrodynamic cleaning temperature. The best hydrodynamic cleaning performed by PolyCera® Titan membrane was at 35℃ with the flux recovery ratio (FRR) of 99.17 ± 1.43%. The excellent thermo-responsive properties of the PolyCera® Titan membrane could eventually reduce the frequency of membrane replacement and lessen the use of chemicals for membrane cleaning. This outstanding exploration helps to provide a solution to the chemical industry and membrane technology bottleneck, which is the membrane fouling, thus reducing the operating cost incurred by the membrane fouling.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.14-20
• /
• 1995

Discourses on global environment are not only limited to the matter of simple environmen-tal protection but also going to an imperative that every country should take the environ-mental aspects into more consideration, and if necessary even proceed to modify its own strategies for economic growth. It is because scores of existing International conventions and agreements on environmental caused tend to combine the environmental issues with trade sanctions and financial assistances in order to ensure a mandatory power in pushing themselves through on a global dimension. Particularly noteworthy is the so -called Green Round(GR) which substantially associates the Issues of environmental protection with some sanctions in international trade, its rationale is quite simple. The differentiated production costs rising from the difference in environmental standards among different countries may affect national competitiveness in in-ternational trade, therefore a need does exist to countervail this difference. In reality, however, severe dissention seems to have been exposed between the developed and developing countries around this matter, because national interests and priorities in national goals considerably differ among respective countries. Greenhouse gases such as carbon dioxide which caused global warming are mostly released from the combustion of fossil fuels. The perfect removal of released $CO_{2}$ is impossible with existing technologies, and moreover, it's not payable in economical terms. Therefore it will be more effective and desirable to make more efforts to prevent the release of the $CO_{2}$ it- self through energy conservation involving the development and promotion of clean and high-efficient energy technologies and energy sources, and the development and promotion of new & renewable energy resources, and so on. One of important national tasks In our country is to establish an Energy Policy consider-ing environmental impacts since Korea depends most of its energy consumption on the fossil fuels such as oil and coal.

• KSBB Journal
• /
• v.21 no.6 s.101
• /
• pp.418-421
• /
• 2006

Fatty acid methyl esters, also referred to as biodiesel, have been determined to have a great deal of potential as substitutes for petro-diesel. In order to enhance productivity in the biodiesel production process, feedstocks were previously recommended to be anhydrous, with a free fatty acid content of less than 0.5%. In this study, the effects of several catalysts, methanol molar ratio, catalyst amount, and reaction time on the reduction of free fatty acid level were studied with a simulated feedstock consisting of 20% oleic acid in rapeseed oil. Ferric sulfate was selected as the best catalyst. Increasing the catalyst amount and methanol molar ratio is very effective in decreasing the acid value of the simulated mixture. Our results may provide useful information with regard to the development of more economic and efficient free fatty acid removal system.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.733-736
• /
• 2000

Lignin is usable as fuels and heavy oil additives if depolymerized to monomer unit, because the chemical structures are similar to high octane materials found in gasoline. In this study, the solvent-phase thermal cracking(solvolysis) of lignin was performed at the various temperature and time in a laboratory tubular reactor. Conversion yield was measured for the properties of thermal cracking and liquefaction reaction of lignin. Highest conversion yield when acetone was used as thermal cracking solvent was 55.5% at $350^{\circ}C$, 50minutes and highest tar generation were $260{\sim}350mg/g\;{\cdot}\;lignin$ at $250^{\circ}C$, and highest conversion yield after tar removal was 76.88% at $300^{\circ}C$, 30minutes. Conversion yield, product compositions and amounts were determined by tar degradation yield.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.535-539
• /
• 2008

Conversion to oil, yield of styrene and formation of side products such as ${\alpha}-methyl$ styrene, ethyl benzene, benzene, toluene, dimer and trimer were affected by residue formed during thermal degradation. Also, control of reaction temperature had a difficulty at the first stage. Thus, new reaction system using wetted-wall type reactor was proposed and examined on various parameters such as reaction temperature, feeding rate and removal velocity of formed vapor. Optimun condition was obtained from continuous thermal degradation using wetted-wall type reactor and reaction kinetic study was carried out at new type reactor.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.4
• /
• pp.245-250
• /
• 2010

Porous poly(lactic-co-glycolic acid) microspheres (PLGA MS) have been utilized as an inhalation delivery system and a matrix scaffold system for tissue engineering. Here, gelatin (type A) is introduced as an extractable pH-responsive porogen, which is capable of controlling the porosity and pore size of PLGA microspheres. Porous PLGA microspheres were prepared by a water-in-oil-in-water ($w_1/o/w_2$) double emulsification/solvent evaporation method. The surface morphology of these microspheres was examined by varying pH (2.0~11.0) of water phases, using scanning electron microscopy (SEM). Also, their porosity and pore size were monitored by altering acidification time (1~5 h) using a phosphoric acid solution. Results showed that the pore-forming capability of gelatin was optimized at pH 5.0, and that the surface pore-formation was not significantly observed at pHs of < 4.0 or > 8.0. This was attributable to the balance between gel-formation by electrostatic repulsion and dissolution of gelatin. The appropriate time-selection between PLGA hardening and gelatin-washing out was considered as a second significant factor to control the porosity. Delaying the acidification time to ~5 h after emulsification was clearly effective to make pores in the microspheres. This finding suggests that the porosity and pore size of porous microspheres using gelatin can be significantly controlled depending on water phase pH and gelatin-removal time. The results obtained in this study would provide valuable pharmaceutical information to prepare porous PLGA MS, which is required to control the porosity.

• Korean Journal of Microbiology
• /
• v.35 no.1
• /
• pp.53-60
• /
• 1999

The biodegradation of recalcitrant polycyclic aromatic hydrocarbon, pyrene was investigated in microcosm simulating the beach sand and seawater. The natural biodegradation rates of pyrene were between 30-2,200 ng/g(ml)/day in beach sand and seawater when the pyrenc loading rates were 100- 1,000 ppm at 5-$20^{\circ}C$. The effects of the inoculum size, pyrene concentralion, incubation temperature and surfactant addition were investigated in fertilized (Inipol EAP 22) samples. Generally the biodegradation in beach sand was higher than that in seawater. A mixed inoculum (Pseudomonus, Acinetobacter, Moruxella) showed the 3,120 nglglday of biodegradation rate in beach sand with 200 ppm pyrene, which was 7.8 times higher than the natural biodegradation rate. The highest transformation rate, 4,860 ng/g/day was obtained in the bioaugmented beach sand (1,000 ppm pyrene). The glucose and surfactant addition to enhance the removal have negatively influenced on the biodegradation of pyrene. In case ol surfactants, CMC (critical micell concentration) might bc the control factor for the biodegradation.