• 보존과학회지
• /
• 제36권6호
• /
• pp.505-510
• /
• 2020

본 연구에서는 전통적인 방법으로 재현한 전통 명유, 전통 명유를 과학적으로 분석하여 친환경적인 방법으로 개발한 크린 명유, 그리고 명유의 원료이자 현재 목조문화재를 보수할 때 단청의 마감제로 사용되고 있는 생들기름의 방미효력을 평가하였다. 평가 결과, 생들기름은 방미효력이 거의 없는 것으로 나타난 반면에, 두 종류의 명유는 모두 높은 성능의 방미효력을 보였다. 하지만, 명유를 천연용제인 테르펜유에 희석하여 사용하면 균주에 노출된 지 4주 만에 방미효력이 현저히 감소하는 것을 확인 할 수 있었다. 목재에 처리된 약제의 함량이 명유의 방미효력에 영향을 주는 것으로 판단된다. 즉, 목조건축물을 축조함에 있어서 명유가 들기름보다 곰팡이 발생을 억제하기 위한 마감제로 더 적합하며, 야외 환경에서의 곰팡이 성장 억제를 저해 할 수 있는 최적의 처리량 및 처리 방법에 대한 추가 연구를 통하여 명유의 적용 가능성을 높힐 수 있을 것으로 생각한다.

• 한국염색가공학회지
• /
• 제10권4호
• /
• pp.1-6
• /
• 1998

It is important in the durable water and oil repellent finishing for wool fabric what kinds of water-repellent agents will be used. Water repellent agents and its concentration were aleady chosen in the previous paper, one of the crosslinking agents which has less damages(harsh handle or yellowing) to the treated fabrics was a low molecular weight urethane-based resins(eg. Elastron BN-11). In repellent finishing, fabrics were padded in a bath which contained aqueous solution of water-repellent agents, and crosslinking agents, and wetting agents, followed by drying and curing. The most suitable treating condition for excellent repellency and durability to dry-cleaning was as follows ： Fabrics are padded at liquor pick-up ratio of 50%, with aqueous solution which contained $30g/\ell$ of water-repellent agents, and $1g/\ell$ of crosslinking agents, and 40g/s of wetting agents. And the padded fabrics were dried at $110^\circ{C}$ for 1 minute, and cured at $160^\circ{C}$ for 1 minute. For the fabrics, water and oil repellencies and durability to repeated dry-cleanings were observed. For enhancing the durability to dry-cleaning, the role of crosslinking agents was important for they bonds water-repellent agents and fibers to 3-dimensional net structure. Therefore, the most suitable drying and curing conditions should be selected according to the kinds of crosslinking agents.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권6호
• /
• pp.811-818
• /
• 2017

Objective: This experiment was conducted to investigate the effects of fungal treated oil palm fronds (FTOPF) on performance, carcass traits, meat quality, and muscle chemical composition. Methods: Eighteen growing crossbred male goats (Thai Native${\times}$Anglo Nubian) with $18.7{\pm}2.0kg$ of initial body weight (BW) were stratified and blocked by BW in a randomized complete block design. Three diets containing 30% of oil palm fronds (OPF) either untreated (UOPF) or treated with Lentinussajor-caju (FTOPF) with or without urea (FTOPFU) were used as roughage sources in total mixed rations (TMRs). The diets were offered ad libitum and weight gain was determined. At the end of the experimental period, the harvest data and carcass characteristics of the goats were recorded, and muscular longissimus dorsi composition was determined. Results: No significant effect of fungal treated (FT) inclusion was observed in any of the feed intake, growth performance, and carcass characteristics. Likewise, no apparent effects on carcass composition and muscle chemical composition were detected in this study, except for hind leg and chump were affected (p<0.05) by FT inclusion. Conclusion: In conclusion, feeding of fungal (Lentinussajor-caju) treated oil palm frond in TMR diet did not affect performance and carcass characteristics in finishing goats.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권12호
• /
• pp.1759-1767
• /
• 2012

This study was performed to determine the effects of dietary fat sources, i.e., beef tallow, soybean oil, olive oil and coconut oil (each 3% in feed), on the growth performance, meat quality and gene expression in growing-finishing pigs. A total of 72 crossbred pigs (Landrace${\times}$Large White${\times}$Duroc) were used at $71{\pm}1$ kg body weight (about 130 d of age) in 24 pens ($320{\times}150$ cm) in a confined pig house (three pigs per pen) with six replicate pens per treatment. The growing diet was given for periods of $14{\pm}3$ d and the finishing diet was given for periods of $28{\pm}3$ d. The fat type had no significant effect either on growth performance or on chemical composition or on meat quality in growing-finishing pigs. Dietary fat type affected fatty acid composition, with higher levels of unsaturated fatty acids (UFAs) and monounsaturated fatty acids (MUFAs) in the olive oil group. Microarray analysis in the Longissimus dorsi identified 6 genes, related to insulin signaling pathway, that were differentially expressed among the different feed groups. Real time-PCR was conducted on the six genes in the longissimus dorsi muscle (LM). In particular, the genes encoding the protein kinase, cAMP-dependent, regulatory, type II, alpha (PRKAR2A) and the catalytic subunit of protein phosphatase 1, beta isoform (PPP1CB) showed the highest expression level in the olive oil group (respectively, p<0.05, p<0.001). The results of this study indicate that the type of dietary fat affects fatty acid composition and insulin signaling-related gene expression in the LM of pigs.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.256-273
• /
• 2023

Among the dyeing industries, the tenter process is a process that improves the quality of fibers by drying and ironing (heat treatment) dyed fabrics, and drugs such as water repellents, antistatic agents, and fiber softeners are mainly used in these tenter processes. These drugs are vaporized in the process of treatment by high temperatures (180 ~ 230℃), and are observed in a complex form such as white smoke, oil mist, and fine dust, causing odor. To treat the complex exhaust gas at the rear end of the tenter facility, most companies operate by installing a wet scrubber and an adsorption tower alone or in parallel, but there are many problems. In particular, the insoluble oil mist at the rear end of the tenter has significantly low processing efficiency in the cleaning dust collection facility, and there is a problem in the facility by adsorption due to the occlusion phenomenon caused by the oil mist. In addition, the odor gas at the rear end of the tenter contains a lot of aldehydes, and in order to improve these various problems, a complex exhaust purification device using cyclone and electric support collector was developed. This study examined the applicability of economical and efficient technology by removing complex air pollution at the rear end of the tenter and applying improved technology than the existing technology.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.257-263
• /
• 2010

Oil-absorbable nonwovens were produced by meltblown processing of polypropylene chips. In this study, experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. Oil absorbency was decreased, as oil absorbable nonwovens of packing density and gearpump speed were increased. Oil absorption rate was increased, as packing density was increased. Also the oil absorption rate increased with increasing gear-pump speed.

• 한국염색가공학회지
• /
• 제8권5호
• /
• pp.76-83
• /
• 1996

Fragrant microcapsules were prepared by in situ polymerization using urea-formaldehyde prepolymer. Lemon oil and migrin oil as susceptible materials were used. The diameter and distribution of the microcapsule were controlled by several factors, such as wall material, core material content, emulsion agent and stirring speed, respectively. Susceptible cotton fabrics with fragrant release functionality were successfully produced by using microcapsule containing fragrant materials.

• 건축역사연구
• /
• 제32권5호
• /
• pp.107-117
• /
• 2023

There are records and claims that tung oil was applied to Korean traditional buildings and furniture as finishing paint. Records of the use of tung oil(桐油) exist in the Annals of the Joseon Dynasty(朝鮮王朝實錄) and The Royal Protocols of the Joseon Dynasty(朝鮮王朝儀軌). However, there is also a claim that tung oil was not produced in Korea on its own, and that tung oil was not applied to important buildings such as palaces. Silhak scholar(實學者) Seo Yu-gu says that in Korea, people do not know how to grow tung trees, and boiled perilla oil is called tung oil. If tung oil was used in the Joseon Dynasty, it would be necessary to use tung oil for waterproof coating to preserve current architectural heritage, otherwise, tung oil coating would not be desirable. Analyzing the Yeonggeon Uigwe(營建儀軌) among the Joseon Dynasty's Uigwes shows that tung oil is neither mentioned nor used. In addition, as a result of analyzing the Uigwes mentioned in tung oil, it was found that perilla oil or Myeongyu(明油), not tung oil, was recorded in the actual material used. Therefore, the records of the use of tung oil during the Joseon Dynasty can be seen as records using Myeongyu(明油) or Beopryeon perilla oil(法煉荏油).

• 한국염색가공학회지
• /
• 제21권6호
• /
• pp.22-28
• /
• 2009

Oil-absorbable nonwovens were produced by melt-blown processing of polypropylene chips. The melt-blown processing conditions, such as air pressure, and gear pump speed, DCD. In this study, these three factors were chosen to produce samples. Experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. The effect of the factors on oil absorption properties of melt-blown nonwoven fabric such as oil absorbency were evaluated. As a result, the fiber diameter decreased as gearpump speed decreased or air pressure increased. The oil absorbency increased as air pressure increased or gearpump speed decreased and with the DCD increasing the oil absorbency significantly increased.

• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.24-35
• /
• 1999

This study was carried out to investigate the changes of surface characteristics of polyester fabrics on the deposition and the removal of oily soils from polyester fabrics in detergency, The relations between the removal of soil and the changes of surface properties of polyester fabrics treated with water- and oil-repellent agents were discussed before and after various wash cycles. Two kinds of fluoropolymers were selected as water-and oil-repellent finishing agents. The effects of water- and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respect to contact angle and wicking time. The treatment of polyester fabrics with fluoropolymers improved efficiently water repellency, oil repellency, contact angle and wicking time. But those properties were greatly decreased after 3 times of wash cycles in detergency The deposition of oily soils on the untreated fabrics was drastically increased with increasing of wash cycles. The deposition and the removal of oily soils from fabrics treated with fluoropolymer having hydrophobic components were very low after various wash cycles. The deposition and the removal of oily soils on the fabrics treated with fluoropolymer having hydrophilic components were high comparatively after various wash cycles. Even though the surface properties of treated fabrics were greatly decreased with the increasing of wash cycles, the remains of oily soils on the fabrics were lower than those of untreated fabrics in various wash cycles. But the remains of soils were drastically increased after 10 times of wash cycles in any cases.