• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.723-732
• /
• 2020

The spent RHDS (Residue HydroDeSulfurization) catalyst is deactivated mainly by deposition of various contaminants such as coke, sulfur and vanadium on the surface of catalyst. To eliminate those contaminants, the following remanufacturing process was conducted. The first, heavy oil on the surface of the spent RHDS catalyst was removed by kerosene and dehydrated. The second, the high temperature incineration was carried out to eliminate coke and sulfur components deposited on the surface of spent RHDS catalyst. The third, the excessive quantity of Vanadium deposited on the surface of catalyst was removed by leaching process as follows: ultrasonic agitation was carried out at 50℃, for 10 seconds with 0.5% and 1% oxalic acid solution. The purpose of this process is to find out regenerated RHDS catalyst can be used as SCR catalyst for NOx reduction by controlling the vanadium residual content of the regenerated RHDS catalyst through leaching process. The composition of regenerated RHDS catalyst was analyzed by XRF and the NOx reduction efficiency was also measured by continuous catalytic fixed bed reactor. As the result, regenerated catalyst, with 0.5% oxalic acid, ultrasonic agitation in 10 seconds, showed the most stable NOx reduction efficiency. Also, in comparison with commercial SCR catalyst, the NOx reduction performance of regenerated catalyst was similar to that of commercial SCR catalyst at the temperature 375℃ and higher whereas was lower than commercial SCR catalyst at the temperature range between 200~250℃. Therefore, it was confirmed that the regenerated catalyst as powder form wash coated on the surface of metal corrugated substrate can be used for commercial SCR catalyst.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.3
• /
• pp.471-498
• /
• 2009

The ability to judge a country's scientific standing is vital for the governments and businesses that must decide scientific priorities and funding. In this paper, we analyze the output and outcomes from research investment over the recent years, to measure the quality of scientific research on national scales and to set it in an international context. There are many ways to evaluate the quality of scientific research, but few have proved satisfactory. To measure the quantity and quality of science in different nations, we analyzed the numbers of published research papers and their citations. The number of citations per paper is a useful measure of the impact of a nation's research output. Essential at a were acquired from SCI database by Thomson Scientific, which indexes more than 8,000 journals, representing most significant materials in science and engineering. The purpose of this paper is to evaluate and compare the output and outcomes among nations in a variety of viewpoints and criteria. One of the implications in response to the result of analysis is that sustainable economic development in highly competitive world markets requires a direct engagement in the generation of knowledge. Even modest improvement in healthcare, clean water, sanitation, food, and transport need capabilities in engineering, technology, and medicine beyond many countries' reach. Nations exporting natural resources such as gold and oil can import technology and expertise, but only until these resources are exhausted. For them, sustainability should imply investment in alternative agricultural and technological capabilities through improvements in their skills base. A strong science base does not necessarily leat to wealth generation. However, strength in science has additional benefits for individual nations, and for the world as a whole.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.4
• /
• pp.522-527
• /
• 2002

The experiment was conducted for a period of 56 days with twelve Bangladeshi bull calves of average body weight of $127.20{\pm}11.34$ kg. The calves were divided into 3 groups having 4 animals in each. The animals were fed urea-treated rice straw designated as A) 4% urea-treated rice straw, B) 4% urea+4% soybean-treated rice straw and C) 4% urea+6% soybean-treated rice straw. In addition, all the animals were supplied 2 kg green grass, 350 g Til-oil-cake and 100 g common salt per 100 kg body weight of animals. Straw was treated with 4% urea solution and soybean meal at 4 and 6% were added to treated straw and kept for 48 h in double layer polythene bags under anaerobic condition. Urea treatment improved crude protein (CP) content of rice straw from 2.68 to 8.70% and it was further increased by 10.74 and 12.12% with the addition of 4 and 6% soybean meal. Dry matter (DM) intake (kg) was higher (p<0.05) in C (4.2) followed by B (4.1) and A (4.0). Crude protein intake was significantly higher (p<0.05) in group B and C than group A. Total live weight gains were 20.2, 24.8 and 25.6 kg for calves of group A, B and C respectively (p<0.01). The addition of soybean meal to treated rice straw did not affect the coefficients of digestibility of DM, OM, EE and NFE. However, CP and CF digestibility were significantly higher in group B and C (p<0.05). The values for digestible crude protein (DCP), digestible ether extract (DEE), digestible nitrogen free extract (DNFE) and total digestible nutrients (TDN) were significantly (p<0.05) higher in diet C and B in comparison to diet A, but there were no significant difference in digestible organic matter (DOM) and digestible crude fibre (DCF) value among the groups. It may be concluded that 4% urea treated rice straw can be fed to growing bull calves with 2 kg green grass and a small quantity of concentrate without any adverse effect on feed intake and growth. Moreover, soybean meal at 4 and 6% can be added to urea treated rice straw at the time of treatment for rapid hydrolyzing of urea, which resulted an improvement in nutrient digestibility and better utilization of rice straw for growth of growing bull calves.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.59-69
• /
• 2013

This study presents development of the ANN simulator for well placement of infill drilling in gas fields. The input data of the ANN simulator includes the production time, well location, all inter well distances, boundary inter well distance, infill well position, productivity potential, functional links, reservoir pressure. The output data includes the bottomhole pressure in addition to the production rate. Thus, it is possible to calculate the productivity and bottomhole pressure during production period simultaneously, and it is expected that this model could replace conventional simulators. Training for the 20 well placement scenarios was conducted. As a result, it was found that accuracy of ANN simulator was high as the coefficient of correlation for production rate was 0.99 and the bottomhole pressure 0.98 respectively. From the resultes, the validity of the ANN simulator has been verified. The term, which could produce Maximum Daily Quantity (MDQ) at the gas field and the productivity according to the well location was analyzed. As a result, the MDQ could be maintained for a short time in scenario C-1, which has the three infill wells nearby aquifer boundary, and a long time in scenario A-1. In conclusion, it was found that scenario A maintained the MDQ up to 21% more than those of scenarios B and C which include parameters that might affect the productivity. Thus, the production rate can be maximized by selecting the location of production wells in comprehensive consideration of parameters that may affect the productivity. Also, because the developed ANN simulator could calculate both production rate and bottomhole pressure, respectively, it could be used as the forward simulator in a various inverse model.

• Korean journal of food and cookery science
• /
• v.28 no.6
• /
• pp.805-811
• /
• 2012

This study was carried out in order to optimize the manufacturing condition of fried garlic flakes as well as to investigate the physicochemical properties of the flakes. Fried garlic flake samples were prepared as follows: garlic was sliced by a thickness of 1.5 mm, 2.0 mm, 2.5 mm, which were measured by a thickness gage. The samples were fried in vegetable oil under different temperatures of $140{\sim}150^{\circ}C$, $160{\sim}170^{\circ}C$ and $180{\sim}185^{\circ}C$. The compression strength depending on the height (h) was measured in order to find the thickness effect by the rheometer (force control: 50 N, h: 3.25 mm). Moreover, the sample with 1.5 mm thickness showed crisp phenomena of the split compared with the crush shape of the 2.0 mm and 2.5 mm thick samples. The result of strength for time dependence showed a sample with a thickness of 1.5 mm, which was measured 5~9 times more than the 2.0 mm and 2.5 mm thick samples. We thought the reason that the 1.5 mm sample had less response power equivalent to compression force than the other samples. Alliin has been found to affect the immune responses in the blood, it is a derivative of the amino acid cysteine and is also quite heat stable. The LC system with a UV detection at 210 nm consists of a separation on a Zorbax TMS column and isocratic elution with water and ACN as a mobile phase. The alliin contents of raw and fried garlic flake under $140{\sim}150^{\circ}C$, $160{\sim}170^{\circ}C$ and $180{\sim}185^{\circ}C$ were 18.10 mg/mL, 14.0 mg/mL, 11.6 mg/mL and 11.1 mg/mL, respectively. The decrement of alliin content under different temperature was a small quantity hence, we confirmed that the increasing manufacturing temperature was not affected by the alliin content. Examining for the particle structure of fried garlic flakes by a polarization microscope, the color of the sample treated at $160{\sim}170^{\circ}C$ was pure yellow. Furder, the fiber shaped particle, which has an effect on the tough texture, almost did not appear compared to the different temperature conditions. Finally, the sensory test for the preference of fried garlic flake under different conditions was carried out and the scores for various sensory characteristics were surveyed. According to the physicochemical measurements and sensory evaluation, we confirmed that the optimum manufacturing condition of fried garlic flake was 1.5 mm thick at a temperature of $160{\sim}170^{\circ}C$.

• Korean Journal of Social Welfare
• /
• v.53
• /
• pp.155-178
• /
• 2003

Traditionally, the Sozialdemokratitische Partei Deutschlands(SPD) guards strictly radical welfare conception and intends to support the disabled with universal welfare-political instruments. After the oil-shock in 1973, European welfare states including Germany had experienced stark financial crisis because of economic unstability and increasing social expenditure. The political direction of SPD has been gradually changed. This transformation has been reflected automatically on the welfare policy for the disabled. In Germany, Gerhard Schroeder who leads the SPD governs since 1998. The Schroeder's new conception of welfare policy is known as the Third Way("neue Mitte") that the social economic structure intends to neo-liberalistic trend. The concern on the employment policy for the disabled has grown recently in neo-liberalistic age, but research on German employment policy for the disabled is very limited in quantity and depth. The main purpose of this study is to examine how the employment policy for the disabled of Schroeder-government has been developing in Germany. And this paper evaluates the effect of transforming policy. Based on this evaluation, this paper attempts to manifest the problem of Korean employment policy for the disabled and to find the implications of German model.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.4
• /
• pp.296-306
• /
• 2014

This study was conducted to survey and analyze the quantity of various organic wastes and to vitalize the utilization of agri-food by-products as raw materials for Total mixed ration (TMR), to improve feed cost savings and the quality of animal products. On-the-spot obstacles for animal farmers, along with legal and institutional alternatives are presented. The results are as follows. First, organic wastes in Korea are managed by the Allbaro system created in the Wastes Control Act, which processes 10,488 tons of cooking oil waste, 832,493 tons of animal and plant residues, 5,740 tons of animal carcasses, 1,171,892 tons of animal residues, and 2,172,415 tons of plant residues including 12,905 tons of rice hull and bran, for a total of 4,205,931 tons. Raw materials for TMR, namely rice hulls and bran as well as plant residues, accounted for 51.7% of the total national organic waste. The top 10 municipalities process 76~100% of all organic wastes and a supply management system is needed for the waste. Second, the 10 major agri-food by-products used as raw materials for TMR are bean curd by-product, rice bran, oil-cake, brewers dried grain, Distiller's Dried Grains with Solubles (DDGS), barley bran, soy sauce by-product, citrus fruit by-product, mushroom by-product and other food by-product (bread, noodles, snacks, etc.). Third, the biggest difficulties in using agri-food by-products are legal obstacles. Because agri-food by-products are regulated as industrial wastes by the Waste Control Act, animal farmers that wish to use them have legal reporting obligations including the installation of recycling facilities. To enable the use of agri-food by-products as raw materials for TMR, waste management system improvements such as 'the end of waste status' and the establishment of more than 10 public distribution centers nationwide are deemed essential.

• Applied Biological Chemistry
• /
• v.28 no.4
• /
• pp.245-251
• /
• 1985

In order to analyze the lipid composition ana chemical characteristics of rapeseed oil in relation to content of erucic acid, three recommendable cultivars(MOK-PO 70, MOK-PO DANGYO 12 and 14) seeds were used. The composition of lipid was confirmed by column chromatography and TLC, and the composition of fatty acid in total and neutral lipid was determined by GLC, and the results were as follows. 1. The crude fat was 44.0% to 45.3% in all cultivars. 2. The iodine value, saponification value, acid value and nonsaponifiable content were 100 to 101, 176 to 184, 0.7 to 0.9 and 1.0 to 1.2, respectively, with no remarkable difference among three cultivars. 3. The content of neutral lipid was 95.3% to 96.3% of total lipid, and others were compound lipids. 4. The content to triglyceride was 92. 1% to 92.5% of total lipid. Diglyceride and sterol ester were contained 1.1% and 1.2%, respectively. There was a small quantity of free fatty acid and free sterol and monoglyceride was little. 5. The erucic acid was the highest (26.4%), in MOK-PO DANGYO 12 among the composition of fatty acid, while those of MOK-PO 70 and MOK-PO DANGYO 14 were so small as 1.0% and 3.9%. The content of erucic acid was decreased with the increase of oleic acid, the content of oleic acid in MOK-PO DANGYO 12 was 30%, 63% in MOK-PO 70 and, 60% in MOK-PO DANGYO 14. The content of linoleic acid and linolenic acid showed no remarkable difference but that of eicosenoic acid was 11.7% in MOK-PO DANGYO 12 as the highest. The ratio of the fatty acid content in eluted neutral lipid and the total oil showed no remarkable differences.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.

• Journal of Aquaculture
• /
• v.9 no.2
• /
• pp.159-166
• /
• 1996

A feeding experiment was conducted using juvenile Korean rockfish (Sebastes schlegeli) to evaluate supplemental vitamin premix in a test diet containing fish meal as protein source for nutritional study. Four vitamin premixes were prepared by adjusting different quantity and combination of vitamins. Each vitamin premix contained (mg/kg diet) : premix-1 : ascorbic acid, 2666 ; a-tocopheryl acetate, 417 ; thiamin, 60 ; riboflavin, 200 ; pyridoxine, 40 ; niacin, 800 ; Ca-D-pantothenate, 280 ; myo-inositol, 4000 ; D-biotin, 6 ; folic acid, 15 ; p-amino-benjoic acid, 400 ; mennadione, 40 ; A, 16 ; $D_3$, 0.1 ; choline chloride, 8000 ; cyanocobalamin, 0.09 ; premix-2 : ascorbic acid, 270 ; a-tocopheryl acetate, 189 ; thiamin, 13.5 ; riboflavin,, 27 ; pyridoxine, 13.5 ; niacin, 135 ; Ca-D-pantothenate, 135 ; myo-inositol, 135 ; D-biotin, 1. 4 : folic acid, 4.9 ; mennadione, 5.4 : A, 5.4 ; $D_3$, 2.2 ; choline chloride, 3000 ; cyanocobalamin, 0.05 ; premix-3 : ascorbic acid, 570 ; a-tocopheryl acetate, 107 ; thiamin, 20 ; riboflavin, 14.3 ; pyridoxine, 14.3 ; niacin, 71,3 ; Ca-D-pantothenate, 57 ; myo-inositol, 456 ; D-biotin, 0.7 ; folic acid, 2.9 ; p-aminobenjoic acid, 285 ; mennadione, 5.7 ; A, 5.7 ; $D_3$, 1.1 ; choline chloride, 1500 ; cyanocobalamin, 0.03 ; premix-4 : ascorbic acid, 190 : a-tocopheryl acetate, 36 ; thiamin, 6.7 ; riboflavin, 4.8 ; pyridoxine, 4.8 ; niacin, 23.8 ; Ca-D-pantothenate, 19 ; myo-inositol, 152 ; D-biotin,0.2 ; folic acid, 1 ; p-aminobenjoic acid, 95 ; mennadione, 1.9 ; A, 1.9 ; $D_3$, 0.4 ; choline chloride, 500 ; cyanocobalamin, 0.01. Triplicate groups of the 50 fish averaging 4.25 g were fed one of four isoproteic ($47\%$) and isolipidic ($9\%$) experimental diets to satiation twice a day for 10 weeks. Weight gain, feed efficiency and protein retention in fish fed the diet with vitamin premix-1 were significantly higher than those in fish fed the other diets (P<0.05). Moisture, protein and lipid contents of muscle and whole body were not affected by different dietary vitamin premix (P>0,05). These results indicate that premix-1 can be used to adequate supplemental vitamin premix in test diet containing fish meal as protein source for juvenile Korean rockfish.