• 한국분무공학회지
• /
• 제9권3호
• /
• pp.22-28
• /
• 2004

This study is concerned about the characteristics of ultrasonic-energy-added W/O type emulsified fuel. The distilled water was mixed with diesel oil by using ultrasonic energy fuel feeding system and then the SMD of sprayed droplets was measured to find out atomization characteristics of emulsified fuel by using the Malvern 2600 system. The capacitance value was measured to verify stability of the same specimen by using the digital LCR meter, EDC1630 additionally. The main results are as follows; 1) The more measuring distance increases between one hole nozzle tip and analyser bearm, the more SMD increases. 2) The more water content increases, the more capacitance value increases depending on the time. Main Parameters of the study are the amount of water content $0{\sim}30%$ by 5% in emulsified fuel, and the measurement distance, $20{\sim}140mm$ by 10mm or 20mm between nozzle tip and analyser beam.

• 한국식생활문화학회지
• /
• 제35권1호
• /
• pp.28-54
• /
• 2020

This study aims to investigate the food preservation methods adopted by the Joseon Dynasty, which existed before the 17^th century. A total of 232 food preservation methods were discovered in 25 books, and could be classified by their targeted food types: vegetables (84), sea foods (60), meats (41), fruits (37), and others (10). Depending on the preservation method applied, they are classified as food drying, soaking, mud cellar preservation, and other preservation. Food drying is further classified into 8 sub-types: drying, sun-drying, shadow-drying, wind-drying, dry heat, combined drying, smoking, and others. Soaking could be sub-divided into using salt, ash, dry sand, bran, fermented paste, wet distillers grains, oil, and others. Mud cellar preservation is sub-classified into installing shelf inside the mud cellar, making the mud cellar for food preservation, and making hole or underground tunnel for food preservation. Other food preservation methods include minimizing moisture loss by applying beeswax on a section of the vegetable stem, and cutting the vegetables or fruits with their branches and leaves for food preservation.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1616-1623
• /
• 2001

A basic experimental study has been carried out to find out the design parameters of fuel 2-staging atomizers in order to reduce nitrogen oxides(NOx) rate emitted from the steam boilers used the liquid fuel. The heavy fuel oil(B-Coil) and fuel 2-staging Y-jet twin-fluid atomizers were adopted in this study. The results of this paper were obtained from the real as well as the model scale atomizers. In the case of model atomizers test, NOx reduction rate was strongly dependent on the staged fuel rate, but it was weakly dependent on the injection hole arrangement and air swirl conditions. The real scale atomizers was designed and manufactured on the base of these test results, and those was mounted and operated in the real boiler generates 185 ton steam per an hour. The reduction rate of the model and real plant was reached 10∼30% of base NOx by atomizers. but dust was sharply increased in the low O$_2$combustion region of the real plant.

• 대한기계학회논문집B
• /
• 제20권4호
• /
• pp.1363-1375
• /
• 1996

Oil-film flow visualizations and three-dimensional flow measurements using a five-hole probe have been conducted to investigate three-dimensional flow characteristics and total pressure losses of a row of film-cooling jets injected in spanwise direction. For several span-to-diameter ratios, experiments are performed in the case of three velocity ratios of 0.5, 1.0 and 1.5. The flow measurements show that downstream flow due to the injection is characterized by a single streamwise vortex instead of a pair of counter-rotating vortices, which appear in the case of streamwise injection, and the vortex strength strongly depends on the velocity ratio. Regardless of the velocity*y ratio, presence of the spanwise film-cooling jets always produces total pressure loss, which is pronounced when the velocity ratio is large. It has also been found that the production of the total pressure loss is closely related to the secondary vortical flow. In addition, effects of the span-to-diameter ratio on the flow and total pressure loss are discussed in detail.

• Journal of Information Processing Systems
• /
• 제16권5호
• /
• pp.1008-1014
• /
• 2020

Aiming at the defect detection quality of denim fabric, this paper designs an improved algorithm based on the optimized Gabor filter. Firstly, we propose an improved defect detection algorithm of jean fabric based on the maximum two-dimensional image entropy and the loss evaluation function. Secondly, 24 Gabor filter banks with 4 scales and 6 directions are created and the optimal filter is selected from the filter banks by the one-dimensional image entropy algorithm and the two-dimensional image entropy algorithm respectively. Thirdly, these two optimized Gabor filters are compared to realize the common defect detection of denim fabric, such as normal texture, miss of weft, hole and oil stain. The results show that the improved algorithm has better detection effect on common defects of denim fabrics and the average detection rate is more than 91.25%.

• 열처리공학회지
• /
• 제2권2호
• /
• pp.27-32
• /
• 1989

The effect of quenchant temperature on the surface residual stress was studied for AISI 8620 steel. Specimens were carburized at $900^{\circ}C$ in all case type furnace using a gas-base atmosphere of methanol cracked and liquefied petroleum gas, and then subjected to single reheat quenchant in oil or salt bath in the temperature range of $60^{\circ}C$ to $300^{\circ}C$. After carburizing and reheat Quenching, residual stress was measured by the hole drilling method. Experimental results showed that the surface residual stress was increased as the quenchant temperature was raised. This is in contrast to the fact that the formation of phase of low transformation strain such as bainite results in lower surface compressive stress. The greater compressive stress observed in specimens Quenched at higher temperature may be attributed to the shifting of the transformation start point farther from the surface, as was reported in other carburizing steels.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.61-65
• /
• 2014

Construction heat insulating material for construction is used in large amounts in industry. In the manufacturing process of this insulation material, a thermal insulation material is completed while a polymer in a liquid state passes through Hall breaker. At this time, the quality and form of a product are determined by a hole in the breaker according to the oil pressure of the fluid and the change of the flow velocity. The friction wear action with regard to partner movement between the two levels of quality of materials affects the performance and the lifetimes of machine parts. In this study of a friction test, SM45C, which is a material used to create brake holes, was used. PVC was used to create the specimen. Moreover, an experiment divided a lubricous state and an unlubricated condition. The resulting value over the load of a pin, the revolving speed of a disk, and the standby state of an experimental result disk could be acquired.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.32-38
• /
• 2004

To evaluate the durability of direct injection diesel engine using biodiesel fuel, a small D. I. diesel engine was operated on a blend(BDF 20) of 20％ biodiesel fuel and 80％ diesel fuel for 200 hours. Engine dynamometer test was performed at a load of 90％ and a speed of 1900 rpm to monitor the engine performance and exhaust emissions. Engine performance parameters and exhaust emissions were sampled at 1 hour interval for analysis. The combustion maximum pressure and the crank angle at this maximum pressure as a combustion variation factor were considered to study the combustion characteristics of BDF 20 in diesel engine during durability test. As the results, the standard deviations and errors of combustion variation factors on BDF 20 were very little and combustion characteristics were very stable during the durability test. BDF 20 resulted in lower emissions of carbon monoxide, carbon dioxide, and smoke emissions with special increase of nitrogen oxides compared to diesel fuel. There was no also unusual change in engine oil composition from using BDF 20. Most of engine parts were clean and showed little wear, but soots were detected around the hole of fuel injector when BDF 20 was used in direct injection diesel engine for 200 hours.

• 설비공학논문집
• /
• 제21권7호
• /
• pp.409-416
• /
• 2009

On 21st century, global warming is the most serious environmental problem threatening the existence of lives on the earth. One of the serious reasons of this nature phenomena was due to the greenhouse effect by carbon dioxide mainly produced with the combustion process of hydro-carbon fuel. and it is mostly produced. In the high oil prices age, intensification of energy efficiency promotion in the building sector is required. Windows are dominating large percentage whole building loads, and are regarding as the primary target of energy efficiency. The purpose of this research is on the obtaining of the renewable energy source in the skyscrape buildings in the metropolitan area. The air movement is happens due to the atmospheric pressure differences in the air. Due to this simple physical theory, it is easily expected to obtain the useful renewable nature energy through the high -raised vertical air stack installed in a tall building. However, there is one problem that should be resolved which is called air-hole effect in the sky -scrape buildings.

• 지질공학
• /
• 제15권2호
• /
• pp.213-227
• /
• 2005

본 연구는 지하시험시설을 이용한 수리 지질환경 연구의 대안으로, 지하유류저장시설 건설과정 중 조사된 자료를 이용하여 지표조사단계에서 예측된 자료와 저장공동 굴착 시 확인된 자료의 대비를 통해 불확실성이 높은 단열 및 수리 인자의 지하분포특성을 해석하여 조사방법의 문제점을 도출하고 보완방안을 모색해 보고자 하였다. 지표조사단계에서 예측된 6개 단열대 중 지하공동 심도에서 그 위치와 방향이 비교적 일치하는 단열대는 WE-1 단 하나로 예측신뢰도는 매우 낮다. 본 연구에서는 지하공동 내 NE-1 단열대의 분포특성을 토대로 지표조사단계에서 BHTV 이미지를 이용한 정량적인 분류기준을 제시하였다. 암반단열은 심 도가 깊어짐에 따라 단열의 주 방향이 바뀌고 길이 및 빈도는 감소하는 경향을 보이고 있다. 조사대상의 경사변화와 조사방향 및 조사규모 등에 따라 오차가 발생될 수 있으므로 조사에 따른 편의 (investigation bias)를 가능한 한 최소화하여야 할 것이다. 지표조사단계에서 수리적 연결성에 대한 해석은 시추공 내에서 주입이나 양수를 통한 지하수체의 교란 시 구간에 따른 수리지질학적 특성파악이 가능한 이중수위측정시설이나 다중패커시스템을 통하여 수위 변화 및 지하수의 지화학특성에 대한 구간별 정밀계측이 요구된다. 수직 및 수평 수벽공에 의해 계측된 공동주변 수리 전도도의 기하평균은 지표조사 시 지표부 파쇄대 및 풍화대 영역을 제외한 평균값보다 약 $2\~3$배 작은 값을 나타내며, 수평수벽공의 기하평균 역시 수직수벽공보다 약 6배정도 작게 나타났다. 수리 전도도 역시 신뢰도 향상을 위해서는 시험공의 경사방향이 편중되지 않도록 조사편의를 최소화하고, 매질의 특성 및 시험목적을 고려하여 시험방법 및 해석식이 적용되어야 할 것으로 판단된다. tazanowskii), 쉬리 (Coreleuciscus splendidus). 새코미꾸리 (Koreocobitis rotundicaudata), 퉁가리 (Liobagrus andersoni) 등 8종이었고, 반대로 영동수계에서 영서수계로 도입된 종은 산천어 (O. masou masou) 1종이었다. 또한 각 지점간 출현종을 근거로 하여 유사거리를 측정하여 집괴 분석을 실시한 결과 크게 4집단으로 나누어 졌으며 특히 몇몇 지점에서 지리적인 분포보다는 인위적 분포양상에 의한 어류교란이 발견되었다. 수술합병증으로 수술 전후의 심근경색증 9예$(5.8\%)$, 저심박출증 17예$(11\%)$, 부정맥 30예$(19.5\%)$등이었다. 결론: 국립의료원 흉부외과에서는 관상동맥 우회술을 시작한 이래 수술경험의 축적, 비체외순환하 관상동맥 우회술의 도입, 내흉동맥 및 요골동맥으로의 이식편 이용 변화에 따라 수술성적이 향상되었음을 알 수 있으며, 향후 더 많은 임상경험의 축적 및 장기 추적 관찰이 필요하다고 사료된다.보였으며, 난중, 난황색, 난백고 및 Haugh unit는 처리 간 차이(p>0.05)가 없었다.이고, 환자 1인당 Wedge filter의 교체작업이 $1{\sim}2$회일 때 10MV의 경우 연간선량이 $0.08{\sim}0.4mSv$로 평가되었으며, 15MV의 경우 $0.27{\sim}1.36mSv$로 평가되어 작업종사자의 연간 허용선량인 20mSv에 비해 안전한 것으로 평가되었다.서 정상조직이 적게 조사되었다. 결과 : 기존의 ICRU계획은 그 효과 및 안전성이 입증되었음에도 불구하고 CT를 이용한 CTV계획 등을 적용 한다면 잔류종양이 적은