• Korea-Australia Rheology Journal
• /
• 제15권3호
• /
• pp.125-130
• /
• 2003

The emulsion stability of cosmetic creams based on the water-in-oil (W/O) high internal phase emulsions (HIPEs) containing water, squalane oil and cetyl dimethicone copolyol was investigated with various compositional changes, such as electrolyte concentration, oil polarity and water phase volume fraction. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The slope change of complex modulus versus water phase volume fraction monitored in the linear viscoelastic region could be explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsions: the greater the increase of complex modulus was, the more the coalescence occurred and the less consistent the emulsions were. Emulsion stability was dependent on the addition of electrolyte to the water phase. Increasing the electrolyte concentration increased the refractive index of the water phase, and thus decreased the refractive index difference between oil and water phases. This decreased the attractive force between water droplets, which resulted in reducing the coalescence of droplets and increasing the stability of emulsions. Increasing the oil polarity tended to increase emulsion consistency, but did not show clear difference in cream hardness among the emulsions.

• Tribology and Lubricants
• /
• 제17권2호
• /
• pp.146-152
• /
• 2001

Environmentally adapted synthetic base oils of polyalkylene glycols (PAGs) and polyol esters (POEs) show a high polarity because of their functional groups containing oxygen atom. The lubricating performance of these polar base oils was investigated by using a four-ball tribometer under boundary lubrication condition. Four polyalkylene glycols and five polyol ester base oils were used as sample base oils of high polarity. A mineral oil (MO) and alkylnaphthalene (AN) were used as low polarity base oils. Tricrecylphosphate (TCP) was added to all the base oils, in the range of 10 mmol/L-2000 mmol/L, as an antiwear additive. All the TCP-for-mutated base oils showed optimum concentration characteristics for minimizing wear. The order of optimum concentration of all the base oils was in a good accordance with the order of relative stability of TCP in base oils. The interaction model on solvation between additive and different polar base oils can expect the stability order of TCP. Thus, the model on solvation can explain well the order of optimum concentration of all the base oils, by using the effect of polarity (dielectric constant, $\varepsilon$) and molecular size (molecular weight, MW) of them on stability of TCP in polar base oils. Finally, a good correlation of the optimum concentration for all the base oils was obtained when it was arranged as a function of C∝(M $W_{Base Oil}$/M $W_{TCP}$)$^{-2}$.71/.($\varepsilon$$_{Base Oil}$)$^{3.38}$ by these two parameters.s..

• 대한화장품학회지
• /
• 제31권1호
• /
• pp.43-49
• /
• 2005

최근, 민감성 피부가 증가함에 따라 화장품의 안전성이 매우 중요시되고 있으며, 특히 방부제는 화장품 사용에 따른 부작용을 일으킬 수 있는 주요 자극원의 하나로 알려져 있다. 하지만, 방부제의 세포 독성 피부 투과, 유/수 분배, 항균력 비교 및 이를 통한 피부 자극과의 상관성 분석에 관한 연구는 전무한 실정이다. 본 연구의 목적은 상기의 여러 factor를 고려하여 화장품에서 빈번히 사용되고 있는 방부제의 하나인 phenoxyethanol을 이용한 저자극 방부시스템 개발에 관한 것이다. MTT assay를 통하여 human norm기 fibroblast cell에 대한 독성을 평가해 본 결과, 세포 독성은 propylparaben>butylparaben>ethylparaben>methylparaben>triciosan>phenoxyethanol 순으로 확인되어 phenoxyethanol이 다른 방부제에 비해 낮은 세포 독성을 나타낸 반면, 피부 일차자극을 알아보기 위하여 수행한 인체 첩포시험에서는 triclosan, methylparaben에 비해 높은 피부 자극을 나타내었다. 5 ${\~}$ 8 주령의 웅성 무모생쥐의 피부를 적출하여 in vitro Franz diffusion cell system을 이용한 방부제의 피부 투과도를 측정하여 본 결과, 피부 투과도는 phenoxyethanol > methylparaben > ethylparaben > propylparaben > butylparaben > triclosan 순으로 확인되어 세포 독성이 낮은 phenoxyethanol의 높은 피부 자극이 높은 피부 투과도와 연관성이 큰 것을 확인하였다. 따라서, 본 연구에서는 비교적 독성이 낮은 phenoxyethanol의 피부 투과도를 감소시킬 수 있는 방법을 찾고자 하였으며, 연구 결과, 제형내 polarity가 낮은 oil을 사용할 경우 phenoxyethanol의 피부 투과가 현격히 감소하며, 피부 자극도 감소함을 알 수 있었다. Oil polarity에 따른 Phenoxyethanol의 유/수 분배 측정 결과, Polarity가 낮은 oil에서는 $70\%$ 이상의 Phenoxyethanol이 수상에 존재한 반면, polarity가 높은 oil에서는 약 $70 {\~} 90\%$의 phenoxyethanol이 유상에 존재하였다. 또한, 미생물에 대한 항균력도 phenoxyethanol이 수상에 많이 존재할수록 증가하는 경향을 나타내었다. 따라서, 제형 내 oil tomposition을 변화시킴으로써 phenoxyethanol의 사용량을 줄일 수 있을 뿐만 아니라, 피부 투과를 감소시켜 보다 피부 자극이 적은 저자극 방부시스템 개발이 가능하리라 보여 진다.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.623-627
• /
• 2014

에멀젼은 섞이지 않은 두 물질을 분산시스템으로 혼합시켜 놓은 것이다. 에멀젼의 점도에 영향을 미치는 인자는 유화입자 크기, 연속상 및 분산상 종류, 연속상과 분산상의 비, 유화제 종류 및 유화기기 등 다양한 요소들이 있다. 본 연구에서는 오일 극성도에 따라 에멀젼의 점도 변화를 관찰하였고 이를 유기개념도를 이용하여 해석하였다. 탄화수소계, 에스테르계 및 실리콘계 오일을 사용하여 에멀젼을 제조하여 점도를 측정하였다. 오일 극성도가 높을수록 계면에 위치하는 유화제 및 유화안정제의 양이 적어지기 때문에 점도는 감소하였다. 극성 오일간 극성도를 수치적으로 비교하기 위해 유기개념도 이용하였으며 유기개념도상의 해석과 에멀젼의 점도 측정 결과가 실리콘 오일을 제외하고는 모두 일치하였다.

• 대한화장품학회지
• /
• 제22권2호
• /
• pp.20-40
• /
• 1996

The oil in water type ME of 4 component system was composed with POE monoalkyl ether and POE sorbitan monoalkyl ester as surfactant, saturated hydrocarbon, side chain structure and aromatic structure as oil, and glycerine as cosurfactant using high pressure homogenizer. The objective of this study was to examine the role of surfactant and oil structure on droplet size and stability. The experimental results showed that the droplet size was smaller with bigger polarity of oil, less hydrocarbon, longer hydrophilic chain of surfactant and higher concentration of glycerine. SQ and LP systems showed very stable but AB and ISB system unstable microemulsion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1552-1553
• /
• 2011

The HVDC transformer which is one of the main equipments for HVDC(High Voltage Direct Current) electric power transmission systems is exposed to not only AC voltage but also the inflowing DC voltage which comes from the DC-AC converter systems. Therefore, the HVDC transformer insulation system is required to withstand the electric field stress under AC, DC and DC polarity reversal conditions. However the electric field distributions under those conditions are different because the AC electric field and DC electric field are governed by permittivity and conductivity, respectively. In this study, the changes of electric potential and electric field of conventional AC transformer insulation system under DC polarity reversal test condition were analyzed by FEM(Finite Element Method). The DC electric field stress was concentrated in the solid insulators while the AC electric field stress was concentrated in the mineral oil. In addition, the electric stress under that condition which is affected by the surface charge accumulation at the interfaces between insulators was evaluated. The stress in some parts could be higher than that of AC and DC condition, during polarity reversal test. The result of this study would be helpful for the HVDC transformer insulation system design.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.338-343
• /
• 2011

In this paper, the FT-IR, conductivity and flow electrification phenomena of Vegetable oils were discussed. Vegetable oil has high flash point and eco-friendly properties compared to conventional mineral oil. Accelerated aging transformer oil samples produced in the oven at 140[$^{\circ}C$] for 500 hours, 1000 hours, 1500 hours, 2000 hours. Serial device to measure the flow electrification phenomena was designed and fabricated. Pico ammeter and the Labview data measurements were utilized. The effects of Temperature and antistatic agent on fluid flow electrification were investigated. Both Mineral and vegetable oil showed similar trends for temperature change. The polarity reversal occurred in mineral oil with antistatic agent above 10 ~ 30[ppm] and in vegetable oil with antistatic agent above 5[ppm].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1436-1437
• /
• 1998

In this paper, the result of experimental investigation into the streaming electrification phenomena of insulating oil under an external dc field effect is described. Energization by positive dc voltage enhanced the streaming electrification. but when the applied voltage was negative, the polarity of streaming current was field strength dependent.

• 대한전기학회논문지
• /
• 제40권6호
• /
• pp.619-625
• /
• 1991

Phenomena of streaming electrification of insulting oil(T.O) is studied where the oil is contacted with solid insulating materials when it is pumped through a circulating system in a large power transformer. The leakage current, the electrical potential at the neutral terminal point of the transformer and the surface electrical potential of the oil are investigated. And the leakage current from the neutral terminal point is measured as a function of a bias polarity applied to a transformer case to investigate the polarty of ion which is absorbed in the case at the interface between the case and oil. As a result, it is found that insulating materials, and it is suggested that the leakage current is the sum of the relaxation current by positive charge from insulating oil to the neutral terminal point and by electrification current from negative charge electrified by the contact with solid insulating materials.

• 전기의세계
• /
• 제26권6호
• /
• pp.78-85
• /
• 1977

This paper studies flashover voltage and surface corona loss of A.C and D.C in the mixed gas of air and SF$_{6}$ for solid insulators P.V.C, arcylic, glass and bakelite in two cases. In one case, those solids are covered with transformer oil and the other case, those solids are not covered with it. 1) The flashover voltage for each solids in SF$_{6}$ is more than three times compared with that in the air. The flashover voltage for P.V.C is the highest and then arcylic, glass, bakelite in a decreasing order. 2) The more the amount of SF$_{6}$ in the mixing ratio, the less corona loss. The P.V.C shows the least amount of corona loss and the bakelite the largest. 3) Compared with the corona loss of positive polarity and the negative polarity, the former has less corona loss than the latter. 4) The more the number of flashover discharge, the less insulation of each solids, but in case of bakelite, insulation almost vanishes after a couple of discharge. 5) When each insulator is covered with transformer oil, the flashover voltage generally increases and the corona loss decreases.eases.